Hao Wu 
- (2024): Mechanical behaviors and meso analysis of asphalt mixtures under moisture damage induced by hydrodynamic impacts. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Optimal seismic design for self-centering concrete wall structures equipped with U-shaped flexural plate dissipaters. In: Structures, v. 63 (May 2024).
- (2024): Multi-scale analysis on fracture behaviors of asphalt mixture considering moisture damage. In: Construction and Building Materials, v. 416 (February 2024).
- (2024): Mechanical and rheological properties of polyurethane-polyurea (PU-PUa) modified asphalt binder. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Micromachined piezoelectric sensor with radial polarization for enhancing underwater acoustic measurement. In: Composite Structures, v. 329 (February 2024).
- (2023): Numerical investigation on the characteristics of dynamic response and damage of a RC tall chimney considering vertical ground motions. In: Soil Dynamics and Earthquake Engineering, v. 175 (December 2023).
- (2023): An open-source and experimentally guided CFD strategy for predicting air distribution in data centers with air-cooling. In: Building and Environment, v. 242 (August 2023).
- (2023): Lateral bearing behavior and yield mechanism of Column-Flexible footing substructures considering SSI. In: Structures, v. 54 (August 2023).
- (2023): Mechanical properties of re-entrant chiral anisotropic honeycomb. In: Engineering Structures, v. 291 (September 2023).
- (2023): A novel dynamic constitutive model for UHPC under projectile impact. In: Engineering Structures, v. 280 (April 2023).
- (2022): A multi-objective design method for seismic retrofitting of existing reinforced concrete frames using pin-supported rocking walls. In: Frontiers of Structural and Civil Engineering, v. 16, n. 9 (September 2022).
- (2023): A Multifunctional Reinforced Concrete Tuned Liquid Wall Damper with Optimal Design Variables. In: Practice Periodical on Structural Design and Construction, v. 28, n. 1 (February 2023).
- (2022): Numerical Methods for Geometric Nonlinear Dynamic Analysis of Suspension Bridges Under Earthquake. In: Journal of Earthquake Engineering, v. 27, n. 6 (May 2022).
- (2022): Orthogonal analysis and mechanism of compressive strength and microstructure of the metakaolin-fly ash geopolymer. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2021): Multi-phase flow simulation of landslide dam formation process based on extended coupled DEM-CFD method. In: Computers and Geotechnics, v. 140 (December 2021).
- (2022): Large deformation characteristics and treatment effect for deep bias tunnel in broken phyllite: a case study. In: Engineering Failure Analysis, v. 135 (May 2022).
- (2022): Investigations on train‐induced vibration and vibration control of an over‐track building using thick‐layer rubber bearings. In: The Structural Design of Tall and Special Buildings, v. 31, n. 1 (January 2022).
- (2017): On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (June 2017).
- (2016): A multiaxial incremental fatigue damage formulation using nested damage surfaces. In: Frattura ed Integrità Strutturale, v. 10, n. 37 (June 2016).
- (2020): Optimum design for unbonded posttensioned precast concrete frames with damping. In: The Structural Design of Tall and Special Buildings, v. 29, n. 14 (10 October 2020).
- (2018): Low velocity impact resistance of bio-inspired building ceramic composites with nacre-like structure. In: Construction and Building Materials, v. 169 (April 2018).
- (2019): Numerical simulation of spudcan-soil interaction using an improved smoothed particle hydrodynamics (SPH) method. In: Marine Structures, v. 66 (July 2019).
- (2019): Optimum design for unbonded posttensioned precast split shear wall system using genetic algorithm. In: The Structural Design of Tall and Special Buildings, v. 28, n. 5 (10 April 2019).
- (2011): Laboratory Evaluation of Abrasion Resistance of Portland Cement Pervious Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 5 (May 2011).
- (2010): Laboratory evaluation of permeability and strength of polymer-modified pervious concrete. In: Construction and Building Materials, v. 24, n. 5 (May 2010).
- (2011): Performance comparison of laboratory and field produced pervious concrete mixtures. In: Construction and Building Materials, v. 25, n. 8 (August 2011).
- (2014): Numerical Study of the Wake Separation and Reattachment Effect on the Trajectory of a Hard Projectile. In: International Journal of Protective Structures, v. 5, n. 1 (March 2014).
- (2018): note on the impact resistance of concrete target against rigid projectile. In: International Journal of Protective Structures, v. 9, n. 3 (April 2018).
- (2017): Parameters of Holmquist–Johnson–Cook model for high-strength concrete-like materials under projectile impact. In: International Journal of Protective Structures, v. 8, n. 3 (September 2017).
- (2017): Numerical simulations of shaped charge jet penetration into concrete-like targets. In: International Journal of Protective Structures, v. 8, n. 2 (June 2017).
Structurae cooperates with
