Thomas Tannert 
- (2024): Experimental Study on the Quasi-Static Cyclic and Dynamic Performance of Two-Story Platform Cross-Laminated Timber Mock-Ups. In: Journal of Performance of Constructed Facilities (ASCE), v. 38, n. 6 (December 2024).
- (2024): Out-of-plane cross-angle bending stiffness of cross-laminated timber. In: Engineering Structures, v. 319 (November 2024).
- (2023): Reinforced cross-laminated timber-concrete composite floor systems. In: Engineering Structures, v. 291 (September 2023).
- (2022): Performance of coupled CLT shear walls with internal perforated steel plates as vertical joints and hold-downs. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Performance of glued-in rod timber joints under seawater and UV exposure cycles. In: Construction and Building Materials, v. 322 (March 2022).
- (2021): Hyperelastic hold-down solution for CLT shear walls. In: Construction and Building Materials, v. 289 (June 2021).
- (2022): Prevention of Disproportionate Collapse for Multistory Mass Timber Buildings: Review of Current Practices and Recent Research. In: Journal of Structural Engineering (ASCE), v. 148, n. 7 (July 2022).
- (2022): In Brettsperrholz eingeklebte Stahlgewindestäbe – Experimente, numerische Simulation und Traglastbestimmung. In: Bautechnik, v. 100 (May 2022).
- (2021): Finite element analysis of alternative load paths to prevent disproportionate collapse in platform-type CLT floor systems. In: Engineering Structures, v. 240 (August 2021).
- (2021): The influence of connection stiffness on the dynamic properties and seismic performance of tall cross-laminated timber buildings. In: Engineering Structures, v. 238 (July 2021).
- (2018): Feasibility Study of Mass-Timber Cores for the UBC Brock Commons Tallwood Building. Presented at: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2018): Hybrid CLT-Based Modular Construction Systems for Prefabricated Buildings. Presented at: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2021): Experimental study on orthogonal joints in cross-laminated timber with self-tapping screws installed with mixed angles. In: Engineering Structures, v. 228 (February 2021).
- (2018): Numerical investigations and capacity prediction of G-FRP rods glued into timber. In: Composite Structures, v. 202 (October 2018).
- (2020): Hybrides Tragwerk des 18‐stöckigen Studentenwohnheims "Tall Wood Building" in Vancouver und Alternative in Holz. In: Bautechnik, v. 97 (April 2020).
- (2018): High-capacity hold-down for mass-timber buildings. In: Construction and Building Materials, v. 164 (March 2018).
- : Feasibility Study of a Novel Tall Concrete-Wood Hybrid System. Presented at: Structures Congress 2017, April 6–8, 2017, Denver, Colorado.
- (2018): In-Plane Strength and Stiffness of Cross-Laminated Timber Shear Walls. In: Buildings, v. 8, n. 8 (July 2018).
- (2018): Feasibility Study of Mass-Timber Cores for the UBC Tall Wood Building. In: Buildings, v. 8, n. 8 (July 2018).
- (2019): Group Effects for Shear Connections with Self-Tapping Screws in CLT. In: Journal of Structural Engineering (ASCE), v. 145, n. 8 (August 2019).
- (2019): Flange-notched wood I-joists reinforced with OSB collars: Experimental investigation and sensitivity analysis. In: Structures, v. 19 (June 2019).
- (2016): Improved performance of reinforced rounded dovetail joints. In: Construction and Building Materials, v. 118 (August 2016).
- (2014): In situ assessment of structural timber using stress-wave measurements. In: Materials and Structures, v. 47, n. 5 (May 2014).
- (2014): In situ assessment of structural timber using non-destructive techniques. In: Materials and Structures, v. 47, n. 5 (May 2014).
- (2014): In situ assessment of structural timber using semi-destructive techniques. In: Materials and Structures, v. 47, n. 5 (May 2014).
- (2018): Numerical optimisation of novel connection for cross-laminated timber buildings. In: Engineering Structures, v. 175 (November 2018).
- (2017): Reinforced Wood I-Joists with Web Openings. In: Journal of Structural Engineering (ASCE), v. 143, n. 6 (June 2017).
- (2018): In-Plane Stiffness of Hybrid Steel–Cross-Laminated Timber Floor Diaphragms. In: Journal of Structural Engineering (ASCE), v. 144, n. 8 (August 2018).
- (2017): In-Plane Stiffness of Cross-Laminated Timber Panels with Openings. In: Structural Engineering International, v. 27, n. 2 (May 2017).
- (2010): Probabilistische Bemessung von geklebten Anschlüssen im Holzbau. In: Bautechnik, v. 87, n. 10 (October 2010).
Structurae cooperates with
