Kejin Wang 
- (2024): Concrete 3D printing technology for sustainable construction: A review on raw material, concrete type and performance. In: Developments in the Built Environment, v. 17 (März 2024).
- (2024): Effects of EVA and SAE Emulsions on Hydration and Drying Shrinkage of Calcium Sulfoaluminate Cement Pastes. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (Juli 2024).
- (2024): Characterization and evaluation of cement-based systems containing solution-treated municipal solid-waste incineration fly ash. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): A comprehensive review on self-healing cementitious composites with crystalline admixtures: Design, performance and application. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2021): Effect of chloride ingress on self-healing recovery of smart cementitious composite incorporating crystalline admixture and MgO expansive agent. In: Cement and Concrete Research, v. 139 (Januar 2021).
- (2021): Comparison on the properties of ITZs in fly ash-based geopolymer and Portland cement concretes with equivalent flowability. In: Cement and Concrete Research, v. 143 (Mai 2021).
- (2004): Effects of curing temperature and NaOH addition on hydration and strength development of clinker-free CKD-fly ash binders. In: Cement and Concrete Research, v. 34, n. 2 (Februar 2004).
- (2022): Effects of CNT and MgO–Type Expansive Agent on the Cracking Resistance of Face-Slab Concrete of CFRD. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 12 (Dezember 2022).
- (2022): Deterioration of concrete under coupled aggressive actions associated with load, temperature and chemical attacks: A comprehensive review. In: Construction and Building Materials, v. 322 (März 2022).
- (2022): Chloride-binding capacity of cement-GGBFS-nanosilica composites under seawater chloride-rich environment. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): A critical review on phase change materials (PCM) for sustainable and energy efficient building: Design, characteristic, performance and application. In: Energy and Buildings, v. 260 (April 2022).
- (2021): Chloride resistance of concrete containing nanoparticle-modified polymer cementitious coatings. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Activation energy of calcium sulfoaluminate cement-based materials. In: Materials and Structures, v. 54, n. 4 (2 Juli 2021).
- (2020): Effect of microlimestone on properties of self-consolidating concrete with manufactured sand and mineral admixture. In: Frontiers of Structural and Civil Engineering, v. 14, n. 6 (August 2020).
- (2020): Effect of steel slag on the hydration and strength development of calcium sulfoaluminate cement. In: Construction and Building Materials, v. 265 (Dezember 2020).
- (2020): Combined influence of nano‐CaCO 3 and polyvinyl alcohol fibers on fresh and mechanical performance of concrete incorporating fly ash. In: Structural Concrete, v. 21, n. 2 (April 2020).
- (2020): Effect of incompatibility between healing agent and cement matrix on self-healing performance of intelligent cementitious composite. In: Smart Materials and Structures, v. 29, n. 11 (September 2020).
- (2020): Assessing capacity of corroded angle members in steel structures based on experiment and simulation. In: Construction and Building Materials, v. 244 (Mai 2020).
- (2019): Effects of mix design parameters on heat of geopolymerization, set time, and compressive strength of high calcium fly ash geopolymer. In: Construction and Building Materials, v. 228 (Dezember 2019).
- (2019): Early-Age Strength of Alkali-Activated Slag Mortar Based on Burned Oyster Shell and Other Chemical Activators. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 9 (September 2019).
- (2007): Comparative Performance of Ground Clay Brick in Mitigation of Alkali–Silica Reaction. In: Journal of Materials in Civil Engineering (ASCE), v. 19, n. 12 (Dezember 2007).
- (2011): Capillary Transport in RCC: Water-to-Cement Ratio, Strength, and Freeze-Thaw Resistance. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 8 (August 2011).
- (2007): Activations and Properties of Cementitious Materials Made with Cement-Kiln Dust and Class F Fly Ash. In: Journal of Materials in Civil Engineering (ASCE), v. 19, n. 1 (Januar 2007).
- (2011): Effect of coarse aggregate characteristics on concrete rheology. In: Construction and Building Materials, v. 25, n. 3 (März 2011).
- (2013): Chemical shrinkage behavior of pastes made with different types of cements. In: Construction and Building Materials, v. 40 (März 2013).
- (2014): Assessing particle packing based self-consolidating concrete mix design method. In: Construction and Building Materials, v. 70 (November 2014).
- (2016): Effects of fibers on mechanical properties and freeze-thaw resistance of phosphogypsum-slag based cementitious materials. In: Construction and Building Materials, v. 121 (September 2016).
- (2016): 2D image analysis method for evaluating coarse aggregate characteristic and distribution in concrete. In: Construction and Building Materials, v. 127 (November 2016).
- (2009): Characterization and Performance Prediction of Cement-Based Materials Using a Simple Isothermal Calorimeter. In: Journal of Advanced Concrete Technology, v. 7, n. 3 ( 2009).
- (2010): The Early-Age Response of Concrete Pavements to Temperature and Moisture Variations. In: The Baltic Journal of Road and Bridge Engineering, v. 5, n. 3 (September 2010).
Structurae kooperiert mit
