Li Wang 
- (2024): In-Plane crushing performance of bionic glass Sponge-Type honeycomb structures. In: Composite Structures, v. 341 (August 2024).
- (2024): High-speed railway seismic response prediction using CNN-LSTM hybrid neural network. In: Journal of Civil Structural Health Monitoring, v. 14, n. 5 (March 2024).
- (2024): Interface microstructures and mechanical properties of foamable precursor sandwiches and aluminum foam sandwiches. In: Composite Structures, v. 336 (May 2024).
- (2024): Machine learning-based prediction model for CO2-induced corrosion on oil well cement under high-pressure and high-temperature condition. In: Construction and Building Materials, v. 414 (February 2024).
- (2023): The fatigue mechanism of asphalt mixture with an interlayer under the combined effect of multiple factors. In: Construction and Building Materials, v. 384 (June 2023).
- (2023): Influence of concrete and unbonded ratio on RC beams. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Interfacial constitutive model of 3D printed fiber reinforced concrete composites and its experimental validation. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Investigation on the High- and Low-Temperature Performance of Organic Rectorite and Polyurethane Composite-Modified Asphalt Binder. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).
- (2023): An integrated method of topological optimization and path design for 3D concrete printing. In: Engineering Structures, v. 291 (September 2023).
- (2023): Laboratory Study and Molecular Dynamics Simulation of High- and Low-Temperature Properties of Polyurethane-Modified Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 8 (August 2023).
- (2021): Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails. In: Cement and Concrete Research, v. 148 (October 2021).
- (2023): Investigation of Air Change Rate in a Single Room Using Multiple Carbon Dioxide Breathing Models in China: Verification by Field Measurement. In: Buildings, v. 13, n. 2 (14 February 2023).
- (2023): Material property and constitutive model of C120 hybrid fiber ultra-high performance concrete at elevated temperatures. In: Structures, v. 50 (April 2023).
- (2022): Influence of carlin-type gold mine tailings addition on the synthesis temperature, alkali-resistant performance, and hydration mechanism of Portland cement. In: Construction and Building Materials, v. 359 (December 2022).
- (2022): Mechanical and microstructural properties of 3D-printed aluminate cement based composite exposed to elevated temperatures. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Flexible air curtain optimization for isolating tobacco odor in large-scale space. In: Energy and Buildings, v. 273 (October 2022).
- (2022): Laboratory Investigation of PPG-TDI Polyurethane–Modified Asphalt Binders and Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 9 (September 2022).
- (2021): Importance and potential of cellulosic materials and derivatives in extrusion-based 3D concrete printing (3DCP): Prospects and challenges. In: Construction and Building Materials, v. 291 (July 2021).
- (2022): In-plane compression of graded hierarchical honeycombs. In: Advances in Structural Engineering, v. 25, n. 7 (April 2022).
- (2022): A Framework for Assessing the Performance of Adaptively Reused Buildings from Users’ Perspective: A Case Study of School Building. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Influence of underlying surface change caused by urban renewal on land surface temperatures in Central Guangzhou. In: Building and Environment, v. 215 (May 2022).
- (2022): Investigation on the epoxy/polyurethane modified asphalt binder cured with bio-based curing agent: Properties and optimization. In: Construction and Building Materials, v. 320 (February 2022).
- (2019): High Efficiency of Ce-Modified MnOx/TiO2-ZrO2-Based Low-Temperature Selective Catalytic Reduction Denitration Catalysts. In: Journal of Environmental Engineering (ASCE), v. 145, n. 12 (December 2019).
- (2018): Influence of recycled coarse aggregate replacement percentage on fatigue performance of recycled aggregate concrete. In: Construction and Building Materials, v. 169 (April 2018).
- (2020): A fast friction-model-inspired sparse regularization approach for damage identification with modal data. In: Computers & Structures, v. 227 (January 2020).
- (2019): Measure for Reducing the Tensile Stress in Cement-Treated Soil Layer in Deep Excavation in Soft Clay. In: KSCE Journal of Civil Engineering, v. 23, n. 9 (August 2019).
- (2019): Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing. In: Construction and Building Materials, v. 202 (March 2019).
- (2016): Formalized knowledge representation for spatial conflict coordination of mechanical, electrical and plumbing (MEP) systems in new building projects. In: Automation in Construction, v. 64 (April 2016).
- (2007): Investigation of the structural form optimization methods of high-rise buildings. In: Frontiers of Architecture and Civil Engineering in China, v. 1, n. 2 (May 2007).
- (2015): Influence of Chinese and Western Culture on Modern Church Architecture in Yan'an Area. In: Journal of Building Construction and Planning Research, v. 3, n. 4 ( 2015).
Structurae cooperates with
