Kejin Wang 
- (2024): Hydration behavior and thermodynamic modelling of ferroaluminate cement blended with steel slag. In: Journal of Building Engineering, v. 97 (November 2024).
- (2023): Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime. In: Journal of Building Engineering, v. 80 (December 2023).
- (2024): Increase in Concrete Air Content due to Excessive Internal Vibration. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 2 (February 2024).
- (2024): Interfacial adhesion between recycled aggregate and asphalt mastic filled with recycled concrete powder. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Hydration and microstructure of cement paste mixed with seawater – An advanced investigation by SEM-EDS method. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Influences of Corrosion Degree and Uniformity on Bond Strength and Cracking Pattern of Cement Mortar and PVA-ECC. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (June 2023).
- (2023): Fracture behaviours of sustainable multi-recycled aggregate concrete under combined compression-shear loading. In: Journal of Building Engineering, v. 72 (August 2023).
- (2022): Enhancing concrete sulfate resistance by adding NaCl. In: Construction and Building Materials, v. 322 (March 2022).
- (2021): Influence of carbonate coarse aggregate properties on surface resistivity of high performance concrete. In: Construction and Building Materials, v. 312 (December 2021).
- (2021): Effects of seawater and undesalted sea sand on the hydration products, mechanical properties and microstructures of cement mortar. In: Construction and Building Materials, v. 310 (December 2021).
- (2016): Extended Use of Limestone Fines in Various Concretes. In: Journal of Civil Engineering and Architecture, v. 10, n. 9 (September 2016).
- (2020): Effects of mixing sequences of nanosilica on the hydration and hardening properties of cement-based materials. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): High temperature resistance of fly ash/GGBFS-based geopolymer mortar with load-induced damage. In: Materials and Structures, v. 53, n. 4 (26 June 2020).
- (2020): Effects of Ultrafine Powders on the Properties of the Lubrication Layer and Highly Flowable Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (May 2020).
- (2020): Effects of Modern Concrete Materials on Thermal Conductivity. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 4 (April 2020).
- (2020): Hydration mechanism and early frost resistance of calcium sulfoaluminate cement concrete. In: Construction and Building Materials, v. 239 (April 2020).
- (2020): Effects of nano-SiO2 and secondary water curing on the carbonation and chloride resistance of autoclaved concrete. In: Construction and Building Materials, v. 235 (February 2020).
- (2019): Evaluation of cement paste containing recycled stainless steel powder for sustainable additive manufacturing. In: Construction and Building Materials, v. 227 (December 2019).
- (2019): Electrical resistivity and mechanical properties of cementitious composites incorporating conductive rubber fibres. In: Smart Materials and Structures, v. 28, n. 8 (August 2019).
- (2011): Influences of mixture composition on properties and freeze–thaw resistance of RCC. In: Construction and Building Materials, v. 25, n. 1 (January 2011).
- (2014): Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times. In: Construction and Building Materials, v. 50 (January 2014).
- (2014): Influence of sodium aluminate on cement hydration and concrete properties. In: Construction and Building Materials, v. 64 (August 2014).
- (2014): Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes. In: Construction and Building Materials, v. 69 (October 2014).
- (2016): Influence of bleeding on properties and microstructure of fresh and hydrated Portland cement paste. In: Construction and Building Materials, v. 115 (July 2016).
- (2017): Influence of nano-SiO 2 on properties of fresh and hardened high performance concrete: A state-of-the-art review. In: Construction and Building Materials, v. 148 (September 2017).
- (2017): Influence of superplasticizer dosage on the viscosity of cement paste with low water-binder ratio. In: Construction and Building Materials, v. 149 (September 2017).
- (2015): Effects of paste-to-voids volume ratio on performance of self-consolidating concrete mixtures. In: Magazine of Concrete Research, v. 67, n. 14 (July 2015).
- (2018): Exploration of Mechanisms of Joint Deterioration in Concrete Pavements regarding Interfacial Transition Zone. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2007): Effects of Size and Uncompacted Voids of Aggregate on Mortar Flow Ability. In: Journal of Advanced Concrete Technology, v. 5, n. 1 ( 2007).
- (2006): Evaluation of Pavement Curing Effectiveness and Curing Effects on Concrete Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 18, n. 3 (June 2006).
Structurae cooperates with
