Dong Yang 
- (2024): Machine learning-Based method for gas leakage source term estimation in highway tunnels. In: Tunnelling and Underground Space Technology, v. 154 (December 2024).
- (2024): Identification of Damage Modes and Critical States for FRP/Steel-Concrete Composite Beams Based on Acoustic Emission Signal Analysis. In: Buildings, v. 14, n. 8 (23 July 2024).
- (2024): Prediction model of buoyancy-driven flow rate in inclined tunnels with a localized buoyancy source: Emphasis on stratification effects. In: Building and Environment, v. 250 (February 2024).
- (2023): Mechanical properties of bolted steel laminated flattened-bamboo lumber connections under cyclic loading. In: Construction and Building Materials, v. 385 (July 2023).
- (2023): Performance of single-bolted laminated flattened-bamboo connection with steel plate under compression parallel to grain – An experimental and numerical study. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): MobileNetV3-BLS: A broad learning approach for automatic concrete surface crack detection. In: Construction and Building Materials, v. 392 (August 2023).
- (2024): Interfacial bond behavior between normal OPC concrete and self-compacting geopolymer concrete enhanced by nano-SiO2. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Large-scale baseline model exploration from structural monitoring based on a novel information entropy-probability learning function. In: Computers & Structures, v. 292 (February 2024).
- (2022): Preliminary study on preparation of unfired bricks using filter cake from tunnel muck. In: Journal of Building Engineering, v. 60 (November 2022).
- (2022): Integrating phase change material in building envelopes combined with the earth-to-air heat exchanger for indoor thermal environment regulation. In: Building and Environment, v. 221 (August 2022).
- (2022): Microscopic Bearing Behavior of Horizontally Loaded Vertical Plate Anchors in Sandy Soil. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2017): Fatigue crack monitoring using plastic optical fibre sensor. In: Procedia Structural Integrity, v. 5 ( 2017).
- (2021): Non-linear behaviour and failure mechanism of bamboo poles in bending. In: Construction and Building Materials, v. 305 (October 2021).
- (2019): Investigation of the performance of a cylindrical PCM-to-air heat exchanger (PAHE) for free ventilation cooling in fluctuating ambient environments. In: Sustainable Cities and Society, v. 51 (November 2019).
- (2016): Operational modal analysis of structures by stochastic subspace identification with a delay index. In: Structural Engineering and Mechanics, v. 59, n. 1 (July 2016).
- (2021): Mechanical properties of large-scale parallel bamboo strand lumber under local compression. In: Construction and Building Materials, v. 271 (February 2021).
- (2020): Meso-scale study on compaction characteristics of asphalt mixtures in Superpave gyratory compaction using SmartRock sensors. In: Construction and Building Materials, v. 262 (November 2020).
- (2013): A model for analysis of convection induced by stack effect in a shaft with warm airflow expelled from adjacent space. In: Energy and Buildings, v. 62 (July 2013).
- (2015): Natural ventilation of lower-level floors assisted by the mechanical ventilation of upper-level floors via a stack. In: Energy and Buildings, v. 92 (April 2015).
- (2020): Influences of vent location on the removal of gaseous contaminants and indoor thermal environment. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Prevention of multiple patterns of combined buoyancy- and pressure-driven flow in longitudinally ventilated sloping multi-branch traffic tunnel fires. In: Tunnelling and Underground Space Technology, v. 103 (September 2020).
- (2020): Experimental study on the performance of hybrid ventilation system combining forced longitudinal flow and shaft natural ventilation in tunnels. In: Tunnelling and Underground Space Technology, v. 103 (September 2020).
- (2020): On the backlayering flow of the buoyant contaminants in a tunnel with forced longitudinal ventilation. In: Building and Environment, v. 175 (May 2020).
- (2020): Mechanical Properties of Tunnel Muck with Fly-Ash Geopolymer. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2018): Propagation and entrainment of buoyancy-driven flows in a narrow horizontal space and implications for buoyant contaminant transport under natural ventilation. In: Building and Environment, v. 132 (March 2018).
- (2014): The response of human thermal perception and skin temperature to step-change transient thermal environments. In: Building and Environment, v. 73 (March 2014).
- (2020): Investigation of physicochemical and rheological properties of SARA components separated from bitumen. In: Construction and Building Materials, v. 235 (February 2020).
- (2019): A novel fatigue crack monitoring method based on nonlinear dynamic characteristics of strain. In: International Journal of Structural Stability and Dynamics, v. 20, n. 1 (November 2019).
- (2017): Multiple steady states of fire smoke transport in a multi-branch tunnel: Theoretical and numerical studies. In: Tunnelling and Underground Space Technology, v. 61 (January 2017).
- (2015): method for design of smoke control of urban traffic link tunnel (UTLT) using longitudinal ventilation. In: Tunnelling and Underground Space Technology, v. 48 (April 2015).
Structurae cooperates with
