Jianzhuang Xiao 
- (2024): Experimental and simulation studies on the waterproofing performance of anchored sealing gasket for shield tunnel lining. In: Tunnelling and Underground Space Technology, v. 152 (October 2024).
- (2024): Experimental and numerical study on the flexural behavior of 3D-printed composite beams with U-shaped ECC formwork. In: Engineering Structures, v. 312 (August 2024).
- (2023): Evaluation of cracking and deflection of GFRP bar reinforced recycled concrete beams with seawater and sea sand. In: Journal of Building Engineering, v. 80 (December 2023).
- (2011): Experimental study on the failure mechanism of recycled concrete. In: Cement and Concrete Research, v. 41, n. 10 (October 2011).
- (2013): Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete. In: Cement and Concrete Research, v. 52 (October 2013).
- (2022): Experimental study and assessment of thermal energy storage mortar with paraffin/recycled brick powder composite phase change materials. In: Frontiers of Structural and Civil Engineering, v. 16, n. 10 (November 2022).
- (2022): Experimental study on the bond behaviour between steel bars and 3D printed concrete. In: Journal of Building Engineering, v. 49 (May 2022).
- (2022): Effects of printing paths and recycled fines on drying shrinkage of 3D printed mortar. In: Construction and Building Materials, v. 342 (August 2022).
- (2021): Experimental and analytical studies of the dynamic behavior of particle dampers prepared with waste cement‐based materials. In: Structural Concrete, v. 23, n. 6 (December 2021).
- (2022): Experimental study on carbonation behavior of seawater sea sand recycled aggregate concrete. In: Advances in Structural Engineering, v. 25, n. 5 (February 2022).
- (2021): Experimental study of the shear behaviour of concrete-grout-concrete joints. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Experimental study on the thermal performance of a 3D printed concrete prototype building. In: Energy and Buildings, v. 241 (June 2021).
- (2018): Energy implications of using steel-timber composite (STC) elements in buildings. In: Energy and Buildings, v. 176 (October 2018).
- (2020): Experimental study on stress-strain curves of seawater sea-sand concrete under uniaxial compression with different strain rates. In: Advances in Structural Engineering, v. 24, n. 6 (December 2020).
- (2020): Experimental study on mechanical behavior of thermally damaged grouted sleeve splice under cyclic loading. In: Structural Concrete, v. 21, n. 6 (December 2020).
- (2020): Experimental study on crumb rubberised concrete (CRC) and reinforced CRC slabs under static and impact loads. In: Australian Journal of Structural Engineering, v. 21, n. 4 (October 2020).
- (2020): Experimental Study of the Seismic Performance of Concrete Beam-Column Frame Joints with DfD Connections. In: Journal of Structural Engineering (ASCE), v. 146, n. 4 (April 2020).
- (2017): Estimation and Minimization of Embodied Carbon of Buildings: A Review. In: Buildings, v. 7, n. 4 (January 2017).
- (2011): Experimental study on the seismic response of braced reinforced concrete frame with irregular columns. In: Earthquake Engineering and Engineering Vibration, v. 10, n. 4 (December 2011).
- (2013): Experimental study on the seismic performance of new sandwich masonry walls. In: Earthquake Engineering and Engineering Vibration, v. 12, n. 1 (March 2013).
- (2014): Empirical Models for Modulus of Elasticity of HSC Considering the Effect of In Situ Curing Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 8 (August 2014).
- (2015): Effects of strain rate on mechanical behavior of modeled recycled aggregate concrete under uniaxial compression. In: Construction and Building Materials, v. 93 (September 2015).
- (2016): Experimental study on mechanical behaviors of concrete with large-size recycled coarse aggregate. In: Construction and Building Materials, v. 120 (September 2016).
- (2006): Experimental Investigation on the Limitation of Axial Load Level of RC Columns in Seismic Regions. In: Advances in Structural Engineering, v. 9, n. 3 (June 2006).
- (2017): Experimental study on behavior of mortar-aggregate interface after elevated temperatures. In: Frontiers of Structural and Civil Engineering, v. 11, n. 2 (April 2017).
- (2013): Experimental study on the compressive performance of new sandwich masonry walls. In: Frontiers of Structural and Civil Engineering, v. 7, n. 2 (May 2013).
- (2008): Experimental research on seismic behavior of recycled concrete frame under varying cyclic loading. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 4 (October 2008).
- (2002): Experimental study on strength and ductility of carbonated concrete elements. In: Construction and Building Materials, v. 16, n. 3 (April 2002).
- (2004): Experimental study on bond behavior between FRP and concrete. In: Construction and Building Materials, v. 18, n. 10 (December 2004).
- (2018): Experimental and numerical studies on design for deconstruction concrete connections: An overview. In: Advances in Structural Engineering, v. 21, n. 14 (April 2018).
Structurae cooperates with
