- Performance of corroded RC beam–column joints repaired using a hybrid scheme with HSFRC and stirrups replacement. In: Structural Concrete. :
- Effects of carbonation curing on chemical attack in cement paste incorporating liquid-crystal display glass powder as a partial binder replacement. In: Case Studies in Construction Materials, v. 20 (Juli 2024). (2024):
- Influence of silica fume and lime on belite-rich cement paste subjected to atmospheric and autoclave CO2 curing regime. In: Construction and Building Materials, v. 436 (Juli 2024). (2024):
- Assessment of the physicochemical properties of alkali-activated slag blended with belite-rich cement subjected to carbonation attack. In: Construction and Building Materials, v. 424 (April 2024). (2024):
- Effects of curing regime, cement type, and water-to-cement ratio on the physicochemical, mechanical, and hydraulic properties of pervious mortar. In: Construction and Building Materials, v. 401 (Oktober 2023). (2023):
- Performance of eco-friendly concrete made from recycled waste tire fine aggregate as a replacement for river sand. In: Structures, v. 58 (Dezember 2023). (2023):
- Influence of sillimanite sand and corundum sand on the mechanical property, durability and pore structure of cement mortar. In: Journal of Building Engineering, v. 80 (Dezember 2023). (2023):
- Property assessment of an eco-friendly mortar reinforced with recycled mask fiber derived from COVID-19 single-use face masks. In: Journal of Building Engineering, v. 66 (Mai 2023). (2023):
- Effect of sillimanite sand on the mechanical property and thermal resistance of alkali-activated slag mortar. In: Construction and Building Materials, v. 370 (März 2023). (2023):
- Shaking table test of a half-scale three-story non-ductile RC building subjected to near-fault ground motions: Experimental and numerical modeling. In: Structures, v. 45 (November 2022). (2022):
- Dimensional stability of belite-rich cement subject to early carbonation curing. In: Journal of Building Engineering, v. 63 (Januar 2023). (2023):
- Experimental investigation of initially damaged beam column joint retrofitted with reinforced UHP-HFRC overlay. In: Journal of Building Engineering, v. 49 (Mai 2022). (2022):
- Use of carbonated Portland cement clinkers as a reactive or non-reactive aggregate for the production of cement mortar. In: Construction and Building Materials, v. 319 (Februar 2022). (2022):
- Effect of carbonation curing on physicochemical properties of mineral admixture blended belite-rich cement. In: Journal of Building Engineering, v. 56 (September 2022). (2022):
- Enhancing the compressive strength of thermal energy storage concrete containing a low-temperature phase change material using silica fume and multiwalled carbon nanotubes. In: Construction and Building Materials, v. 314 (Januar 2022). (2022):
- A comprehensive review on effects of mineral admixtures and fibers on engineering properties of ultra-high-performance concrete. In: Journal of Building Engineering, v. 45 (Januar 2022). (2022):
- Effect of fine aggregate replacement with expanded perlite and pumice on the development of lightweight concrete. In: Australian Journal of Civil Engineering, v. 20, n. 1 (Juli 2022). (2022):
- Potential Use of Sillimanite Sand in Sustainable Geopolymer Concrete Production. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021). (2021):
- Retrofitting of RC girders using pre-stressed CFRP sheets. In: Steel and Composite Structures, v. 20, n. 4 ( 2016). (2016):
- Retrofitting of Shear-Deficient RC Beams Using UHP-FRC. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 43, n. 3 ( 2019). (2019):
- Behavior of RC exterior beam column joint retrofitted using UHP-HFRC. In: Construction and Building Materials, v. 195 (Januar 2019). (2019):