Jianzhuang Xiao 
- (2024): Improving thermal conductivity and drying shrinkage of foamed concrete with artificial ceramsite from excavation soil and sewage sludge. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Intelligent real-time quality control for 3D-printed concrete with near-nozzle secondary mixing. In: Automation in Construction, v. 160 (April 2024).
- (2024): Improving the mechanical properties of cement-based materials under high temperature: Reducing the C3S/C2S ratio. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Interlayer bonding strength and pore characteristics of 3D printed engineered cementitious composites (ECC). In: Journal of Building Engineering, v. 84 (May 2024).
- (2024): Influence of recycled concrete powder and CO2 curing on the properties of thermal insulation mortars. In: Construction and Building Materials, v. 414 (February 2024).
- (2024): Investigation on alkali-activated insulation mortar containing high-volume recycled concrete powder for energy-efficient buildings. In: Energy and Buildings, v. 303 (January 2024).
- (2023): Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis. In: Engineering Structures, v. 283 (May 2023).
- (2023): Influence of fiber properties on abrasion resistance of recycled aggregate concrete: Length, volume fraction, and types of fibers. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Influence of recycled powder derived from waste concrete on mechanical and thermal properties of foam concrete. In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Identification and reconstruction of concrete mesostructure based on deep learning in artificial intelligence. In: Construction and Building Materials, v. 352 (October 2022).
- (2022): Fundamental behavior of recycled aggregate concrete - Overview II: Durability and enhancement. In: Magazine of Concrete Research, v. 74, n. 19 (October 2022).
- (2021): Fresh properties of 3D printed mortar with recycled powder. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Flexural properties of 3D printed fibre-reinforced concrete with recycled sand. In: Construction and Building Materials, v. 288 (June 2021).
- (2022): Geopolymers made of recycled brick and concrete powder – A critical review. In: Construction and Building Materials, v. 330 (May 2022).
- (2022): Fundamental behavior of recycled aggregate concrete - Overview I: Strength and deformation. In: Magazine of Concrete Research, v. 74, n. 19 (October 2022).
- (2022): Globally continuous hybrid path for extrusion-based additive manufacturing. In: Automation in Construction, v. 137 (May 2022).
- (2021): Influence of new‐to‐old concrete interface on the damping behavior of recycled aggregate concrete. In: Structural Concrete, v. 22, n. 5 (September 2021).
- (2021): Hysteretic energy and damping variation of recycled aggregate concrete with different cyclic compression loading levels. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Frequency-Dependent Damping Properties of Recycled Aggregate Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 7 (July 2021).
- (2020): Influence of recycled powder on chloride penetration resistance of green reactive powder concrete. In: Construction and Building Materials, v. 251 (August 2020).
- (2018): Feasibility study of strain hardening magnesium oxychloride cement-based composites. In: Construction and Building Materials, v. 165 (March 2018).
- (2012): FEM simulation of chloride diffusion in modeled recycled aggregate concrete. In: Construction and Building Materials, v. 29 (April 2012).
- (2012): Interfacial transition zones in recycled aggregate concrete with different mixing approaches. In: Construction and Building Materials, v. 35 (October 2012).
- (2013): Fatigue behavior of recycled aggregate concrete under compression and bending cyclic loadings. In: Construction and Building Materials, v. 38 (January 2013).
- (2014): GFRP-tube confined RAC under axial and eccentric loading with and without expansive agent. In: Construction and Building Materials, v. 73 (December 2014).
- (2016): Interfacial properties of modeled recycled aggregate concrete modified by carbonation. In: Construction and Building Materials, v. 105 (February 2016).
- (2016): Hydration process modeling of ITZ between new and old cement paste. In: Construction and Building Materials, v. 109 (April 2016).
- (2013): Five-phase composite sphere model for chloride diffusivity prediction of recycled aggregate concrete. In: Magazine of Concrete Research, v. 65, n. 9 (May 2013).
- (2018): Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar. In: Engineering Structures, v. 170 (September 2018).
- (2015): Flexural behaviour of recycled aggregate concrete graded slabs. In: Structural Concrete, v. 16, n. 2 (June 2015).
Structurae cooperates with
