0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

P. Visintin ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Sepulveda, B. D. G. / Visintin, P. / Sturm, A. B. / Oehlers, D. J. (2024): Experimental and theoretical analysis of cracking and tension stiffening in UHPFRC under high‐cycle fatigue. In: Structural Concrete, v. 25, n. 1 (January 2024).

    https://doi.org/10.1002/suco.202200815

  2. Gravina, R. J. / Li, J. / Aydin, H. / Setunge, S. / Visintin, P. / Smith, S. T. / Al-Mahaidi, R. (2018): Bond Performance of F RP-Strengthened Reinforced Concrete In Aggressive Environmental Conditions. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-33

  3. Chen, S. / Visintin, P. / Oehlers, D. J. (2022): Bond between very-high and ultra-high performance fibre reinforced concrete and profiled deck sheeting. In: Journal of Building Engineering, v. 52 (July 2022).

    https://doi.org/10.1016/j.jobe.2022.104426

  4. Burton, C. / Vaculik, J. / Griffith, M. C. / Visintin, P. (2022): In-situ testing of the shear strength of masonry joints – Proposal for a new Simplified testing approach and Comparison to existing techniques. In: Construction and Building Materials, v. 321 (February 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.126319

  5. Sun, M. / Visintin, P. / Bennett, T. (2022): The effect of specimen size on autogenous and total shrinkage of ultra-high performance concrete (UHPC). In: Construction and Building Materials, v. 327 (April 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.126952

  6. Sturm, A. B. / Visintin, P. / Bennett, B. (2022): A hybrid deterministic-probabilistic approach for the characteristic crack widths and crack spacings in reinforced concrete tension and flexural members. In: Engineering Structures, v. 256 (April 2022).

    https://doi.org/10.1016/j.engstruct.2022.114071

  7. Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J. (2021): Laboratory investigation of pull-out capacity of chemical anchors in individual new and vintage masonry units under quasi-static, cyclic and impact load. In: Structures, v. 34 (December 2021).

    https://doi.org/10.1016/j.istruc.2021.08.016

  8. Sturm, A. B. / Visintin, P. / Oehlers, D. J. (2021): Design-Oriented Solutions for the Shear Capacity of Reinforced Concrete Beams with and without Fibers. In: Journal of Structural Engineering (ASCE), v. 147, n. 6 (June 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0003023

  9. Sturm, A. B. / Visintin, P. / Oehlers, D. J. (2021): Mechanics of Shear Failure in Fiber-Reinforced Concrete Beams. In: Journal of Structural Engineering (ASCE), v. 147, n. 3 (March 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002934

  10. Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J. (2020): Field testing of vintage masonry: Mechanical properties and anchorage strengths. In: Structures, v. 28 (December 2020).

    https://doi.org/10.1016/j.istruc.2020.10.023

  11. Sturm, A. B. / Visintin, P. / Seracino, R. / Lucier, G. W. / Oehlers, D. J. (2020): Flexural performance of pretensioned ultra-high performance fibre reinforced concrete beams with CFRP tendons. In: Composite Structures, v. 243 (July 2020).

    https://doi.org/10.1016/j.compstruct.2020.112223

  12. Visintin, P. / Mohamad Ali, M. S. / Xie, T. / Sturm, A. B. (2018): Experimental investigation of moment redistribution in ultra-high performance fibre reinforced concrete beams. In: Construction and Building Materials, v. 166 (March 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.01.156

  13. Albitar, M. / Mohamed Ali, M. S. / Visintin, P. (2018): Evaluation of tension-stiffening, crack spacing and crack width of geopolymer concretes. In: Construction and Building Materials, v. 160 (January 2018).

    https://doi.org/10.1016/j.conbuildmat.2017.11.085

  14. Visintin, P. / Sturm, A. B. / Ali, M. S. Mohamed / Oehlers, D. J. (2018): Blending macro- and micro-fibres to enhance the serviceability behaviour of UHPFRC. In: Australian Journal of Civil Engineering, v. 16, n. 2 ( 2018).

    https://doi.org/10.1080/14488353.2018.1463608

  15. Chen, Y. / Visintin, P. / Oehlers, D. J. (2016): Extracting Size-Dependent Stress–Strain Relationships from FRP-Confined Concrete Cylinders for Varying Diameters and Heights. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 5 (May 2016).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001482

  16. Albitar, M. / Visintin, P. / Ali, M. S. Mohamed / Lavigne, O. / Gamboa, E. (2017): Bond Slip Models for Uncorroded and Corroded Steel Reinforcement in Class-F Fly Ash Geopolymer Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 1 (January 2017).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001713

  17. Oehlers, D. J. / Visintin, P. / Lucas, W. (2016): Fundamental Mechanics Governing FRP-Retrofitted RC Beams with Anchored and Prestressed FRP Plates. In: Journal of Composites for Construction, v. 20, n. 6 (December 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000710

  18. Oehlers, D. J. / Visintin, P. / Haskett, M. / Sebastian, W. M. (2013): Flexural ductility fundamental mechanisms governing all RC members in particular FRP RC. In: Construction and Building Materials, v. 49 (December 2013).

    https://doi.org/10.1016/j.conbuildmat.2013.02.018

  19. Albitar, M. / Ali, M. S. Mohamed / Visintin, P. / Drechsler, M. (2015): Effect of granulated lead smelter slag on strength of fly ash-based geopolymer concrete. In: Construction and Building Materials, v. 83 (May 2015).

    https://doi.org/10.1016/j.conbuildmat.2015.03.009

  20. Sobuz, H. R. / Visintin, P. / Ali, M. S. Mohamed / Singh, M. / Griffith, M. C. / Sheikh, A. H. (2016): Manufacturing ultra-high performance concrete utilising conventional materials and production methods. In: Construction and Building Materials, v. 111 (May 2016).

    https://doi.org/10.1016/j.conbuildmat.2016.02.102

  21. Albitar, M. / Ali, M. S. Mohamed / Visintin, P. / Drechsler, M. (2017): Durability evaluation of geopolymer and conventional concretes. In: Construction and Building Materials, v. 136 (April 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.01.056

  22. Singh, M. / Sheikh, A. H. / Ali, M. S. Mohamed / Visintin, P. / Griffith, M. C. (2017): Experimental and numerical study of the flexural behaviour of ultra-high performance fibre reinforced concrete beams. In: Construction and Building Materials, v. 138 (May 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.02.002

  23. Albitar, M. / Ali, M. S. Mohamed / Visintin, P. (2017): Experimental study on fly ash and lead smelter slag-based geopolymer concrete columns. In: Construction and Building Materials, v. 141 (June 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.03.014

  24. Albitar, M. / Visintin, P. / Ali, M. S. Mohamed / Drechsler, M. (2015): Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash. In: KSCE Journal of Civil Engineering, v. 19, n. 5 (February 2015).

    https://doi.org/10.1007/s12205-014-1254-z

  25. Chen, Y. / Zhang, T. / Visintin, P. / Oehlers, D. J. (2015): Concrete Shear-Friction Material Properties: Application to Shear Capacity of RC Beams of All Sizes. In: Advances in Structural Engineering, v. 18, n. 8 (August 2015).

    https://doi.org/10.1260/1369-4332.18.8.1187

  26. Chen, Y. / Visintin, P. / Oehlers, D. J. (2015): Concrete Shear-Friction Material Properties: Derivation from Actively Confined Compression Cylinder Tests. In: Advances in Structural Engineering, v. 18, n. 8 (August 2015).

    https://doi.org/10.1260/1369-4332.18.8.1173

  27. Knight, D. / Visintin, P. / Oehlers, D. J. / Jumaat, M. Z. (2013): Incorporating Residual Strains in the Flexural Rigidity of RC Members with Varying Degrees of Prestress and Cracking. In: Advances in Structural Engineering, v. 16, n. 10 (October 2013).

    https://doi.org/10.1260/1369-4332.16.10.1701

  28. Visintin, P. / Oehlers, D. J. / Wu, C. / Haskett, M. (2012): A mechanics solution for hinges in RC beams with multiple cracks. In: Engineering Structures, v. 36 (March 2012).

    https://doi.org/10.1016/j.engstruct.2011.11.028

  29. Visintin, P. / Oehlers, D. J. / Haskett, M. / Wu, C. (2013): Mechanics-Based Hinge Analysis for Reinforced Concrete Columns. In: Journal of Structural Engineering (ASCE), v. 139, n. 11 (November 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000761

  30. Sturm, A. B. / Visintin, P. / Farries, K. / Oehlers, D. J. (2018): New Testing Approach for Extracting the Shear Friction Material Properties of Ultra-High-Performance Fiber-Reinforced Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (October 2018).

    https://doi.org/10.1061/(asce)mt.1943-5533.0002427

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine