Kai Yang 
- (2024): Experimental and numerical study on extended endplate beam-column joints after high temperature to resist progressive collapse. In: Journal of Constructional Steel Research, v. 219 (August 2024).
- (2024): Long-term mechanical performance analysis of post-grouting prestressed resin bolt under anchorage creep. In: Tunnelling and Underground Space Technology, v. 149 (July 2024).
- (2016): Energy absorption of thin-walled tubes with pre-folded origami patterns: Numerical simulation and experimental verification. In: Thin-Walled Structures, v. 103 (June 2016).
- (2021): Multisource monitoring and early warning system of rock burst in the Gaoloushan deep-buried tunnel. In: IOP Conference Series: Earth and Environmental Science, v. 861, n. 4 (1 October 2021).
- (2023): Mitigation of autogenous shrinkage of alkali-activated slag mortar by stearate salts. In: Construction and Building Materials, v. 384 (June 2023).
- (2023): Insight into the flexural characteristics of rapid hardening ultra-high performance concrete (RH-UHPC) incorporating C-S-H seeds using acoustic emission technology. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Loss of preload of unprotected bolted joints considering environmental effects: A comparative study. In: Journal of Constructional Steel Research, v. 211 (December 2023).
- (2023): Exploring decision-making mechanisms for the metro-based underground logistics system network expansion: An example of Beijing. In: Tunnelling and Underground Space Technology, v. 139 (September 2023).
- (2023): Investigation on effect of EVA on properties of desert sand-based permeable materials. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Insights into the efficiency loss of naphthalene superplasticizer in alkali-activated slag pastes. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): Enhancement in strength and toughness of ultra-high performance concrete (UHPC) from micron- and nano-scale. In: Journal of Building Engineering, v. 69 (June 2023).
- (2023): Modeling Real-time operations of Metro-based urban underground logistics system network: A discrete event simulation approach. In: Tunnelling and Underground Space Technology, v. 132 (February 2023).
- (2022): Experimental investigation on flexural and compressive toughness of mortar and concrete with hybrid toughening materials. In: Structures, v. 43 (September 2022).
- (2022): Mechanical properties of ultra-high strength cement-based materials (UHSC) incorporating metal powders and steel fibers. In: Construction and Building Materials, v. 318 (February 2022).
- (2021): Mitigation of efflorescence of alkali-activated slag mortars by incorporating calcium hydroxide. In: Construction and Building Materials, v. 298 (September 2021).
- (2021): Influence of carbonation on the bound chloride concentration in different cementitious systems. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Explosion Disaster Distribution Characteristics and Outlet Open-Close Effect of Turning Roadway. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2020): Influence of Multiple Factors on the Explosion Characteristics of Flammable Gases in Municipal Sewage Pipelines. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Monitoring analysis of a deep foundation pit construction adjacent to old buildings. In: IOP Conference Series: Materials Science and Engineering, v. 780 (April 2020).
- (2020): Evaluation of interlayer stability in asphalt pavements based on shear fatigue property. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Magnet-induced monostable nonlinearity for improving the VIV-galloping-coupled wind energy harvesting using combined cross-sectioned bluff body. In: Smart Materials and Structures, v. 29, n. 7 (May 2020).
- (2019): Influence of axial loads on CO2 and Cl− transport in concrete phases: Paste, mortar and ITZ. In: Construction and Building Materials, v. 204 (April 2019).
- (2016): Isoparametric closure elements in boundary element method. In: Computers & Structures, v. 168 (May 2016).
- (2012): A micromechanical approach to investigate asphalt concrete rutting mechanisms. In: Construction and Building Materials, v. 30 (May 2012).
- (2013): Micromechanical investigation of open-graded asphalt friction courses' rutting mechanisms. In: Construction and Building Materials, v. 44 (July 2013).
- (2017): Investigation of effects of Portland cement fineness and alkali content on concrete plastic shrinkage cracking. In: Construction and Building Materials, v. 144 (July 2017).
- (2013): Investigation of asphalt concrete rutting mechanisms by X-ray computed tomography imaging and micromechanical finite element modeling. In: Materials and Structures, v. 46, n. 6 (June 2013).
- (2016): Estimates of concrete transport properties by a two pressure water test. In: Magazine of Concrete Research, v. 68, n. 10 (May 2016).
- (2014): Investigation of a bistable dual-stage vibration isolator under harmonic excitation. In: Smart Materials and Structures, v. 23, n. 4 (April 2014).
- (2018): First structural use of site-cast, alkali-activated slag concrete in China. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 171, n. 10 (October 2018).
Structurae cooperates with
