José Turmo 
- (2018): Inverse analysis using compatible displacements. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
- (2022): Experimental Verification of a Novel Accelerometer Intended for Structural Health Monitoring of Bridges. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2022): Beneficial Effect of Combining Similar Low-Cost Accelerometer to improve the overall Accuracy and Noise Density. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2022): Finite Fault Source Model for Ground Motion near Fault Zone. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2022): Analytical Study on Tubular Flange Girder Bridges Using High Strength Steel. Presented at: IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022.
- (2022): Development of an accurate low-cost device for structural vibration acquisition. Presented at: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2021): Benchmark model updating for cable stayed bridges. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2021): Acceleration data quality assessment for bridge structural health monitoring via statistical and deep-learning approach. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2021): Analytical observability method for the structural system identification of wide-flange box girder bridges with the effect of shear lag. In: Automation in Construction, v. 131 (November 2021).
- (2018): Compatible Deformation in the Condition Assessment of Beam Structures. Presented at: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2013): Application of Observability Techniques to Structural System Identification. In: Computer-Aided Civil and Infrastructure Engineering, v. 28, n. 6 (March 2013).
- (2020): Calibration of the descent local search algorithm parameters using orthogonal arrays. In: Computer-Aided Civil and Infrastructure Engineering, v. 35, n. 9 (February 2020).
- (2014): Creep and shrinkage effects in service stresses of concrete cable-stayed bridges. In: Computers and Concrete, v. 13, n. 4 (May 2014).
- (2010): Effect of Hanger Flexibility on Dynamic Response of Suspension Bridges. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 12 (December 2010).
- (2012): Construction of Cable-Stayed Bridges Built on Temporary Supports. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2010): Linear vertical vibrations of suspension bridges: A review of continuum models and some new results. In: Soil Dynamics and Earthquake Engineering, v. 30, n. 9 (September 2010).
- (2016): Comparison Among Different Structural System Identification Methods. Presented at: IABSE Conference: Bridges and Structures Sustainability - Seeking Intelligent Solutions, Guangzhou, China, 8-11 May 2016.
- (2006): Bridges without Shear Reinforcement. Presented at: IABSE Symposium: Responding to Tomorrow's Challenges in Structural Engineering, Budapest, Hungary, 13-15 September 2006.
- (2017): Error analysis of structural system identification by observability method. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2017): Analysis of cable-stayed bridge construction. Presented at: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2013): Direct simulation of the tensioning process of cable-stayed bridges. In: Computers & Structures, v. 121 (May 2013).
- (2018): Constrained observability method in static structural system identification. In: Structural Control and Health Monitoring, v. 25, n. 1 (January 2018).
- (2017): Analysis of measurement and simulation errors in structural system identification by observability techniques. In: Structural Control and Health Monitoring, v. 24, n. 6 (June 2017).
- (2016): Improved Construction of Concrete Viaducts with Movable Scaffolding Systems in Spain. In: Journal of Bridge Engineering (ASCE), v. 21, n. 9 (September 2016).
- (2015): The Effects in service of the staggered construction of cable-stayed bridges built on temporary supports. In: The Baltic Journal of Road and Bridge Engineering, v. 10, n. 3 (September 2015).
- (2006): Comportamiento estructural de puentes de dovelas prefabricadas con pretensado exterior y junta seca. Segunda parte: Modelización de ensayos. In: Hormigón y acero, v. 57, n. 240 (2nd Quarter 2006).
- (2006): Comportamiento estructural de puentes de dovelas prefabricadas con pretensado exterior y junta seca. Primera parte: Ensayos de vigas. In: Hormigón y acero, v. 57, n. 240 (2nd Quarter 2006).
- (2015): Dealing with the peculiarities of the structural system identification of cable-stayed bridges by observability techniques. Presented at: IABSE Conference: Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland, September 2015.
- (2015): E-Learning, The future of Structural Engineering Education?. Presented at: IABSE Conference: Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland, September 2015.
- (2011): Calculation of the Objective Service State in Cable-Stayed Bridges. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
Structurae cooperates with
