Ying Wang 
- (2024): Hysteretic behavior of steel tubular web-concrete filled chord T-joints with spherical-cap gap under cyclic bending. In: Structures, v. 65 (July 2024).
- (2024): GA-BP based daylight prediction and sensor placement in residential areas. In: Science and Technology for the Built Environment, v. 30, n. 5 (April 2024).
- (2023): Flexural behavior of high-strength square concrete-filled steel tube members subjected to cyclic loadings. In: Structures, v. 58 (December 2023).
- (2023): Experimental study on high-temperature resistance of alkali-activated slag concrete block masonry. In: Advances in Structural Engineering, v. 27, n. 1 (9 November 2023).
- : The impact of autonomy on sustainable performance in foreign subsidiaries: an empirical study from Chinese construction industry. In: Engineering, Construction and Architectural Management.
- (2023): General Prediction Models for Local Bearing Capacity of Concrete. In: KSCE Journal of Civil Engineering, v. 27, n. 11 (22 September 2023).
- (2023): Extending fly ash and pumice usage through blending with inert basaltic fines. In: Materials and Structures, v. 56, n. 7 (10 August 2023).
- (2023): Identification of chloride diffusion coefficient in concrete using physics-informed neural networks. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Flexural Behavior of Prefabricated RC Bridge Deck with Different Joint Materials. In: Buildings, v. 13, n. 6 (23 May 2023).
- (2023): High-strength rectangular concrete-filled steel tube long columns: Parametric studies and design. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Flexural behavior and design of rectangular ultra-high performance concrete-filled high-strength steel tube members. In: Engineering Structures, v. 286 (July 2023).
- (2023): Green demolition technology of reinforced concrete slab: Application of soundless chemical demolition agents and its evaluation system. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- (2022): Green and recyclable demolition of steel reinforced concrete: Application and calculation model of induction heating demolition technology. In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Flexural behavior of layered CTRC-ECC reinforced cementitious composite plates. In: Journal of Building Engineering, v. 62 (December 2022).
- (2023): Hole layout calculation method of reinforced concrete beam demolition with soundless chemical demolition agents: Experimental investigation. In: Engineering Structures, v. 274 (January 2023).
- (2022): Fatigue damage evaluation of steel bridges considering thermal effect. In: Structure and Infrastructure Engineering, v. 18, n. 7 (April 2022).
- (2022): Experimental study on the tensile behavior of ultra‐high performance concrete fiber continuous joints. In: Structural Concrete, v. 23, n. 1 (January 2022).
- (2022): Flexural Behavior of High-Strength Rectangular Concrete-Filled Steel Tube Members. In: Journal of Structural Engineering (ASCE), v. 148, n. 1 (January 2022).
- (2021): Experimental Study on Magnesium Sulfate Cement Concrete Splices of Widened Box Girder. In: KSCE Journal of Civil Engineering, v. 25, n. 12 (September 2021).
- (2009): Guided wave propagation and spectral element method for debonding damage assessment in RC structures. In: Journal of Sound and Vibration, v. 324, n. 3-5 (July 2009).
- (2016): Influence of axial loads on the health monitoring of concrete structures using embedded piezoelectric transducers. In: Structural Health Monitoring, v. 16, n. 2 (September 2016).
- (2021): Influence of asphalt microstructure to its high and low temperature performance based on atomic force microscope (AFM). In: Construction and Building Materials, v. 267 (January 2021).
- (2016): Finite element analysis of effect of inter-yarn friction on ballistic impact response of woven fabrics. In: Composite Structures, v. 135 (January 2016).
- (2020): Influence of high sustained loads and longitudinal reinforcement on long-term deformation of reinforced concrete beams. In: Journal of Building Engineering, v. 30 (July 2020).
- (2020): Field Testing of Wind Turbine Towers with Contact and Noncontact Vibration Measurement Methods. In: Journal of Performance of Constructed Facilities (ASCE), v. 34, n. 1 (February 2020).
- (2019): Experimental methods to determine the feasibility of steel slags as supplementary cementitious materials. In: Construction and Building Materials, v. 204 (April 2019).
- (2004): Genetic Algorithm-Simulation Methodology for Pavement Maintenance Scheduling. In: Computer-Aided Civil and Infrastructure Engineering, v. 19, n. 6 (November 2004).
- (2016): Experimental study of damage evolution in cuboid stirrup-confined concrete. In: Materials and Structures, v. 49, n. 7 (July 2016).
- (2013): FEM Calibrated ARMAX Model Updating Method for Time Domain Damage Identification. In: Advances in Structural Engineering, v. 16, n. 1 (January 2013).
- (2008): Fatigue stress monitoring and analyses for steel box girder of Runyang Suspension Bridge. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 3 (June 2008).
Structurae cooperates with
