Zhiqiang Wang 
- (2024): Comparative assessment of the interlayer shear strength of asphalt concrete with carbon fiber geogrid as reinforcement. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Centrifugal Model Test of Multi-Level Slope under Combined Support of Pile-Anchor and Frame-Anchor. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Experimental and numerical investigation on seismic performance of novel cable-restraining composite rubber bearings for highway bridges. In: Engineering Structures, v. 317 (October 2024).
- (2024): Embedment behaviour of hybrid cross-laminated timber (HCLT) made of fast-growing Chinese fir and OSB. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): The Effect of Excavation Disturbance on the Stability of Bedding Cataclastic Rock Mass High Slope Containing Multimuddy Interlayers. In: Advances in Civil Engineering, v. 2024 (January 2024).
- (2024): Experimental and Numerical Study of Grout Effectiveness and Force-Transfer Mechanism in Socket Connections. In: Journal of Bridge Engineering (ASCE), v. 29, n. 4 (April 2024).
- (2024): Experimental and numerical study on timber-to-bamboo scrimber connection with self-tapping screws. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Dynamic response analysis of vertical hybrid structure-equipment system of petrochemical production plant. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Dynamic response analysis of liquefiable ground due to sinusoidal waves of different frequencies of shield construction. In: Earthquake Engineering and Engineering Vibration, v. 22, n. 3 (May 2023).
- (2023): Efficiency of an Improved Grouted Corrugated Duct (GCD) Connection Design for Precast Concrete Bridge Pier: Numerical and Parametric Study. In: Buildings, v. 13, n. 1 (13 January 2023).
- (2022): Cost-based optimum design of the earthquake-resistant system for continuous skew overpasses. In: Structures, v. 45 (November 2022).
- (2022): The Dimensional Stability and Bonding Performance of Hybrid CLT Fabricated with Lumber and COSB. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2023): Bonding performance of cross-laminated timber-bamboo composites. In: Journal of Building Engineering, v. 63 (January 2023).
- (2022): Experimental and Numerical Study on the Seismic Performance of Precast Bridge Column with an Improved Grouted Corrugated Duct Connection Design. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2022): Development Characteristics of Composite Corrugation Irregularities on Tangential Track in Metro. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 46, n. 2 (February 2022).
- (2021): Experimental and Numerical Assessment of Precast Bridge Columns with Different Grouted Splice Sleeve Coupler Designs Based on Shake Table Test. In: Journal of Bridge Engineering (ASCE), v. 26, n. 8 (August 2021).
- (2021): Comparison of experimental approaches for seismic performance evaluation of bridge piers with high strength self-consolidating concrete towards practical engineering application. In: Engineering Structures, v. 243 (September 2021).
- (2020): Dynamic variation of surface temperatures on the radiant ceiling cooling panel based on the different supply water temperature adjustments. In: Sustainable Cities and Society, v. 52 (January 2020).
- (2020): The dynamic effect of supply water flow regulation on surface temperature changes of radiant ceiling panel for cooling operation. In: Sustainable Cities and Society, v. 52 (January 2020).
- (2020): Dynamic variation in dew-point temperature of attached air layer of radiant ceiling cooling panels. In: Building Simulation, v. 13, n. 6 (August 2020).
- (2020): Climatic division based on frosting characteristics of air source heat pumps. In: Energy and Buildings, v. 224 (October 2020).
- (2014): Design optimization and field demonstration of natural ventilation for high-rise residential buildings. In: Energy and Buildings, v. 82 (October 2014).
- (2019): Durability method on corrosion fatigue performance of AH 32 steel. In: Frattura ed Integrità Strutturale, v. 13, n. 48 (March 2019).
- (2013): Catalytic oxidization of indoor formaldehyde at room temperature – Effect of operation conditions. In: Building and Environment, v. 65 (July 2013).
- (2011): Characterization and performance evaluation of a full-scale activated carbon-based dynamic botanical air filtration system for improving indoor air quality. In: Building and Environment, v. 46, n. 3 (March 2011).
- (2020): Embedment strength of smooth dowel-type fasteners in cross-laminated timber. In: Construction and Building Materials, v. 233 (February 2020).
- (2009): A comparative study of bridge damage due to the Wenchuan, Northridge, Loma Prieta and San Fernando earthquakes. In: Earthquake Engineering and Engineering Vibration, v. 8, n. 2 (June 2009).
- (2016): Experimental investigation of size effect on mechanical properties of carbon fiber reinforced polymer (CFRP) confined concrete circular specimens. In: Construction and Building Materials, v. 127 (November 2016).
Structurae cooperates with
