Ying Wang 
- (2024): Behavior of UHPC filled high-strength square steel tubular stub columns under combined flexural and axial loads. In: Journal of Building Engineering, v. 95 (Oktober 2024).
- (2024): The axial tensile performance of DSCW-RC joints with lap-spliced bars. In: Structures, v. 62 (April 2024).
- (2023): Advancements in Optimal Sensor Placement for Enhanced Structural Health Monitoring: Current Insights and Future Prospects. In: Buildings, v. 13, n. 12 (22 November 2023).
- : Construction of intelligent multi-construction management platform for bridges based on BIM technology. In: Intelligent Buildings International.
- (2023): Axial compressive behavior and design of high-strength square concrete-filled steel tube short columns with embedded GFRP tubes. In: Journal of Constructional Steel Research, v. 207 (August 2023).
- (2023): Characterization and reactivity of size-fractionated unconventional fly ashes. In: Materials and Structures, v. 56, n. 3 (3 März 2023).
- (2022): Compressive behavior of lightweight concrete using aerogel-reinforced expanded polystyrene foams. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Building damage detection from satellite images after natural disasters on extremely imbalanced datasets. In: Automation in Construction, v. 140 (August 2022).
- (2022): Artificial neural network model for predicting the local compression capacity of stirrups-confined concrete. In: Structures, v. 41 (Juli 2022).
- (2022): Damage identification of single-layer cylindrical latticed shells based on the model updating technique. In: Journal of Civil Structural Health Monitoring, v. 12, n. 2 (23 Februar 2022).
- (2022): A baseline-free method for damage identification in pipes from local vibration mode pair frequencies. In: Structural Health Monitoring, v. 21, n. 5 (März 2022).
- (2021): Correlating dynamic climate conditions and socioeconomic-governmental factors to spatiotemporal spread of COVID-19 via semantic segmentation deep learning analysis. In: Sustainable Cities and Society, v. 75 (Dezember 2021).
- (2021): Condition identification of bolted connections using a virtual viscous damper. In: Structural Health Monitoring, v. 21, n. 2 (Mai 2021).
- (2016): A Case Study on Optimization of Urban Design Base on Wind Environment Simulation. In: Journal of Civil Engineering and Architecture, v. 10, n. 8 (August 2016).
- (2017): Absolute stress measurement of structural steel members with ultrasonic shear-wave spectral analysis method. In: Structural Health Monitoring, v. 18, n. 1 (Dezember 2017).
- (2021): Bond behavior of square CFT using manufactured sand and recycled coarse aggregate. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2016): Analysis of passive thermal storage opportunities for heating system design. In: Science and Technology for the Built Environment, v. 22, n. 3 (Februar 2016).
- (2019): Analytical Elasto-plastic Solution for Frost Force of Cold-Region Tunnels considering Anisotropic Frost Heave in the Surrounding Rock. In: KSCE Journal of Civil Engineering, v. 23, n. 9 (August 2019).
- (2019): Analysis of Fatigue Crack Propagation of an Orthotropic Bridge Deck Based on the Extended Finite Element Method. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Comparison of the Lcr wave TOF and shear‐wave spectrum methods for the uniaxial absolute stress evaluation of steel members. In: Structural Control and Health Monitoring, v. 26, n. 6 (Mai 2019).
- (2019): Bond properties of alkali-activated slag concrete hollow block masonry with different mortar strength grades. In: Construction and Building Materials, v. 216 (August 2019).
- (2019): Creep model of high-strength concrete containing supplementary cementitious materials. In: Construction and Building Materials, v. 202 (März 2019).
- (2015): Damage Identification Scheme Based on Compressive Sensing. In: Journal of Computing in Civil Engineering, v. 29, n. 2 (März 2015).
- (2018): Analog modeling of sand slope stability with different precipitation conditions. In: Journal of Modern Transportation, v. 26, n. 3 (Juli 2018).
- (2012): Compressive stress–strain relationship of steel fiber-reinforced reactive powder concrete after exposure to elevated temperatures. In: Construction and Building Materials, v. 35 (Oktober 2012).
- (2013): Compressive and tensile properties of reactive powder concrete with steel fibres at elevated temperatures. In: Construction and Building Materials, v. 41 (April 2013).
- (2014): Characterization of the effect of foaming water content on the performance of foamed crumb rubber modified asphalt. In: Construction and Building Materials, v. 67 (September 2014).
- (2012): Damage Identification of Steel Beams Using Local and Global Methods. In: Advances in Structural Engineering, v. 15, n. 5 (Mai 2012).
- (2013): Concurrent multi-scale modelling and updating of long-span bridges using a multi-objective optimisation technique. In: Structure and Infrastructure Engineering, v. 9, n. 12 (Dezember 2013).
- (2013): Damage identification of slab–girder structures: experimental studies. In: Journal of Civil Structural Health Monitoring, v. 3, n. 2 (Mai 2013).
Structurae kooperiert mit
