0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Stanislav Seitl ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Doubek, Pavel / Kumpová, Ivana / Malikova, Lucie / Al Khazali, Mohammad Sami / Seitl, Stanislav (2024): Determination of the geometric parameters of the defects based on the tomographically obtained data and their influence on the fatigue behavior of the S960 with laser cladded protective layers. In: Frattura ed Integrità Strutturale, v. 19, n. 71 (8 October 2024).

    https://doi.org/10.3221/igf-esis.71.06

  2. Katzer, Jacek / Skoratko, Aneta / Seitl, Stanislav (2024): Properties of steel fiber reinforced mortar‐plastic columns with the cross‐section in a form of a Cesaro fractal. In: Structural Concrete, v. 25, n. 2 (January 2024).

    https://doi.org/10.1002/suco.202300146

  3. Ríos, José D. / Cifuentes, Héctor / Leiva, Carlos / Seitl, Stanislav (2019): Analysis of the mechanical and fracture behavior of heated ultra-high-performance fiber-reinforced concrete by X-ray computed tomography. In: Cement and Concrete Research, v. 119 (May 2019).

    https://doi.org/10.1016/j.cemconres.2019.02.015

  4. Bílek, Vlastimil / Soucek, Kamil / Khestl, Filip / Bujdos, David / Seitl, Stanislav (2023): Mechanical and Fracture Parameters of Concretes with Different Water to Cement Ratio in Two Different Conditions of Curing. In: Procedia Structural Integrity, v. 43 ( 2023).

    https://doi.org/10.1016/j.prostr.2022.12.243

  5. Miarka, Petr / Seitl, Stanislav / Klusak, Jan / Malikova, Lucie / Merta, Ildiko / Bílek, Vlastimil (2023): High-cycle fatigue cracks in concrete investigated by μCT tomography. In: Procedia Structural Integrity, v. 43 ( 2023).

    https://doi.org/10.1016/j.prostr.2022.12.246

  6. Seitl, Stanislav / Horník, Vít / Lesiuk, Grzegorz / Kunz, Ludvík (2023): Influence of Micro-structure of selected components made from AISI 304 on the mechanical properties. In: Procedia Structural Integrity, v. 43 ( 2023).

    https://doi.org/10.1016/j.prostr.2022.12.244

  7. Juhászová, Tereza / Miarka, Petr / Jindra, Daniel / Kala, Zdenek / Seitl, Stanislav (2023): Evaluation of Fatigue Crack Growth Rates in an IPE Beam Made of AISI 304 under Various Stress Ratios. In: Procedia Structural Integrity, v. 43 ( 2023).

    https://doi.org/10.1016/j.prostr.2022.12.254

  8. Klusak, Jan / Kozáková, Kamila / Jambor, Michal / Seitl, Stanislav (2023): Fatigue behavior of DIN 1.4307 and DIN 1.4306 stainless steels under high frequency loading. In: Procedia Structural Integrity, v. 43 ( 2023).

    https://doi.org/10.1016/j.prostr.2022.12.249

  9. Malikova, Lucie / Doubek, Pavel / Juhászová, Tereza / Krejsa, Martin / Seitl, Stanislav (2023): Fatigue crack propagation under corrosion of high-strength steel. In: Procedia Structural Integrity, v. 43 ( 2023).

    https://doi.org/10.1016/j.prostr.2022.12.269

  10. Doubek, Pavel / Malikova, Lucie / Miarka, Petr / Seitl, Stanislav (2023): Laser cladded protective layer on the S960 Change of microhardness in the vicinity of the bi-material interface. In: Procedia Structural Integrity, v. 43 ( 2023).

    https://doi.org/10.1016/j.prostr.2022.12.242

  11. Miarka, Petr / Seitl, Stanislav / Bílek, Vlastimil / Cifuentes, Héctor (2022): Assessment of fatigue resistance of concrete: S-N curves to the Paris’ law curves. In: Construction and Building Materials, v. 341 (July 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.127811

  12. Seitl, Stanislav / Bílek, Vlastimil / Keršner, Zbynĕk / Veselý, Jiří (2010): Cement based composites for thin building elements: Fracture and fatigue parameters. In: Procedia Engineering, v. 2, n. 1 (April 2010).

    https://doi.org/10.1016/j.proeng.2010.03.098

  13. Seitl, Stanislav / Miarka, Petr / Sobek, Jakub / Klusak, Jan (2017): A numerical investigation of the stress intensity factor for a bent chevron notched specimen: Comparison of 2D and 3D solutions. In: Procedia Structural Integrity, v. 5 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.07.164

  14. Krejsa, Martin / Seitl, Stanislav / Brozovsky, Jiri / Lehner, Petr (2017): Fatigue damage prediction of short edge crack under various load: Direct Optimized Probabilistic Calculation. In: Procedia Structural Integrity, v. 5 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.07.107

  15. Seitl, Stanislav / Miarka, Petr / Klusak, Jan / Kala, Zdenek / Krejsa, Martin / Blasón, Sergio / Canteli, Alfonso F. (2018): Evaluation of fatigue properties of S355 J0 steel using ProFatigue and ProPagation software. In: Procedia Structural Integrity, v. 13 ( 2018).

    https://doi.org/10.1016/j.prostr.2018.12.307

  16. Miarka, Petr / Seitl, Stanislav / Sucharda, Oldrich / Bílek, Vlastimil (2019): Fracture Resistance of Alkali Activated Concrete under the Mixed Mode I/II Load Conditions. In: Procedia Structural Integrity, v. 17 ( 2019).

    https://doi.org/10.1016/j.prostr.2019.08.082

  17. Malikova, Lucie / Miarka, Petr / Doubek, Pavel / Seitl, Stanislav (2021): Influence of the bi-material interface on the crack propagation through a thin protective layer. In: Procedia Structural Integrity, v. 33 ( 2021).

    https://doi.org/10.1016/j.prostr.2021.10.067

  18. Braet, Lucas / Juhászová, Tereza / Jindra, Daniel / Miarka, Petr / Seitl, Stanislav (2021): Finding the optimal stress state of a stainless-steel IPE profile for fatigue experiments. In: Procedia Structural Integrity, v. 33 ( 2021).

    https://doi.org/10.1016/j.prostr.2021.10.118

  19. Seitl, Stanislav / Andrade Lizarro, Julian Z. / Miarka, Petr (2021): Mixed Mode I/II Fracture Resistance of Various Civil Engineering Materials by Selected Criteria. In: Procedia Structural Integrity, v. 33 ( 2021).

    https://doi.org/10.1016/j.prostr.2021.10.038

  20. Malikova, Lucie / Doubek, Pavel / Miarka, Petr / Seitl, Stanislav (2021): Influence of the interphase between laser-cladded metal layer and steel substrate on fatigue propagation of a short edge crack. In: Frattura ed Integrità Strutturale, v. 16, n. 59 (22 December 2021).

    https://doi.org/10.3221/igf-esis.59.33

  21. Seitl, Stanislav / Miarka, Petr / Kala, Zdenek / Klusak, Jan (2017): Effect of rivet holes on calibration curves for edge cracks under various loading types in steel bridge structure. In: Procedia Structural Integrity, v. 5 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.07.046

  22. Seitl, Stanislav / Miarka, Petr / Šimonová, Hana / Frantík, Petr / Keršner, Zbynĕk / Domski, Jacek / Katzer, Jacek: Change of Fatigue and Mechanical Fracture Properties of a Cement Composite due to Partial Replacement of Aggregate by Red Ceramic Waste. In: Periodica Polytechnica Civil Engineering.

    https://doi.org/10.3311/ppci.12450

  23. Veselý, Václav / Sobek, Jakub / Šestáková, Lucie / Frantík, Petr / Seitl, Stanislav (2013): Multi-parameter crack tip stress state description for estimation of fracture process zone extent in silicate composite WST specimens. In: Frattura ed Integrità Strutturale, v. 7, n. 25 (April 2013).

    https://doi.org/10.3221/igf-esis.25.11

  24. Seitl, Stanislav / Miarka, Petr / Ruzicka, Vladimir / Malikova, Lucie / Cruces, Alejandro / Lopez Crespo, Pablo (2019): Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels. In: Frattura ed Integrità Strutturale, v. 13, n. 49 (June 2019).

    https://doi.org/10.3221/igf-esis.49.10

  25. De Corte, Wouter / Helincks, Peter / Boel, Veerle / Klusak, Jan / Seitl, Stanislav / De Schutter, Geert (2017): Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint. In: Frattura ed Integrità Strutturale, v. 11, n. 42 (September 2017).

    https://doi.org/10.3221/igf-esis.42.16

  26. Seitl, Stanislav / Ríos, José D. / Cifuentes, Héctor (2017): Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens. In: Frattura ed Integrità Strutturale, v. 11, n. 42 (September 2017).

    https://doi.org/10.3221/igf-esis.42.07

  27. Ruzicka, Vladimir / Malikova, Lucie / Seitl, Stanislav (2017): Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams’ expansion terms. In: Frattura ed Integrità Strutturale, v. 11, n. 42 (September 2017).

    https://doi.org/10.3221/igf-esis.42.14

  28. Seitl, Stanislav / Miarka, Petr (2017): Evaluation of mixed mode I/II fracture toughness of C 50/60 from Brazilian disc test. In: Frattura ed Integrità Strutturale, v. 11, n. 42 (September 2017).

    https://doi.org/10.3221/igf-esis.42.13

  29. Klon, Jiri / Seitl, Stanislav / Šimonová, Hana / Keršner, Zbynĕk / Kumpová, Ivana / Vavrik, Daniel (2017): Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography. In: Frattura ed Integrità Strutturale, v. 11, n. 42 (September 2017).

    https://doi.org/10.3221/igf-esis.42.17

  30. Cifuentes, Héctor / Lozano, Miguel / Holušová, Táňa / Medina, Fernando / Seitl, Stanislav / Fernández-Canteli, Alfonso (2017): Modified Disk-Shaped Compact Tension Test for Measuring Concrete Fracture Properties. In: International Journal of Concrete Structures and Materials, v. 11, n. 2 (June 2017).

    https://doi.org/10.1007/s40069-017-0189-4

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine