Hao Wu 
- (2024): Development and Characterization of Alkali-Activated Lithium Slag-Fly Ash Composite Cement. In: Buildings, v. 14, n. 12 (18 December 2024).
- (2025): Bending behavior and microstructure of lightweight engineered geopolymer composites reinforced by MWCNTs and steel-PVA hybrid fibers. In: Journal of Building Engineering, v. 99 (April 2025).
- (2024): Analysis of damage characteristics of the rectangular steel container under near-earth explosion loading. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Difference Analysis and Correlation Transformation of the Load-Resisting Capacities of Frame Assemblies with Various Scales. In: Journal of Structural Engineering (ASCE), v. 150, n. 8 (August 2024).
- (2024): Analysis of tunneling-induced ground movements in spatially variable soil under the influence of existing building. In: Computers and Geotechnics, v. 166 (February 2024).
- (2024): A composite prismatic structure with thermal-torsion coupling effect. In: Engineering Structures, v. 304 (April 2024).
- (2023): Analysis of Fouling Pattern of Tunnel Drainage Pipe in Karst Areas. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Behavior of reinforced concrete walls with integrated tubing system. In: Structural Concrete, v. 24, n. 5 (October 2023).
- (2023): Assessment on concrete constitutive models for numerical simulations of vehicular collisions with RC bridge piers. In: Structures, v. 53 (July 2023).
- (2023): Damage characteristics of hybrid fiber reinforced concrete under the freeze-thaw cycles and compound-salt attack. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Determining meso-parameters of hot mix asphalt with reclaimed asphalt pavement based on workability. In: Construction and Building Materials, v. 359 (December 2022).
- (2017): Building damage concentrated in Longtoushan town during the 2014 Ms. 6.5 Ludian earthquake, Yunnan, China: examination of cause and implications based on ground motion and vulnerability analyses. In: Journal of Seismology, v. 21, n. 5 (2 April 2017).
- (2022): Centrifuge Model Test on Anti-dip Rock Slopes with Unequal Thicknesses Subjected to Flexural Toppling Failure. In: KSCE Journal of Civil Engineering, v. 26, n. 6 (April 2022).
- (2022): Bending Performance of Precast Lightweight Aggregate Concrete Exterior Wallboard with a Concealed Rib Sandwich Structure. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Coupling Effect Between Highly Nonlinear Solitary Waves and Composite Plate with Matrix Cracking. In: Composite Structures, v. 292 (July 2022).
- (2022): Damage Assessment of Simply Supported Double-Pier Bent Bridge under Heavy Truck Collision. In: Journal of Bridge Engineering (ASCE), v. 27, n. 5 (May 2022).
- (2021): Characterizing the fatigue cracking behaviors of OGFC pavements using the overlay tester. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Design and experimental study of a blended cement containing high-volume solid waste activated ultrafine powder. In: Construction and Building Materials, v. 303 (October 2021).
- (2019): Bearing behavior of reinforced concrete column-isolated footing substructures. In: Engineering Structures, v. 200 (December 2019).
- (2021): Analysis of Stress and Deformation Characteristics of Deep-Buried Phyllite Tunnel Structure under Different Cross-Section Forms and Initial Support Parameters. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2016): Application of the Moment Of Inertia method to the Critical-Plane Approach. In: Frattura ed Integrità Strutturale, v. 10, n. 38 (October 2016).
- (2020): Accurate prediction of shear buckling capacity of low-yield-strength steel considering plastic deformations. In: Journal of Constructional Steel Research, v. 172 (September 2020).
- (2020): Deep research about the mechanisms of graphene oxide (GO) aggregation in alkaline cement pore solution. In: Construction and Building Materials, v. 247 (June 2020).
- (2020): A critical state-of-the-art review of durability and functionality of open-graded friction course mixtures. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): Collapse fragility analysis of self-centering precast concrete walls with different post-tensioning and energy dissipation designs. In: Bulletin of Earthquake Engineering, v. 17, n. 6 (April 2019).
- (2019): Design methodology and mechanical properties of Superabsorbent Polymer (SAP) cement-based materials. In: Construction and Building Materials, v. 204 (April 2019).
- (2014): Characterizing Fatigue Behavior of Asphalt Mixtures Utilizing Loaded Wheel Tester. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 1 (January 2014).
- (2015): Developing a polymer-based crack repairing material using interpenetrate polymer network (IPN) technology. In: Construction and Building Materials, v. 84 (June 2015).
- (2017): Blast responses of CFRP strengthened autoclaved aerated cellular concrete panels. In: Construction and Building Materials, v. 157 (December 2017).
- (2017): comparison of strain-rate enhancement approaches for concrete material subjected to high strain-rate. In: International Journal of Protective Structures, v. 8, n. 2 (June 2017).
Structurae cooperates with
