0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

P. Visintin ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Sepulveda, B. D. G. / Visintin, P. / Sturm, A. B. / Oehlers, D. J. (2024): Experimental and theoretical analysis of cracking and tension stiffening in UHPFRC under high‐cycle fatigue. In: Structural Concrete, v. 25, n. 1 (Januar 2024).

    https://doi.org/10.1002/suco.202200815

  2. Gravina, R. J. / Li, J. / Aydin, H. / Setunge, S. / Visintin, P. / Smith, S. T. / Al-Mahaidi, R. (2018): Bond Performance of F RP-Strengthened Reinforced Concrete In Aggressive Environmental Conditions. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-33

  3. Chen, S. / Visintin, P. / Oehlers, D. J. (2022): Bond between very-high and ultra-high performance fibre reinforced concrete and profiled deck sheeting. In: Journal of Building Engineering, v. 52 (Juli 2022).

    https://doi.org/10.1016/j.jobe.2022.104426

  4. Burton, C. / Vaculik, J. / Griffith, M. C. / Visintin, P. (2022): In-situ testing of the shear strength of masonry joints – Proposal for a new Simplified testing approach and Comparison to existing techniques. In: Construction and Building Materials, v. 321 (Februar 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.126319

  5. Sun, M. / Visintin, P. / Bennett, T. (2022): The effect of specimen size on autogenous and total shrinkage of ultra-high performance concrete (UHPC). In: Construction and Building Materials, v. 327 (April 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.126952

  6. Sturm, A. B. / Visintin, P. / Bennett, B. (2022): A hybrid deterministic-probabilistic approach for the characteristic crack widths and crack spacings in reinforced concrete tension and flexural members. In: Engineering Structures, v. 256 (April 2022).

    https://doi.org/10.1016/j.engstruct.2022.114071

  7. Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J. (2021): Laboratory investigation of pull-out capacity of chemical anchors in individual new and vintage masonry units under quasi-static, cyclic and impact load. In: Structures, v. 34 (Dezember 2021).

    https://doi.org/10.1016/j.istruc.2021.08.016

  8. Sturm, A. B. / Visintin, P. / Oehlers, D. J. (2021): Design-Oriented Solutions for the Shear Capacity of Reinforced Concrete Beams with and without Fibers. In: Journal of Structural Engineering (ASCE), v. 147, n. 6 (Juni 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0003023

  9. Sturm, A. B. / Visintin, P. / Oehlers, D. J. (2021): Mechanics of Shear Failure in Fiber-Reinforced Concrete Beams. In: Journal of Structural Engineering (ASCE), v. 147, n. 3 (März 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002934

  10. Burton, C. / Visintin, P. / Griffith, M. / Vaculik, J. (2020): Field testing of vintage masonry: Mechanical properties and anchorage strengths. In: Structures, v. 28 (Dezember 2020).

    https://doi.org/10.1016/j.istruc.2020.10.023

  11. Sturm, A. B. / Visintin, P. / Seracino, R. / Lucier, G. W. / Oehlers, D. J. (2020): Flexural performance of pretensioned ultra-high performance fibre reinforced concrete beams with CFRP tendons. In: Composite Structures, v. 243 (Juli 2020).

    https://doi.org/10.1016/j.compstruct.2020.112223

  12. Visintin, P. / Mohamad Ali, M. S. / Xie, T. / Sturm, A. B. (2018): Experimental investigation of moment redistribution in ultra-high performance fibre reinforced concrete beams. In: Construction and Building Materials, v. 166 (März 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.01.156

  13. Albitar, M. / Mohamed Ali, M. S. / Visintin, P. (2018): Evaluation of tension-stiffening, crack spacing and crack width of geopolymer concretes. In: Construction and Building Materials, v. 160 (Januar 2018).

    https://doi.org/10.1016/j.conbuildmat.2017.11.085

  14. Visintin, P. / Sturm, A. B. / Ali, M. S. Mohamed / Oehlers, D. J. (2018): Blending macro- and micro-fibres to enhance the serviceability behaviour of UHPFRC. In: Australian Journal of Civil Engineering, v. 16, n. 2 ( 2018).

    https://doi.org/10.1080/14488353.2018.1463608

  15. Chen, Y. / Visintin, P. / Oehlers, D. J. (2016): Extracting Size-Dependent Stress–Strain Relationships from FRP-Confined Concrete Cylinders for Varying Diameters and Heights. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 5 (Mai 2016).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001482

  16. Albitar, M. / Visintin, P. / Ali, M. S. Mohamed / Lavigne, O. / Gamboa, E. (2017): Bond Slip Models for Uncorroded and Corroded Steel Reinforcement in Class-F Fly Ash Geopolymer Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 1 (Januar 2017).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001713

  17. Oehlers, D. J. / Visintin, P. / Lucas, W. (2016): Fundamental Mechanics Governing FRP-Retrofitted RC Beams with Anchored and Prestressed FRP Plates. In: Journal of Composites for Construction, v. 20, n. 6 (Dezember 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000710

  18. Oehlers, D. J. / Visintin, P. / Haskett, M. / Sebastian, W. M. (2013): Flexural ductility fundamental mechanisms governing all RC members in particular FRP RC. In: Construction and Building Materials, v. 49 (Dezember 2013).

    https://doi.org/10.1016/j.conbuildmat.2013.02.018

  19. Albitar, M. / Ali, M. S. Mohamed / Visintin, P. / Drechsler, M. (2015): Effect of granulated lead smelter slag on strength of fly ash-based geopolymer concrete. In: Construction and Building Materials, v. 83 (Mai 2015).

    https://doi.org/10.1016/j.conbuildmat.2015.03.009

  20. Sobuz, H. R. / Visintin, P. / Ali, M. S. Mohamed / Singh, M. / Griffith, M. C. / Sheikh, A. H. (2016): Manufacturing ultra-high performance concrete utilising conventional materials and production methods. In: Construction and Building Materials, v. 111 (Mai 2016).

    https://doi.org/10.1016/j.conbuildmat.2016.02.102

  21. Albitar, M. / Ali, M. S. Mohamed / Visintin, P. / Drechsler, M. (2017): Durability evaluation of geopolymer and conventional concretes. In: Construction and Building Materials, v. 136 (April 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.01.056

  22. Singh, M. / Sheikh, A. H. / Ali, M. S. Mohamed / Visintin, P. / Griffith, M. C. (2017): Experimental and numerical study of the flexural behaviour of ultra-high performance fibre reinforced concrete beams. In: Construction and Building Materials, v. 138 (Mai 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.02.002

  23. Albitar, M. / Ali, M. S. Mohamed / Visintin, P. (2017): Experimental study on fly ash and lead smelter slag-based geopolymer concrete columns. In: Construction and Building Materials, v. 141 (Juni 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.03.014

  24. Albitar, M. / Visintin, P. / Ali, M. S. Mohamed / Drechsler, M. (2015): Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash. In: KSCE Journal of Civil Engineering, v. 19, n. 5 (Februar 2015).

    https://doi.org/10.1007/s12205-014-1254-z

  25. Chen, Y. / Zhang, T. / Visintin, P. / Oehlers, D. J. (2015): Concrete Shear-Friction Material Properties: Application to Shear Capacity of RC Beams of All Sizes. In: Advances in Structural Engineering, v. 18, n. 8 (August 2015).

    https://doi.org/10.1260/1369-4332.18.8.1187

  26. Chen, Y. / Visintin, P. / Oehlers, D. J. (2015): Concrete Shear-Friction Material Properties: Derivation from Actively Confined Compression Cylinder Tests. In: Advances in Structural Engineering, v. 18, n. 8 (August 2015).

    https://doi.org/10.1260/1369-4332.18.8.1173

  27. Knight, D. / Visintin, P. / Oehlers, D. J. / Jumaat, M. Z. (2013): Incorporating Residual Strains in the Flexural Rigidity of RC Members with Varying Degrees of Prestress and Cracking. In: Advances in Structural Engineering, v. 16, n. 10 (Oktober 2013).

    https://doi.org/10.1260/1369-4332.16.10.1701

  28. Visintin, P. / Oehlers, D. J. / Wu, C. / Haskett, M. (2012): A mechanics solution for hinges in RC beams with multiple cracks. In: Engineering Structures, v. 36 (März 2012).

    https://doi.org/10.1016/j.engstruct.2011.11.028

  29. Visintin, P. / Oehlers, D. J. / Haskett, M. / Wu, C. (2013): Mechanics-Based Hinge Analysis for Reinforced Concrete Columns. In: Journal of Structural Engineering (ASCE), v. 139, n. 11 (November 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000761

  30. Sturm, A. B. / Visintin, P. / Farries, K. / Oehlers, D. J. (2018): New Testing Approach for Extracting the Shear Friction Material Properties of Ultra-High-Performance Fiber-Reinforced Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (Oktober 2018).

    https://doi.org/10.1061/(asce)mt.1943-5533.0002427

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine