Li Wang 
- (2024): Deformation Characteristics and Noncoaxial Behavior of Fiber-Reinforced Soil under Pure Principal Stress Axis Rotation. In: International Journal of Geomechanics, v. 24, n. 8 (August 2024).
- (2024): Co-utilization of stone coal leaching slag and bauxite residue for the preparation of lightweight ceramsite. In: Construction and Building Materials, v. 431 (Juni 2024).
- : Assessment of the impacts of the life cycle of construction waste on human health: lessons from developing countries. In: Engineering, Construction and Architectural Management.
- (2023): Effect of coarse aggregate on printability and mechanical properties of 3D printed concrete. In: Construction and Building Materials, v. 405 (November 2023).
- (2023): Cyclic behavior of unbonded post-tensioned precast segmental concrete columns fabricated by 3D printed concrete permanent formwork. In: Engineering Structures, v. 292 (Oktober 2023).
- (2022): 3D-printable aerogel-incorporated concrete: Anisotropy influence on physical, mechanical, and thermal insulation properties. In: Construction and Building Materials, v. 323 (März 2022).
- (2022): Characterization of toughness enhancement of aligned steel fibers in cement-based composites based on DDM method and meso-scale simulation. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Continuous and adaptable printing path based on transfinite mapping for 3D concrete printing. In: Automation in Construction, v. 142 (Oktober 2022).
- (2022): Axial compressive behavior and load-bearing capacity of steel tubular-corrugated steel plate confined concrete composite columns. In: Structures, v. 44 (Oktober 2022).
- (2022): Analytical Computation of Sandy Slope Stability under the Groundwater Seepage and Earthquake Conditions. In: Advances in Civil Engineering, v. 2022 (Januar 2022).
- (2022): Calculation of Additional Internal Forces in Post-Tensioned Prestressed Concrete Frame Columns Based on Equivalent Lateral Stiffness. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2016): Characteristics of Jellyfish Community and their Relationships to Environmental Factors in the Yangtze Estuary and the Adjacent Areas after the Third Stage Impoundment of the Three Gorges Dam. In: Procedia Engineering, v. 154 ( 2016).
- (2022): Air curtain dust-collecting technology: An experimental study on the performance of a large-scale dust-collecting system. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 220 (Januar 2022).
- (2021): A Comprehensive Method for Water Environment Assessment considering Trends of Water Quality. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Air curtain dust-collecting technology: Influence factors for air curtain performance. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 218 (November 2021).
- (2021): Bending behavior of cenosphere aluminum matrix syntactic foam-filled circular tubes. In: Engineering Structures, v. 243 (September 2021).
- (2019): Damage identification from static tests by eigenparameter decomposition and sparse regularization. In: Structural Health Monitoring, v. 19, n. 5 (Oktober 2019).
- (2005): The CCQC3 Method for Multi-Component Seismic Responses of Non-Classically Damped Irregular Structures. Vorgetragen bei: 2005 Structures Congress: Metropolis and Beyond & 2005 Forensic Engineering Symposium, New York (New York), USA, 20-24 April 2005.
- (2021): Analyses on long-term behavior of composite steel–concrete beams with weak interface using a state space approach. In: Engineering Structures, v. 231 (März 2021).
- (2013): Analysis of Fire Intelligent Inspection System. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Detection of Structural Damage in Rotating Beams using Modal Sensitivity Analysis and Sparse Regularization. In: International Journal of Structural Stability and Dynamics, v. 20, n. 8 (Juli 2020).
- (2020): Construction of 3D Creep Model of Landslide Slip-Surface Soil and Secondary Development Based on FLAC3D. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2018): Constitutive model of structural aluminum alloy under cyclic loading. In: Construction and Building Materials, v. 180 (August 2018).
- (2018): Classification Research Based on the Congestion of Urban Intersection. Vorgetragen bei: 2012 International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), August 10-12th 2012, Zhangjiajie (China).
- (2019): Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting. In: Construction and Building Materials, v. 221 (Oktober 2019).
- (2016): Distribution characteristics and influencing factors of the frequency-domain response of a vehicle–track vertical coupled system. In: Journal of Modern Transportation, v. 24, n. 3 (Juli 2016).
- (2018): A critical review of preparation design and workability measurement of concrete material for largescale 3D printing. In: Frontiers of Structural and Civil Engineering, v. 12, n. 3 (August 2018).
- (2018): Bearing capacity of embedded channel-shaped steel connections at precast concrete beam end. In: Engineering Structures, v. 175 (November 2018).
- (2018): Dynamic characteristics research of a ground fissure site at Xi'an, China. In: Tunnelling and Underground Space Technology, v. 82 (Dezember 2018).
- (2017): Cyclic Loading Tests of Structural Aluminum Alloy. Vorgetragen bei: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae kooperiert mit
