Feng Xing
- (2024): Efflorescence and mitigation of red mud–fly ash–phosphogypsum multicomponent geopolymer. In: Construction and Building Materials, v. 448 (October 2024).
- (2024): Effects of carbonation modification on shear performance of recycled aggregate concrete beams: Test and mechanism analysis. In: Engineering Structures, v. 315 (September 2024).
- (2024): Effect of nano-SiO2 modification on the seismic performance of recycled aggregate concrete shear walls. In: Engineering Structures, v. 307 (May 2024).
- (2023): Effect of particle size distribution on the pre-hydration, hydration kinetics, and mechanical properties of calcium sulfoaluminate cement. In: Construction and Building Materials, v. 398 (September 2023).
- (2024): Effects of Calcium Sulfate on Performances of CSA Clinker-Premixed Cl− System: Chloride Binding Analysis. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (January 2024).
- (2023): Effects of premixed Cl− on performance of calcium sulphoaluminate cement: mechanism of anti-chloride penetration. In: Materials and Structures, v. 56, n. 7 (10 August 2023).
- (2022): Effects of different supplementary cementitious materials on the performance and environment of eco-friendly mortar prepared from waste incineration bottom ash. In: Construction and Building Materials, v. 356 (November 2022).
- (2021): Electrochemical and microstructural evaluation of acidification damage induced by impressed current cathodic protection after incorporating a hydroxy activated-Mg/Al-double oxide in the external anode mortar. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete. In: Construction and Building Materials, v. 321 (February 2022).
- (2021): Effects of natural seawater mixing on the properties of alkali-activated slag binders. In: Construction and Building Materials, v. 294 (August 2021).
- (2021): Effect of polycarboxylate superplasticisers on the fresh properties of cementitious materials mixed with seawater. In: Construction and Building Materials, v. 289 (June 2021).
- (2021): Effects of polycarboxylate superplasticiser on hydration characteristics and hardened properties of cement blended with seawater. In: Construction and Building Materials, v. 304 (October 2021).
- (2021): Effects of Seawater, NaCl, and Na2SO4 Solution Mixing on Hydration Process of Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (May 2021).
- (2018): Effect of mechanical fastening pressure on the bond behaviors of hybrid-bonded FRP to concrete interface. In: Composite Structures, v. 204 (November 2018).
- (2018): Effect of engineered cementitious composite on the bond behavior between fiber-reinforced polymer and concrete. In: Composite Structures, v. 184 (January 2018).
- (2020): Effect of recycled aggregate treatment techniques on the durability of concrete: A comparative evaluation. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Effect of Lamellar Inorganic Fillers on the Properties of Epoxy Emulsion Cement Mortar. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 January 2020).
- (2018): Effect of carbon fibers grafted with carbon nanotubes on mechanical properties of cement-based composites. In: Construction and Building Materials, v. 181 (August 2018).
- (2018): Electrochemical feature for chloride ion transportation in fly ash blended cementitious materials. In: Construction and Building Materials, v. 161 (February 2018).
- (2019): Effects of initial defects within mortar cover on corrosion of steel and cracking of cover using X-ray computed tomography. In: Construction and Building Materials, v. 223 (October 2019).
- (2019): Effects of external confinement on steel reinforcement corrosion products monitored by X-ray microcomputer tomography. In: Construction and Building Materials, v. 222 (October 2019).
- (2019): An effective transport model of sulfate attack in concrete. In: Construction and Building Materials, v. 216 (August 2019).
- (2014): Electrochemical impedance measurement and modeling analysis of the carbonation behavior for cementititous materials. In: Construction and Building Materials, v. 54 (March 2014).
- (2014): Electrochemical impedance study on steel corrosion in the simulated concrete system with a novel self-healing microcapsule. In: Construction and Building Materials, v. 56 (April 2014).
- (2015): Effect of rice husk ash fineness on porosity and hydration reaction of blended cement paste. In: Construction and Building Materials, v. 89 (August 2015).
- (2015): Electrochemical impedance interpretation of the carbonation behavior for fly ash–slag–cement materials. In: Construction and Building Materials, v. 93 (September 2015).
- (2015): Effects of stirrup corrosion on bond–slip performance of reinforcing steel in concrete: An experimental study. In: Construction and Building Materials, v. 93 (September 2015).
- (2016): Electrochemical impedance interpretation for the fracture toughness of carbon nanotube/cement composites. In: Construction and Building Materials, v. 114 (July 2016).
- (2016): Effect of sulfate attack on the stress–strain relationship of FRP-confined concrete. In: Construction and Building Materials, v. 110 (May 2016).
- (2017): Effect of surface modification of colloidal particles in polymer latexes on cement hydration. In: Construction and Building Materials, v. 155 (November 2017).
Structurae cooperates with
