Raju Sharma 
- (2024): Effects of carbonation curing on chemical attack in cement paste incorporating liquid-crystal display glass powder as a partial binder replacement. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Influence of silica fume and lime on belite-rich cement paste subjected to atmospheric and autoclave CO2 curing regime. In: Construction and Building Materials, v. 436 (July 2024).
- (2024): Assessment of the physicochemical properties of alkali-activated slag blended with belite-rich cement subjected to carbonation attack. In: Construction and Building Materials, v. 424 (April 2024).
- (2023): Effects of curing regime, cement type, and water-to-cement ratio on the physicochemical, mechanical, and hydraulic properties of pervious mortar. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): Performance of eco-friendly concrete made from recycled waste tire fine aggregate as a replacement for river sand. In: Structures, v. 58 (December 2023).
- (2023): Influence of sillimanite sand and corundum sand on the mechanical property, durability and pore structure of cement mortar. In: Journal of Building Engineering, v. 80 (December 2023).
- (2023): Property assessment of an eco-friendly mortar reinforced with recycled mask fiber derived from COVID-19 single-use face masks. In: Journal of Building Engineering, v. 66 (May 2023).
- (2023): Effect of sillimanite sand on the mechanical property and thermal resistance of alkali-activated slag mortar. In: Construction and Building Materials, v. 370 (March 2023).
- (2022): Shaking table test of a half-scale three-story non-ductile RC building subjected to near-fault ground motions: Experimental and numerical modeling. In: Structures, v. 45 (November 2022).
- (2023): Dimensional stability of belite-rich cement subject to early carbonation curing. In: Journal of Building Engineering, v. 63 (January 2023).
- (2022): Experimental investigation of initially damaged beam column joint retrofitted with reinforced UHP-HFRC overlay. In: Journal of Building Engineering, v. 49 (May 2022).
- (2022): Use of carbonated Portland cement clinkers as a reactive or non-reactive aggregate for the production of cement mortar. In: Construction and Building Materials, v. 319 (February 2022).
- (2022): Effect of carbonation curing on physicochemical properties of mineral admixture blended belite-rich cement. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Enhancing the compressive strength of thermal energy storage concrete containing a low-temperature phase change material using silica fume and multiwalled carbon nanotubes. In: Construction and Building Materials, v. 314 (January 2022).
- (2022): A comprehensive review on effects of mineral admixtures and fibers on engineering properties of ultra-high-performance concrete. In: Journal of Building Engineering, v. 45 (January 2022).
- (2022): Effect of fine aggregate replacement with expanded perlite and pumice on the development of lightweight concrete. In: Australian Journal of Civil Engineering, v. 20, n. 1 (July 2022).
- (2021): Potential Use of Sillimanite Sand in Sustainable Geopolymer Concrete Production. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021).
- (2016): Retrofitting of RC girders using pre-stressed CFRP sheets. In: Steel and Composite Structures, v. 20, n. 4 ( 2016).
- (2019): Retrofitting of Shear-Deficient RC Beams Using UHP-FRC. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 43, n. 3 ( 2019).
- (2019): Behavior of RC exterior beam column joint retrofitted using UHP-HFRC. In: Construction and Building Materials, v. 195 (January 2019).
Structurae cooperates with
