Fan Yang 
- (2024): Prompt-based automation of building code information transformation for compliance checking. In: Automation in Construction, v. 168 (December 2024).
- (2024): Preparation and performance evaluation of waterborne epoxy resin modified emulsified asphalt binder. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): A new seismic metamaterial design with ultra-wide low-frequency wave suppression band utilizing negative Poisson's ratio material. In: Engineering Structures, v. 319 (November 2024).
- (2024): A partially hollow BCC lattice structure with capsule-shaped cavities for enhancing load-bearing and energy absorption properties. In: Engineering Structures, v. 305 (April 2024).
- (2024): Retardation mechanism of phosphogypsum in phosphogypsum-based excess-sulfate cement. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Scientometric Analysis and Visualization of Carbon Emission Studies in the Construction Industry. In: Buildings, v. 14, n. 4 (27 March 2024).
- (2023): Research on Shear Strength Parameters of the Silty Fine Sand and the Rounded Gravel Layers in Nanning City. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2024): Project-Based Introduction to Computing in Construction Management Curriculum: A Case Study. In: Journal of Civil Engineering Education, v. 150, n. 1 (January 2024).
- (2023): Quaternary ammonium silane modified Nanolime for the consolidation and antifungal of stone relics. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Research on Static Behavior of Stud Shear Connectors after Strong-corrosion Based on Push-out Test. In: KSCE Journal of Civil Engineering, v. 27, n. 8 (June 2023).
- (2023): Push-Out experiments on bearing capacity of perfobond leiste shear connectors after hydrochloric acid corrosion. In: Advances in Structural Engineering, v. 26, n. 9 (May 2023).
- (2023): A novel inchworm piezoelectric actuator using two-stage amplification mechanism with high speed: design, modeling, and experimental evaluation. In: Smart Materials and Structures, v. 32, n. 5 (March 2023).
- (2023): A novel hybrid auxetic honeycomb with enhanced load-bearing and energy absorption properties. In: Engineering Structures, v. 289 (August 2023).
- (2024): A new model to simulate the site-specific traffic load with consideration of precise axle load and microscopic behavior. In: Structure and Infrastructure Engineering, v. 20, n. 6 (October 2024).
- (2022): Novel kitchen ventilation system with the cabinet-bottom air supply. In: Journal of Building Engineering, v. 60 (November 2022).
- : Numerical Investigation for the Bearing Performance of the Segmental Joint with Elastic Gasket. In: Periodica Polytechnica Civil Engineering.
- (2022): Research on three-part heating cost method based on heating consumption reallocation and game theory. In: Energy and Buildings, v. 261 (April 2022).
- (2022): Numerical Investigation of the Segmental Lining Performance for a Shield Tunnel. In: KSCE Journal of Civil Engineering, v. 26, n. 5 (22 March 2022).
- (2021): Numerical simulation and wind tunnel experiments on the effect of a cubic building on the flow and pollutant diffusion under stable stratification. In: Building and Environment, v. 205 (November 2021).
- (2021): Numerical simulation for structural behaviour of stainless steel web cleat connections. In: Journal of Constructional Steel Research, v. 183 (August 2021).
- (2019): Quantitative study on adjacent room heat transfer: Heating load and influencing factors. In: Sustainable Cities and Society, v. 51 (November 2019).
- (2021): An occupancy prediction model for campus buildings based on the diversity of occupancy patterns. In: Sustainable Cities and Society, v. 64 (January 2021).
- (2015): Origin-Destination Estimation for Non-Commuting Trips Using Location-Based Social Networking Data. In: International Journal of Sustainable Transportation, v. 9, n. 8 (April 2015).
- (2021): Numerical study and strength model of concrete-filled high-strength tubular flange beam under mid-span load. In: Engineering Structures, v. 229 (February 2021).
- (2021): Self-resonance Eddy-current Testing Method in Noncontact Detection of Carbon Fiber Reinforced Plastics. In: Composite Structures, v. 259 (March 2021).
- (2020): Perforation of needle-punched carbon-carbon composites during high-temperature and high-velocity ballistic impacts. In: Composite Structures, v. 245 (August 2020).
- (2020): Non-destructive testing of carbon-fiber-reinforced plastics with a PCB-based T-R probe. In: Composite Structures, v. 240 (May 2020).
- (2019): Reinforcement Analysis of Rigid Hangers for Existing Old Arch Bridges: A Case Study of Ling Bridge. In: International Journal of Steel Structures, v. 19, n. 6 ( 2019).
- (2018): Performance of the Prestressed Composite Lining of a Tunnel: Case Study of the Yellow River Crossing Tunnel. In: International Journal of Civil Engineering, v. 16, n. 2 (January 2018).
- (2017): A new structure for continuously reinforced concrete pavement with road performance evaluation. In: Construction and Building Materials, v. 157 (December 2017).
Structurae cooperates with
