Vanissorn Vimonsatit 
- (2016): Residual Strength of Blended Cement Pastes and Mortar Exposed to Elevated Temperatures. In: Electronic Journal of Structural Engineering, v. 16 (January 2016).
- (2022): Determination of Shear Capacity for Load Rating of Concrete Bridges to AS 5100.7-2017. In: Infrastructures, v. 7, n. 11 (November 2022).
- (2016): Thermal and mechanical transient behaviour of steel doors installed in non-load-bearing partition wall assemblies during exposure to the standard fire test. In: Fire and Materials, v. 40, n. 8 (May 2016).
- (2023): The Influence of Moisture on the Frequency Spectrum of Time Varying Mass Engineering Structure. In: Civil Engineering Journal, v. 9, n. 1 (1 January 2023).
- (2022): Nonlinear Response of RC Columns Subjected to Equal Energy-Double Impact Loads. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Shear capacity of inverted-U reinforced concrete bridge beams. In: Australian Journal of Structural Engineering, v. 23, n. 3 (May 2022).
- (2021): Aggregate Geometry Generation Method Using a Structured Light 3D Scanner, Spherical Harmonics–Based Geometry Reconstruction, and Placing Algorithms for Mesoscale Modeling of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021).
- (2020): Cohesive-strength properties versus porosity of cementitious materials. In: Construction and Building Materials, v. 258 (October 2020).
- (2021): Critical amount of corrosion and failure behavior of flexural reinforced concrete beams. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Identification of transversely isotropy of calcium silicate hydrate using nanoindentation and finite element analysis. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Mechanical and Microstructural Properties of Alkali Pozzolan Cement (APC). In: International Journal of Civil Engineering, v. 18, n. 11 (June 2020).
- (2018): Creep properties of cement and alkali activated fly ash materials using nanoindentation technique. In: Construction and Building Materials, v. 168 (April 2018).
- (2014): Effect of cooling methods on residual compressive strength and cracking behavior of fly ash concretes exposed at elevated temperatures. In: Fire and Materials, v. 40, n. 2 (October 2014).
- (2019): Pounding of seismically designed low-rise reinforced concrete frames. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 172, n. 11 (November 2019).
- (2018): Recommendations for Designing Reinforced Concrete Beams Against Low Velocity Impact Loads. In: International Journal of Structural Stability and Dynamics, v. 18, n. 9 (September 2018).
- (2015): Flexural behaviour of hybrid polyvinyl alcohol fibre-reinforced ferrocement containing different fibre types and volume fractions. In: Australian Journal of Structural Engineering, v. 16, n. 4 (October 2015).
- (2019): Abrasion resistance behaviour of fly ash based geopolymer using nanoindentation and artificial neural network. In: Construction and Building Materials, v. 212 (July 2019).
- (2007): Shear strength of plate girder web panel at elevated temperature. In: Journal of Constructional Steel Research, v. 63, n. 11 (November 2007).
- (2016): Material Classification and Composite Elastic Modulus of Hybrid PVA Fiber Ferrocement. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 9 (September 2016).
- (2014): Design and development of Alkali Pozzolan Cement (APC). In: Construction and Building Materials, v. 68 (October 2014).
- (2016): Mechanical and micromechanical properties of alkali activated fly-ash cement based on nano-indentation. In: Construction and Building Materials, v. 107 (March 2016).
- (2012): Shear Behaviour of Ligthweight Sandwich Reinforced Concrete Slabs. In: Advances in Structural Engineering, v. 15, n. 10 (October 2012).
- (1993): Shakedown of Frames with Semirigid Connections. In: Journal of Structural Engineering (ASCE), v. 119, n. 6 (June 1993).
Structurae cooperates with
