Hao Wang 
- : Endochronic Plasticity Theory-Based Dynamic Damage Constitutive Model Development of Concrete Materials. In: KSCE Journal of Civil Engineering.
- (2024): Effects of Mg-based admixtures on chloride diffusion in alkali-activated fly ash-slag mortars. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Dynamic Responses of Single-Layer Reticulated Shells under Oblique Impact Loading. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2024): Efficient simulation of two-spatial dimensional turbulent wind fields based on the factorization of random functions. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 247 (April 2024).
- (2023): Effect of fly ash to slag ratio and Na2O content on leaching behaviour of fly Ash/Slag based alkali activated materials. In: Construction and Building Materials, v. 383 (June 2023).
- (2024): Effects of UHPC shear key on strengthening shear performances of wet joint in prefabricated composite beams. In: Engineering Structures, v. 299 (January 2024).
- (2023): Effects of mixed corrosion damage on constitutive relation and ductile fracture behavior of butt-welded joints under cyclic loading. In: Structures, v. 55 (September 2023).
- (2023): Dynamic performance of ultra-long stay cable in small-scale extreme winds. In: Engineering Structures, v. 290 (September 2023).
- (2023): The Effect of Preload Loss on the Mechanical Properties of Grid Structure Connected with Bolted-Ball Joints. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Efficient simulation of non-stationary non-homogeneous wind field: Fusion of multi-dimensional interpolation and NUFFT. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 236 (May 2023).
- (2023): Early hydration characteristics and kinetics model of cement pastes containing internal curing materials with different absorption behaviors. In: Construction and Building Materials, v. 383 (June 2023).
- (2022): Effect of Hidden Column Type on Seismic Performance of the Insulated Sandwich Wall Panel Joints with Ceramsite Concrete Layer. In: Buildings, v. 12, n. 12 (1 December 2022).
- (2023): Effect of hydroxypropyl methyl cellulose (HPMC) as foam stabilizer on the workability and pore structure of iron tailings sand autoclaved aerated concrete. In: Construction and Building Materials, v. 376 (May 2023).
- (2022): Effects of different design factors on the shear performance of assembled steel–concrete composite beam with local laminated joint. In: Structures, v. 46 (December 2022).
- (2022): Eco-friendly treatment of recycled concrete fines as supplementary cementitious materials. In: Construction and Building Materials, v. 322 (March 2022).
- (2021): Effect of reinforced fibers on the vibration characteristics of fibers reinforced composite shaft tubes with metal flanges. In: Composite Structures, v. 275 (November 2021).
- (2021): The effect of MWCNTs with different diameters on the interface properties of Ti/CFRP fiber metal laminates. In: Composite Structures, v. 266 (June 2021).
- (2021): Dynamic response of timber pile ground improvement: 3D numerical simulations. In: Soil Dynamics and Earthquake Engineering, v. 143 (April 2021).
- (2020): Effect of slightly cadmium-enriched kenaf straw on the mechanical and thermal properties of cement mortar. In: European Journal of Environmental and Civil Engineering, v. 26, n. 9 (December 2020).
- (2020): Effect of the interference fit on the stress distribution and failure mode of a flat-head riveted GLARE joint. In: Composite Structures, v. 235 (March 2020).
- (2014): Effect of Surface Friction on Tire–Pavement Contact Stresses during Vehicle Maneuvering. In: Journal of Engineering Mechanics (ASCE), v. 140, n. 4 (April 2014).
- (2019): Effects of temperature and lead core heating on response of seismically isolated bridges under near-fault excitations. In: Advances in Structural Engineering, v. 22, n. 14 (June 2019).
- (2019): Effect of cleaned corrosion surface topography on mechanical properties of cold-formed thin-walled steel. In: Construction and Building Materials, v. 222 (October 2019).
- (2016): Effects of corrosion on surface characterization and mechanical properties of butt-welded joints. In: Journal of Constructional Steel Research, v. 126 (November 2016).
- (2018): Effect of pitting degradation on ductile fracture initiation of steel butt-welded joints. In: Journal of Constructional Steel Research, v. 148 (September 2018).
- (2012): Effects of Curing Time and Reheating on Performance of Warm Stone-Matrix Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 11 (November 2012).
- (2017): Effects of polymerized sulfur on rheological properties, morphology and stability of SBS modified asphalt. In: Construction and Building Materials, v. 150 (September 2017).
- (2017): Dynamics research on grouping characteristics of a shield tunneling machine's thrust system. In: Automation in Construction, v. 76 (April 2017).
- (2018): Efficacy of Interpolation-Enhanced Schemes in Random Wind Field Simulation over Long-Span Bridges. In: Journal of Bridge Engineering (ASCE), v. 23, n. 3 (March 2018).
- (2018): Effect of width–thickness ratio on capacity of pultruded square hollow polymer columns. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 171, n. 11 (November 2018).
Structurae cooperates with
