Bing Xu 
- (2024): A novel hydraulic swing actuator with high torque density for legged robots. In: Smart Materials and Structures, v. 34, n. 1 (19 December 2024).
- (2024): Effect of Boundary Conditions and Angles on the Compressive Performance of the Corner Element. In: Buildings, v. 15, n. 1 (24 December 2024).
- (2025): Research on the physical characteristics of a novel modified foamed cement slurry with non-foamed PVA material. In: Construction and Building Materials, v. 459 (January 2025).
- (2024): A Method for the Coefficient Superposition Buckling Bearing Capacity of Thin-Walled Members. In: Buildings, v. 14, n. 10 (8 October 2024).
- (2024): Vibration-polynomial-based optimal trajectory planning for mobile concrete pumping equipment with state constraints. In: Automation in Construction, v. 158 (February 2024).
- (2023): PSO-based Machine Learning Methods for Predicting Ground Surface Displacement Induced by Shallow Underground Excavation Method. In: KSCE Journal of Civil Engineering, v. 27, n. 11 (22 September 2023).
- (2024): The Numerical Study on the Blast Resistance Performance of Protection Armor with I-Core Sandwich. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 48, n. 2 (January 2024).
- (2023): Cyclic compressive behavior of hook-end steel and macro-polypropylene hybrid fiber reinforced recycled aggregate concrete. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): The Influence of Integral Water Tank on the Seismic Performance of Slender Structure: An Experimental Study. In: Buildings, v. 13, n. 3 (26 February 2023).
- (2022): Study on Axial Load Mechanical Behavior of Square Concrete-Filled Tubular Steel Stub Column with Gap. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 47, n. 2 (July 2022).
- (2022): Study on Failure Performance of the Thin-Walled Steel-Reinforced Concrete Pier under Low Cyclic Loading. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Analysis of Buckling Deformation for the Side Plate of Rectangular CSFT Column Based on Plate Theory with Bi-Axial Loads. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Human-machine interface for a master-slave hydraulic manipulator with vision enhancement and auditory feedback. In: Automation in Construction, v. 136 (April 2022).
- (2007): A Multiclass and Multicriteria Stochastic Traffic Network Equilibrium Variational Inequality Model with Fixed Demand. In: Journal of Highway and Transportation Research and Development (English Edition), v. 2, n. 2 (December 2007).
- (2019): In-plane crashworthiness of re-entrant hierarchical honeycombs with negative Poisson’s ratio. In: Composite Structures, v. 229 (December 2019).
- (2019): Debonding damage detection of the CFRP-concrete interface based on piezoelectric ceramics by the wave-based method. In: Construction and Building Materials, v. 210 (June 2019).
- (2016): Bumpless mode switch of independent metering fluid power system for mobile machinery. In: Automation in Construction, v. 68 (August 2016).
- (2015): Pump/valves coordinate control of the independent metering system for mobile machinery. In: Automation in Construction, v. 57 (September 2015).
- (2014): An automatic three-dimensional loading apparatus for static tests of truss joints. In: Automation in Construction, v. 48 (December 2014).
- (2013): Improving the performance of IPMCs with a gradient in thickness. In: Smart Materials and Structures, v. 22, n. 11 (November 2013).
- (2018): Programmable hydraulic control technique in construction machinery: Status, challenges and countermeasures. In: Automation in Construction, v. 95 (November 2018).
- (2018): Application of DICM on Similar Material Simulation Experiment for Rock-Like Materials. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Mechanism Study on the Axial Compressive Performance of Short Square CFST Columns with Different Stiffeners. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
