Nasir Shafiq 
- (2021): Building-Information-Modelling-Based Thermal-Energy Performance Evaluation of Silica-Aerogel-Incorporated Rigid Board Roof Insulation Material for Residential Buildings in the Tropical Climate of Malaysia. In: IOP Conference Series: Earth and Environmental Science, v. 945, n. 1 (1 December 2021).
- (2021): Green-Building-Index-Assessment-Criteria-Based Comparative Evaluation of Interlocking Blocks as an Alternative to Conventional Masonry for Residential Buildings in Malaysia. In: IOP Conference Series: Earth and Environmental Science, v. 945, n. 1 (1 December 2021).
- (2024): Examining the impact of BIM implementation on external environment of AEC industry: A PEST analysis perspective. In: Developments in the Built Environment, v. 17 (March 2024).
- (2023): Enhancing the mechanical and environmental performance of engineered cementitious composite with metakaolin, silica fume, and graphene nanoplatelets. In: Construction and Building Materials, v. 404 (November 2023).
- (2024): Mechanical Properties and Numerical Design of Hybrid Damper of Steel Bar and Engine Mounting Rubber. In: Civil Engineering and Architecture, v. 12, n. 1 (January 2024).
- (2024): Low-Concentration Acid Treatment of Sugarcane Bagasse with Silica Extraction for Partial Cement Replacement. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 48, n. 3 (March 2024).
- (2023): Effects of Jute Fiber on Fresh and Hardened Characteristics of Concrete with Environmental Assessment. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2023): Optimization of Fresh and Mechanical Characteristics of Carbon Fiber-Reinforced Concrete Composites Using Response Surface Technique. In: Buildings, v. 13, n. 4 (24 March 2023).
- (2022): Effect of volcanic pumice powder ash on the properties of cement concrete using response surface methodology. In: Journal of Building Pathology and Rehabilitation, v. 8, n. 1 (26 October 2022).
- (2022): Behavioral assessment of graphene nanoplatelets reinforced concrete beams by experimental, statistical, and analytical methods. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2023): The behavior of graphene-nanoplatelets-based high-performance concrete under ambient curing. In: Structures, v. 47 (January 2023).
- (2022): Computational Aerodynamic Optimization of Wind-Sensitive Irregular Tall Buildings. In: Buildings, v. 12, n. 7 (5 July 2022).
- (2022): The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement. In: Construction and Building Materials, v. 339 (July 2022).
- (2018): Effects of sugarcane bagasse ash on the properties of concrete. In: Proceedings of the Institution of Civil Engineers - Engineering Sustainability, v. 171, n. 3 (May 2018).
- (2020): Investigating the effects of NaOH molarity and the geometry of PVA fibers on the post-cracking and the fracture behavior of engineered geopolymer composite. In: Construction and Building Materials, v. 265 (December 2020).
- (2016): Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. In: Composite Structures, v. 153 (October 2016).
- (2020): Physical and Mechanical Properties of Concrete with Locally Produced Metakaolin and Micro-silica as Supplementary Cementitious Material. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 44, n. 4 ( 2020).
- (2018): Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer. In: Construction and Building Materials, v. 181 (August 2018).
- (2018): Effective bond length of CFRP sheets externally bonded to concrete beams under marine environment. In: Construction and Building Materials, v. 167 (April 2018).
- (2015): Strength Prediction Models for PVA Fiber-Reinforced High-Strength Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 12 (December 2015).
- (2016): Compressive Stress-Strain Behavior of HSFRC Reinforced with Basalt Fibers. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 4 (April 2016).
- (2012): The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete. In: Construction and Building Materials, v. 36 (November 2012).
- (2013): Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete. In: Construction and Building Materials, v. 41 (April 2013).
- (2015): Calcined kaolin as cement replacing material and its use in high strength concrete. In: Construction and Building Materials, v. 81 (April 2015).
- (2014): FRP as strengthening material for Reinforced Concrete beams with openings — A review. In: KSCE Journal of Civil Engineering, v. 19, n. 1 (July 2014).
- (2011): Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system. In: KSCE Journal of Civil Engineering, v. 15, n. 7 (September 2011).
- (2011): Effect of mix composition on workability and compressive strength of self-compacting geopolymer concrete. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 38, n. 11 (November 2011).
- (2018): Flexural Modelling and Finite Element Analysis of FRC Beams Reinforced with PVA and Basalt Fibres and Their Validation. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete. In: Construction and Building Materials, v. 187 (October 2018).
- (2016): Behaviour of RC beams with CFRP-strengthened openings. In: Structural Concrete, v. 17, n. 1 (February 2016).
Structurae cooperates with
