Qiang Wang 
- : High-resolution frequency domain decomposition for modal analysis of bridges using train-induced free-vibrations. In: Advances in Structural Engineering.
- (2011): An explanation for the negative effect of elevated temperature at early ages on the late-age strength of concrete. In: Journal of Materials Science, v. 46, n. 22 (November 2011).
- (2023): ICA-LightGBM Algorithm for Predicting Compressive Strength of Geo-Polymer Concrete. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2023): An experimental study on the evolution of flame length and tilt angle under the joint effect of tunnel curved ceiling restriction and longitudinal ventilation. In: Tunnelling and Underground Space Technology, v. 141 (November 2023).
- (2023): Experimental and numerical study of measuring in-situ stress in horizontal borehole by hydraulic fracturing method. In: Tunnelling and Underground Space Technology, v. 141 (November 2023).
- (2023): Experimental and Numerical Study on Axial Compression Cold-Formed Steel Composite Wall under Concentrated Loads. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Flexural Behavior of Cold-Formed Steel Composite Floor Infilled with Desert Sand Foamed Concrete. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Experimental Study on Cemented Tailings Backfill Based on Microbially Induced Calcite Precipitation. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 3 (March 2023).
- (2022): Influence of height ratio in groups of buildings of unequal height on micrositing of urban-SWTs. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 231 (December 2022).
- (2022): Influence of carlin-type gold mine tailings addition on the synthesis temperature, alkali-resistant performance, and hydration mechanism of Portland cement. In: Construction and Building Materials, v. 359 (December 2022).
- (2022): Experimental Study on Seismic Compression of Chinese Loess under Cyclic Direct Simple Shear Testing. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Fatigue performance of CFRP reinforced pretensioned prestressed beams. In: Construction and Building Materials, v. 324 (March 2022).
- (2022): Identification of the bond between ribbed CFRP bars and novel ARs anchorage. In: Construction and Building Materials, v. 327 (April 2022).
- (2018): Experimental Study on Temperature Distribution of Ceiling Jet in Tunnel Fires under Natural Ventilation. In: Procedia Engineering, v. 211 ( 2018).
- (2022): The impact of energy efficiency on carbon emissions: Evidence from the transportation sector in Chinese 30 provinces. In: Sustainable Cities and Society, v. 82 (July 2022).
- (2022): Friction mechanism and experimental investigation of the response‐amplified friction damper. In: Structural Control and Health Monitoring, v. 29, n. 7 (March 2022).
- (2022): Exploratory study on the short- and long-term bond between ribbed CFRP bars and additional aluminum alloy ribs anchorage. In: Construction and Building Materials, v. 325 (March 2022).
- (2021): Improvement on the high-temperature performance and fuel resistance of SBS modified asphalt by hybridizing with polyamide resin. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Experimental study on seismic performance of square RC columns strengthened with multi-layer prestressed CFRP fabric. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Experimental study on the characteristics of fire smoke longitudinal crossflow in adjacent tunnels. In: Tunnelling and Underground Space Technology, v. 114 (August 2021).
- (2015): Examining the Stationarity and Ergodicity of Traffic Flow on Highway Bridges. In: Journal of Highway and Transportation Research and Development (English Edition), v. 9, n. 4 (December 2015).
- (2020): Improvement of bond performance between concrete and CFRP bars with optimized additional aluminum ribs anchorage. In: Construction and Building Materials, v. 241 (April 2020).
- (2019): Experimental and numerical investigation of steel-concrete (SC) slabs under contact blast loading. In: Engineering Structures, v. 196 (October 2019).
- (2010): Hydration properties of basic oxygen furnace steel slag. In: Construction and Building Materials, v. 24, n. 7 (July 2010).
- (2013): Influence of steel slag on mechanical properties and durability of concrete. In: Construction and Building Materials, v. 47 (October 2013).
- (2017): Influence of the initial moist curing time on the sulfate attack resistance of concretes with different binders. In: Construction and Building Materials, v. 144 (July 2017).
- (2017): Hydration mechanisms of composite binders containing phosphorus slag at different temperatures. In: Construction and Building Materials, v. 147 (August 2017).
- (2013): Evaluation of fatigue cracks using nonlinearities of acousto-ultrasonic waves acquired by an active sensor network. In: Smart Materials and Structures, v. 22, n. 1 (January 2013).
- (2018): Identification of damage in composite structures using Gaussian mixture model-processed Lamb waves. In: Smart Materials and Structures, v. 27, n. 4 (April 2018).
- (2018): Experimental study on the enhancement of additional ribs to the bond performance of FRP bars in concrete. In: Construction and Building Materials, v. 185 (October 2018).
Structurae cooperates with
