0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

B. W. Schafer ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Li, Z. / Hanna, M. T. / Ádány, S. / Schafer, B. W. (2011): Impact of basis, orthogonalization, and normalization on the constrained Finite Strip Method for stability solutions of open thin-walled members. In: Thin-Walled Structures, v. 49, n. 9 (September 2011).

    https://doi.org/10.1016/j.tws.2011.04.003

  2. Liu, H. / Igusa, T. / Schafer, B. W. (2004): Knowledge-based global optimization of cold-formed steel columns. In: Thin-Walled Structures, v. 42, n. 6 (June 2004).

    https://doi.org/10.1016/j.tws.2004.01.001

  3. Schafer, B. W. / Glauz, R. S. / Chen, H. (2023): Revision of ASCE 8 - Design of cold-formed stainless steel structural members. In: Journal of Constructional Steel Research, v. 208 (September 2023).

    https://doi.org/10.1016/j.jcsr.2023.107986

  4. Yuan, H. X. / Gao, J. D. / Theofanous, M. / Yang, L. / Schafer, B. W. (2020): Initial stiffness and plastic resistance of bolted stainless steel T-stubs in tension. In: Journal of Constructional Steel Research, v. 173 (October 2020).

    https://doi.org/10.1016/j.jcsr.2020.106239

  5. Moen, Cristopher D. / Igusa, Takeru / Schafer, B. W. (2008): Prediction of residual stresses and strains in cold-formed steel members. In: Thin-Walled Structures, v. 46, n. 11 (November 2008).

    https://doi.org/10.1016/j.tws.2008.02.002

  6. Vieira, L. C. M. / Malite, M. / Schafer, B. W. (2010): Simplified models for cross-section stress demands on C-section purlins in uplift. In: Thin-Walled Structures, v. 48, n. 1 (January 2010).

    https://doi.org/10.1016/j.tws.2009.07.009

  7. Zeinoddini, V. M. / Schafer, B. W. (2012): Simulation of geometric imperfections in cold-formed steel members using spectral representation approach. In: Thin-Walled Structures, v. 60 (November 2012).

    https://doi.org/10.1016/j.tws.2012.07.001

  8. Li, Z. / Ádány, S. / Schafer, B. W. (2013): Modal identification for shell finite element models of thin-walled members in nonlinear collapse analysis. In: Thin-Walled Structures, v. 67 (June 2013).

    https://doi.org/10.1016/j.tws.2013.01.019

  9. Amouzegar, H. / Schafer, B. W. / Tootkaboni, M. (2016): An incremental numerical method for calculation of residual stresses and strains in cold-formed steel members. In: Thin-Walled Structures, v. 106 (September 2016).

    https://doi.org/10.1016/j.tws.2016.03.019

  10. Schafer, B. W. / Graham-Brady, L. (2006): Stochastic Post-buckling of Frames Using Koiter's Method. In: International Journal of Structural Stability and Dynamics, v. 6, n. 3 (September 2006).

    https://doi.org/10.1142/s0219455406001976

  11. Ádány, Sándor / Schafer, B. W. (2008): A full modal decomposition of thin-walled, single-branched open cross-section members via the constrained finite strip method. In: Journal of Constructional Steel Research, v. 64, n. 1 (January 2008).

    https://doi.org/10.1016/j.jcsr.2007.04.004

  12. Schafer, B. W. (2008): Review: The Direct Strength Method of cold-formed steel member design. In: Journal of Constructional Steel Research, v. 64, n. 7-8 (July 2008).

    https://doi.org/10.1016/j.jcsr.2008.01.022

  13. Smith, B. H. / Szyniszewski, S. / Hajjar, J. F. / Schafer, B. W. / Arwade, S. R. (2012): Steel foam for structures: A review of applications, manufacturing and material properties. In: Journal of Constructional Steel Research, v. 71 (April 2012).

    https://doi.org/10.1016/j.jcsr.2011.10.028

  14. Peterman, K. D. / Nakata, N. / Schafer, B. W. (2014): Hysteretic characterization of cold-formed steel stud-to-sheathing connections. In: Journal of Constructional Steel Research, v. 101 (October 2014).

    https://doi.org/10.1016/j.jcsr.2014.05.019

  15. Liu, P. / Peterman, K. D. / Schafer, B. W. (2014): Impact of construction details on OSB-sheathed cold-formed steel framed shear walls. In: Journal of Constructional Steel Research, v. 101 (October 2014).

    https://doi.org/10.1016/j.jcsr.2014.05.003

  16. Mirzaei, A. / Sangree, R. H. / Velchev, K. / Comeau, G. / Balh, N. / Rogers, C. A. / Schafer, B. W. (2015): Seismic capacity-based design of narrow strap-braced cold-formed steel walls. In: Journal of Constructional Steel Research, v. 115 (December 2015).

    https://doi.org/10.1016/j.jcsr.2015.08.023

  17. Meimand, V. Z. / Schafer, B. W. (2014): Impact of load combinations on structural reliability determined from testing cold-formed steel components. In: Structural Safety, v. 48 (May 2014).

    https://doi.org/10.1016/j.strusafe.2013.10.006

  18. Schafer, B. W. / Bajpai, P. (2005): Stability degradation and redundancy in damaged structures. In: Engineering Structures, v. 27, n. 11 (September 2005).

    https://doi.org/10.1016/j.engstruct.2005.05.012

  19. Shama, A. A. / Zarghamee, M. S. / Ojdrovic, R. P. / Schafer, B. W. (2003): Seismic damage evaluation of a steel building using stress triaxiality. In: Engineering Structures, v. 25, n. 3 (February 2003).

    https://doi.org/10.1016/s0141-0296(02)00149-9

  20. Schafer, B. W. / Peköz, T. (1999): Laterally Braced Cold-Formed Steel Flexural Members with Edge Stiffened Flanges. In: Journal of Structural Engineering (ASCE), v. 125, n. 2 (February 1999).

    https://doi.org/10.1061/(asce)0733-9445(1999)125:2(118)

  21. Peterman, K. D. / Schafer, B. W. (2014): Sheathed Cold-Formed Steel Studs under Axial and Lateral Load. In: Journal of Structural Engineering (ASCE), v. 140, n. 10 (October 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0000966

  22. Schafer, B. W. / Ojdrovic, R. P. / Zarghamee, M. S. (2000): Triaxiality and Fracture of Steel Moment Connections. In: Journal of Structural Engineering (ASCE), v. 126, n. 10 (October 2000).

    https://doi.org/10.1061/(asce)0733-9445(2000)126:10(1131)

  23. Bian, G. / Chatterjee, A. / Buonopane, S. G. / Arwade, S. R. / Moen, C. D. / Schafer, B. W. (2017): Reliability of cold-formed steel framed shear walls as impacted by variability in fastener response. In: Engineering Structures, v. 142 (July 2017).

    https://doi.org/10.1016/j.engstruct.2017.03.072

  24. Blum, H. B. / Meimand, V. Z. / Schafer, B. W. (2015): Flexural Bracing Requirements in Axially Loaded Cold-Formed Steel-Framed Walls. In: Practice Periodical on Structural Design and Construction, v. 20, n. 4 (November 2015).

    https://doi.org/10.1061/(asce)sc.1943-5576.0000242

  25. Schafer, B. W. (2002): Local, Distortional, and Euler Buckling of Thin-Walled Columns. In: Journal of Structural Engineering (ASCE), v. 128, n. 3 (March 2002).

    https://doi.org/10.1061/(asce)0733-9445(2002)128:3(289)

  26. Schafer, B. W. (2002): Three Books for Cold-Formed Steel Design. In: Journal of Structural Engineering (ASCE), v. 128, n. 11 (November 2002).

    https://doi.org/10.1061/(asce)0733-9445(2002)128:11(1490)

  27. Shifferaw, Yared / Schafer, B. W. (2012): Inelastic Bending Capacity of Cold-Formed Steel Members. In: Journal of Structural Engineering (ASCE), v. 138, n. 4 (April 2012).

    https://doi.org/10.1061/(asce)st.1943-541x.0000469

  28. Buonopane, S. G. / Schafer, B. W. (2006): Reliability of Steel Frames Designed with Advanced Analysis. In: Journal of Structural Engineering (ASCE), v. 132, n. 2 (February 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:2(267)

  29. Schafer, B. W. / Ayhan, D. / Leng, J. / Liu, P. / Padilla-Llano, D. / Peterman, K. D. / Stehman, M. / Buonopane, S. G. / Eatherton, M. / Madsen, R. / Manley, B. / Moen, C. D. / Nakata, N. / Rogers, C. / Yu, C. (2016): Seismic Response and Engineering of Cold-formed Steel Framed Buildings. In: Structures, v. 8 (November 2016).

    https://doi.org/10.1016/j.istruc.2016.05.009

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine