Ping Wang 
- (2024): Mechanical property testing and damage assessment of the regenerated rock mass with very weakly bonded cement. In: Frontiers in Built Environment, v. 10 (February 2024).
- (2024): Image analysis as a geometry- and integrity-independent tool for predicting strength of cemented tailings backfill using slag-based binder. In: Construction and Building Materials, v. 444 (September 2024).
- (2024): Investigating the properties of sprayed insulating cementitious materials with corn cobs. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Intelligent Pixel-Level Rail Running Band Detection Based on Deep Learning. In: Journal of Infrastructure Systems, v. 30, n. 3 (September 2024).
- (2024): The lay-up configuration toughening of carbon fiber/silk/poly-butylene-succinate (PBS) hybrid composites with high mechanical resistance. In: Construction and Building Materials, v. 433 (June 2024).
- (2022): Modeling of fatigue failure mode in U‐rib to deck joints in orthotropic bridge structures. In: Fatigue & Fracture of Engineering Materials & Structures, v. 45, n. 9 (July 2022).
- (2015): Influence of Frequency-Dependent Dynamic Parameters of Rail Pads on Environmental Vibration Induced by Subways in a Tunnel. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2476, n. 1 (January 2015).
- (2024): Large Section of Soft Rock Gob-Side Entry Retaining Surrounding Rock Control. In: Advances in Civil Engineering, v. 2024 (January 2024).
- (2024): Investigation on One-Dimensional Nonlinear Thermal Consolidation of Saturated Clay under the Impeded Drainage Boundary. In: International Journal of Geomechanics, v. 24, n. 1 (January 2024).
- (2023): A Method for Extracting Contours of Building Facade Hollowing Defects Using Polarization Thermal Images Based on Improved Canny Algorithm. In: Buildings, v. 13, n. 10 (10 October 2023).
- (2023): Mechanical Behavior and Failure Mechanism of Rocks under Impact Loading: The Coupled Effects of Water Saturation and Rate Dependence. In: International Journal of Geomechanics, v. 23, n. 11 (November 2023).
- (2023): Identification of Multiple Defects from Rail Vibration Signals Based on Fast Kurtogram. In: Journal of Transportation Engineering, Part A: Systems, v. 149, n. 6 (June 2023).
- (2023): Low-construction-emissions Optimization for Railway Alignment Fine-grained Designs within Densely Populated Urban Areas. In: Construction and Building Materials, v. 366 (February 2023).
- (2023): Influence of facing conditions on the dynamic response of back-to-back MSE walls. In: Soil Dynamics and Earthquake Engineering, v. 164 (January 2023).
- (2022): Iterative Optimization Adjustment Method for Ballastless Track Irregularity of High-Speed Railway. In: Journal of Surveying Engineering (ASCE), v. 148, n. 4 (November 2022).
- (2022): Impacts of environmental constraint target on green innovation efficiency: Evidence from China. In: Sustainable Cities and Society, v. 83 (August 2022).
- (2021): A multifunctional electromagnetic device for vibration energy harvesting and rail corrugation sensing. In: Smart Materials and Structures, v. 30, n. 12 (November 2021).
- (2021): How can household dampness-related exposure and its related health outcomes be predicted?. In: Building and Environment, v. 206 (December 2021).
- (2020): Influence of humidity on the mechanical properties of polymer-modified cement-based repair materials. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Modelling, Simulation, and Experimental Verification of a Pendulum-flywheel Vibrational Energy Harvester. In: Smart Materials and Structures, v. 29, n. 11 (September 2020).
- (2020): Influences of EVA and methylcellulose on mechanical properties of Portland cement-calcium aluminate cement-gypsum ternary repair mortar. In: Construction and Building Materials, v. 241 (April 2020).
- (2020): Influence of a tamping operation on the vibrational characteristics and resistance-evolution law of a ballast bed. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Investigation of the capillary rise in cement-based materials by using electrical resistivity measurement. In: Construction and Building Materials, v. 173 (June 2018).
- (2015): Influence of atmospheric fine particulate matter (PM 2.5 ) pollution on indoor environment during winter in Beijing. In: Building and Environment, v. 87 (May 2015).
- (1992): Multivariable Analysis using Isoparametric Finite Elements. In: Journal of Engineering Mechanics (ASCE), v. 118, n. 8 (August 1992).
- (1998): Longshore Sediment Flux in Water Column and across Surf Zone. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 124, n. 3 (May 1998).
- (1999): Longshore Sediment Transport Rate Measured by Short-Term Impoundment. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 125, n. 3 (May 1999).
- (2016): Longitudinal force measurement in continuous welded rail with bi-directional FBG strain sensors. In: Smart Materials and Structures, v. 25, n. 1 (January 2016).
- (2009): Large-scale simulation modeling system for industrial construction. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 36, n. 9 (September 2009).
- (2018): Influences of ethylene-vinyl acetate and methylcellulose on the properties of calcium sulfoaluminate cement. In: Construction and Building Materials, v. 193 (December 2018).
Structurae cooperates with
