Feng Xing
- (2024): Impacts of nano C-S-H-PCE on durability-related properties of Portland cement composites with high-volume GGBFS. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Influence of municipal solid waste incineration bottom ash particle size on the evolution mechanism and distribution characteristics of multiscale pore structures in cement paste. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): Influence of municipal solid waste incineration bottom ash particle size on cement hydration and performance. In: Construction and Building Materials, v. 432 (June 2024).
- (2023): In-situ expansion compensation and repetitive self-healing of concrete using difunctional artificial aggregates. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Impact of sulfoaluminate cement modification on corrosion resistance of reactive powder concrete subjected to ammonium sulfate-rich sewer environment. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete. In: Construction and Building Materials, v. 392 (August 2023).
- (2016): In-situ measurement of viscoelastic properties of fresh cement paste by a microrheology analyzer. In: Cement and Concrete Research, v. 79 (January 2016).
- (2022): Influence of initial defects on the degradation of steel reinforced mortar exposed to cyclic wetting and drying environment based on 3D scanning. In: Construction and Building Materials, v. 325 (March 2022).
- (2022): Guide for Strengthening of Concrete Structures. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 978-2-88394-157-1.
- (2022): Influence mechanisms of fly ash in magnesium ammonium phosphate cement. In: Construction and Building Materials, v. 314 (January 2022).
- (2020): Impermeability characteristics of cementitious materials with self-healing based on epoxy/urea-formaldehyde microcapsules using an immersion test. In: Construction and Building Materials, v. 259 (October 2020).
- (2021): Influence of strain rate on mechanical characteristic and pore structure of self-healing cementitious composites with epoxy/urea-formaldehyde microcapsules. In: Construction and Building Materials, v. 268 (January 2021).
- (2018): Flexural performance of FRP-plated RC beams using H-type end anchorage. In: Composite Structures, v. 206 (December 2018).
- (2020): Immobilization of hazardous ferronickel slag treated using ternary limestone calcined clay cement. In: Construction and Building Materials, v. 250 (July 2020).
- (2020): Influence of cyclic loading on the tensile fracture characteristics of ultra-high performance engineered cementitious composites. In: Construction and Building Materials, v. 240 (April 2020).
- (2018): The ICCP-SS technique for retrofitting reinforced concrete compressive members subjected to corrosion. In: Construction and Building Materials, v. 167 (April 2018).
- (2018): Influence of Non-uniform corrosion of steel bars on the seismic behavior of reinforced concrete columns. In: Construction and Building Materials, v. 167 (April 2018).
- (2019): Free vibration of two taut cables interconnected by a damper. In: Structural Control and Health Monitoring, v. 26, n. 10 (13 September 2019).
- (2019): Influence of Acceleration Approaches on the Corrosion Behavior of Embedded Steel in Mortar. In: Advances in Civil Engineering Materials, v. 8, n. 3 (March 2019).
- (2019): Identification of corrosion products and 3D distribution in reinforced concrete using X-ray micro computed tomography. In: Construction and Building Materials, v. 207 (May 2019).
- (2019): Influence of axial loads on CO2 and Cl− transport in concrete phases: Paste, mortar and ITZ. In: Construction and Building Materials, v. 204 (April 2019).
- (2019): Inhibited effect of graphene oxide on calcium leaching of cement pastes. In: Construction and Building Materials, v. 202 (March 2019).
- (2014): Free vibration of taut cable with a damper and a spring. In: Structural Control and Health Monitoring, v. 21, n. 6 (June 2014).
- (2015): Free vibrations of a two-cable network with near-support dampers and a cross-link. In: Structural Control and Health Monitoring, v. 22, n. 9 (September 2015).
- (2018): Free vibration of a taut cable with a damper and a concentrated mass. In: Structural Control and Health Monitoring, v. 25, n. 11 (November 2018).
- (2017): Investigating drying behavior of cement mortar through electrochemical impedance spectroscopy analysis. In: Construction and Building Materials, v. 135 (March 2017).
- (2017): Influence of slag incorporation on electrochemical behavior of carbonated cement. In: Construction and Building Materials, v. 147 (August 2017).
- (2016): In-situ crack propagation monitoring in mortar embedded with cement-based piezoelectric ceramic sensors. In: Construction and Building Materials, v. 126 (November 2016).
- (2019): Interpretation on the influence of chloride ion on early hydration evolution for cementitious materials by a non-contact monitoring method. In: Construction and Building Materials, v. 199 (February 2019).
- (2010): Fuzzy-multi-objective particle swarm optimization for time–cost–quality tradeoff in construction. In: Automation in Construction, v. 19, n. 8 (December 2010).
Structurae cooperates with
