Fan Yang 
- (2015): Influence of Frequency-Dependent Dynamic Parameters of Rail Pads on Environmental Vibration Induced by Subways in a Tunnel. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2476, n. 1 (January 2015).
- (2024): Investigation of Maxima Assumptions in Modelling Tropical Cyclone-Induced Hazards in the South China Sea. In: China Ocean Engineering, v. 38, n. 3 (May 2024).
- (2024): Make-up air optimization and demand exhaust rate of commercial kitchens under multiple cookers operation. In: Journal of Building Engineering, v. 89 (July 2024).
- (2024): Mechanical performance of Q345 steel after corrosion: Experimental and theoretical investigation. In: Structures, v. 62 (April 2024).
- (2023): Mechanical properties and soluble phosphorus solidification mechanism of a novel high amount phosphogypsum-based mortar. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Investigation of “elephant skin” on UHPC surface via a new test method: Influencing factors, formation mechanism and control measures. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): A joint fraction function regularization model for the structural damage identification. In: Advances in Structural Engineering, v. 27, n. 2 (11 December 2023).
- (2023): A multi-task learning model for fast prediction of mechanical behavior of UD-CFRP composites under transverse tension. In: Composite Structures, v. 324 (November 2023).
- : Job crafting intervention for job burnout and work engagement among young construction project management practitioners in China. In: Engineering, Construction and Architectural Management.
- (2023): An intelligent impact load identification and localization method based on autonomic feature extraction and anomaly detection. In: Engineering Structures, v. 291 (September 2023).
- (2022): Mechanical and Thermal Properties of Shale Ceramsite Concrete: Experimental Study on the Influence Law due to Microencapsulated Phase-Change Material Content and Phase-Change Cycle Numbers. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Influence of aggregate reinforcement treatment on the performance of geopolymer recycled aggregate permeable concrete: From experimental studies to PFC 3D simulations. In: Construction and Building Materials, v. 354 (November 2022).
- (2023): Location correction factor for household heat metering and its influencing factors. In: Journal of Building Engineering, v. 64 (April 2023).
- (2022): Influence of Recycled Concrete Fines Content on the Dynamic Mechanical Properties of Coal Mine Roadway Support Mortar. In: KSCE Journal of Civil Engineering, v. 26, n. 11 (September 2022).
- (2022): Investigating on polymerization process and interaction mechanism of thermosetting polyurethane modified asphalt. In: Construction and Building Materials, v. 335 (June 2022).
- (2022): The load-slip characteristics of stud shear connector after hydrochloric acid corrosion. In: Structures, v. 41 (July 2022).
- (2022): Laboratory investigation on the cracking performance of paving polyurethane mixture using semi-circular bending test. In: Construction and Building Materials, v. 341 (July 2022).
- (2016): Merging Preparation Behavior of Drivers: How They Choose and Approach Their Merge Positions at a Congested Weaving Area. In: Journal of Transportation Engineering, v. 142, n. 9 (September 2016).
- (2021): Laboratory Evaluation on Pavement Performance of Polyurethane Mixture for Thin Overlay. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021).
- (2021): Influence of porosity of reformed earth embankment windbreak wall on flow field and displacement of catenary under crosswinds. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 214 (July 2021).
- (2021): A Model Study of Building Seismic Damage Information Extraction and Analysis on Ground-Based LiDAR Data. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): An investigation of fire evacuation performance in irregular underground commercial building affected by multiple parameters. In: Journal of Building Engineering, v. 37 (May 2021).
- (2016): Mechanical and oxidation properties of C/SiC corrugated lattice core composite sandwich panels. In: Composite Structures, v. 158 (December 2016).
- (2019): Mechanical property of C/SiC corrugated lattice core composite sandwich panels after high temperature annealing. In: Composite Structures, v. 210 (February 2019).
- (2021): Lateral-torsional buckling behaviour of concrete-filled high-strength steel tubular flange beams under mid-span load. In: Journal of Constructional Steel Research, v. 176 (January 2021).
- (2020): Mechanical and piezoelectric properties of ECC with CNT incorporated through fiber modification. In: Construction and Building Materials, v. 260 (November 2020).
- (2019): A method to evaluate the segregation of compacted asphalt pavement by processing the images of paved asphalt mixture. In: Construction and Building Materials, v. 224 (November 2019).
- (2019): Influence of weld details on fracture behavior of connections using high-strength steel. In: Journal of Constructional Steel Research, v. 153 (February 2019).
- (2018): Job Burnout of Construction Project Managers: Considering the Role of Organizational Justice. In: Journal of Construction Engineering and Management, v. 144, n. 11 (November 2018).
- (2018): Mechanical behavior of two kinds of prestressed composite linings: A case study of the Yellow River Crossing Tunnel in China. In: Tunnelling and Underground Space Technology, v. 79 (September 2018).
Structurae cooperates with
