Toru Takeuchi 
- (2023): Generalized response spectrum analysis based computational morphogenesis for metal gridshells with buckling-restrained braces subjected to seismic loading. In: Computers & Structures, v. 275 (January 2023).
- (2022): Optimal Mixed Placement and Capacity Distribution of Buckling-Restrained Braces and Conventional Braces on a Large Metal Spatial Structure Without Rigid Diaphragm Assumption. In: Frontiers in Built Environment, v. 8 (February 2022).
- (2022): Performance and failure modes of mass timber buckling-restrained braces under cyclic loading. In: Engineering Structures, v. 266 (September 2022).
- (2022): Equivalent static loads for double-layered domes supported by multistorey buckling-restrained braced frames. In: International Journal of Space Structures, v. 37, n. 4 (June 2022).
- (2022): A novel damped braced tube system for tall buildings in high seismic zones. In: The Structural Design of Tall and Special Buildings, v. 31, n. 8 (19 April 2022).
- (2022): Experimental Investigation of Friction at Buckling-Restrained Brace Debonding Interfaces. In: Journal of Structural Engineering (ASCE), v. 148, n. 2 (February 2022).
- (2021): First mode damping ratio oriented optimal design procedure for damped outrigger systems with additional linear viscous dampers. In: Engineering Structures, v. 247 (November 2021).
- (2021): Higher mode effects of multistorey substructures on the seismic response of double-layered steel gridshell domes. In: Engineering Structures, v. 243 (September 2021).
- (2001): Evaluation Of Safety On Evacuation Behavior From An Underground Space During An Earthquake. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 689 (October 2001).
- (2021): Experimental dynamic characterization of friction brace dampers and application to the seismic retrofit of RC buildings. In: Engineering Structures, v. 242 (September 2021).
- (2018): Elasto-Plastic Damper Optimization Routine for Lattice Towers Based on Generalized Response Spectrum Analysis. In: Journal of the International Association for Shell and Spatial Structures, v. 59, n. 4 (December 2018).
- (2021): Higher‐mode buckling and friction in long and large‐scale buckling‐restrained braces. In: The Structural Design of Tall and Special Buildings, v. 30, n. 1 (January 2021).
- (2020): Experimental and numerical studies on buckling restrained braces with posttensioned carbon fiber composite cables. In: Earthquake Engineering and Structural Dynamics, v. 49, n. 15 (December 2020).
- (2020): Composite behavior in RC buildings retrofitted using buckling-restrained braces with elastic steel frames. In: Engineering Structures, v. 219 (September 2020).
- (2020): Experimental investigation of a multistage buckling-restrained brace. In: Engineering Structures, v. 213 (June 2020).
- (2020): Method of reinforcement for joints between steel roofs and RC columns in existing buildings. In: Engineering Structures, v. 209 (April 2020).
- (2020): Experimental and analytical studies of sub-standard RC frames retrofitted with buckling-restrained braces and steel frames. In: Bulletin of Earthquake Engineering, v. 18, n. 5 (January 2020).
- (2019): Optimal damper design strategy for braced structures based on generalized response spectrum analysis. In: Japan Architectural Review, v. 2, n. 4 (September 2019).
- (2019): Optimal design of multiple damped-outrigger system incorporating buckling-restrained braces. In: Engineering Structures, v. 194 (September 2019).
- (2015): Damage Distribution based Energy-Dissipation Retrofit Method for Multi Story RC Building in Turkey. Presented at: IABSE Conference: Elegance in structures, Nara, Japan, 13-15 May 2015.
- (2016): Out-of-plane stability assessment of buckling-restrained braces including connections with chevron configuration. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 12 (10 October 2016).
- (2014): Out-of-plane stability of buckling-restrained braces including moment transfer capacity. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 6 (25 April 2014).
- (2011): Development of the core-suspended isolation system. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 4 (10 April 2011).
- (2015): Cumulative Deformation Capacity of Steel Braces under Various Cyclic Loading Histories. In: Journal of Structural Engineering (ASCE), v. 141, n. 7 (July 2015).
- (2011): Cumulative Cyclic Deformation Capacity of Circular Tubular Braces under Local Buckling. In: Journal of Structural Engineering (ASCE), v. 137, n. 11 (November 2011).
- (2008): Estimation of Cumulative Deformation Capacity of Buckling Restrained Braces. In: Journal of Structural Engineering (ASCE), v. 134, n. 5 (May 2008).
- (1994): Energy dissipation behaviour of shear panels made of low yield steel. In: Earthquake Engineering and Structural Dynamics, v. 23, n. 12 (December 1994).
- (2011): Earthquake resilient steel braced frames with controlled rocking and energy dissipating fuses. In: Steel Construction, v. 4, n. 3 (August 2011).
- (2011): Buckling and Seismic Response of Grid Shell with Cylindrical Joints. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
- (2011): Effect of Yielding of Roof Members on Seismic Responses of Lattice Dome. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
Structurae cooperates with
