0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

B. W. Schafer ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Abbasi, M. / Khezri, M. / Rasmussen, K. J. R. / Schafer, B. W. (2018): Elastic buckling analysis of cold-formed steel built-up sections with discrete fasteners using the compound strip method. In: Thin-Walled Structures, v. 124 (März 2018).

    https://doi.org/10.1016/j.tws.2017.11.046

  2. Moen, Cristopher D. / Schafer, B. W. (2009): Elastic buckling of thin plates with holes in compression or bending. In: Thin-Walled Structures, v. 47, n. 12 (Dezember 2009).

    https://doi.org/10.1016/j.tws.2009.05.001

  3. Rahnavard, R. / Craveiro, H. D. / Simões, R. A. / Torabian, S. / Schafer, B. W. (2024): Concrete-filled Cold-formed Steel Built-up Composite Stub Columns. In: ce/papers, v. 7, n. 1-2 (März 2024).

    https://doi.org/10.1002/cepa.3038

  4. Avellaneda-Ramirez, R. E. / Eatherton, M. R. / Easterling, W. S. / Schafer, B. W. / Hajjar, J. F. (2024): Experimental Program on Behavior of Concrete-Filled Steel Deck Composite Diaphragms. In: Journal of Structural Engineering (ASCE), v. 150, n. 2 (Februar 2024).

    https://doi.org/10.1061/jsendh.steng-12556

  5. Zhang, Z. / Singh, A. / Derveni, F. / Torabian, S. / Peterman, K. D. / Hutchinson, T. C. / Schafer, B. W. (2022): Cyclic Experiments on Steel Sheet Connections for Standard CFS Framed Steel Sheet Sheathed Shear Walls. In: Journal of Structural Engineering (ASCE), v. 148, n. 2 (Februar 2022).

    https://doi.org/10.1061/(asce)st.1943-541x.0003233

  6. Torabian, S. / Schafer, B. W. (2021): Cyclic Experiments on Sidelap and Structural Connectors in Steel Deck Diaphragms. In: Journal of Structural Engineering (ASCE), v. 147, n. 4 (April 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002981

  7. Foroughi, H. / Ji, C. / Moen, C. D. / Schafer, B. W. (2020): Experimental determination of stiffness and strength for metal building system rod bracing. In: Journal of Constructional Steel Research, v. 171 (August 2020).

    https://doi.org/10.1016/j.jcsr.2020.106149

  8. Chen, X. W. / Yuan, H. X. / Real, E. / Du, X. X. / Schafer, B. W. (2020): Experimental behaviour of stainless steel plate girders under combined bending and shear. In: Journal of Constructional Steel Research, v. 166 (März 2020).

    https://doi.org/10.1016/j.jcsr.2019.105900

  9. Ádány, S. / Schafer, B. W. (2006): Buckling mode decomposition of single-branched open cross-section members via finite strip method: Derivation. In: Thin-Walled Structures, v. 44, n. 5 (Mai 2006).

    https://doi.org/10.1016/j.tws.2006.03.013

  10. Ádány, S. / Schafer, B. W. (2006): Buckling mode decomposition of single-branched open cross-section members via finite strip method: Application and examples. In: Thin-Walled Structures, v. 44, n. 5 (Mai 2006).

    https://doi.org/10.1016/j.tws.2006.03.014

  11. Moen, Cristopher D. / Schafer, B. W. (2008): Experiments on cold-formed steel columns with holes. In: Thin-Walled Structures, v. 46, n. 10 (Oktober 2008).

    https://doi.org/10.1016/j.tws.2008.01.021

  12. Schafer, B. W. / Li, Z. / Moen, C. D. (2010): Computational modeling of cold-formed steel. In: Thin-Walled Structures, v. 48, n. 10-11 (Oktober 2010).

    https://doi.org/10.1016/j.tws.2010.04.008

  13. Shifferaw, Y. / Schafer, B. W. (2014): Cold-formed steel lipped and plain angle columns with fixed ends. In: Thin-Walled Structures, v. 80 (Juli 2014).

    https://doi.org/10.1016/j.tws.2014.03.001

  14. Li, Z. / Schafer, B. W. (2013): Constrained Finite Strip Method for Thin-Walled Members with General End Boundary Conditions. In: Journal of Engineering Mechanics (ASCE), v. 139, n. 11 (November 2013).

    https://doi.org/10.1061/(asce)em.1943-7889.0000591

  15. Yuan, H. X. / Du, X. X. / Shokouhian, M. / Ye, J. / Schafer, B. W. (2019): Behaviour and design of circular hollow section steel columns strengthened by infilling concrete under preload. In: Journal of Constructional Steel Research, v. 159 (August 2019).

    https://doi.org/10.1016/j.jcsr.2019.05.001

  16. Schafer, B. W. / Peköz, T. (1998): Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses. In: Journal of Constructional Steel Research, v. 47, n. 3 (September 1998).

    https://doi.org/10.1016/s0143-974x(98)00007-8

  17. Li, Z. / Schafer, B. W. (2010): Application of the finite strip method in cold-formed steel member design. In: Journal of Constructional Steel Research, v. 66, n. 8-9 (August 2010).

    https://doi.org/10.1016/j.jcsr.2010.04.001

  18. Vieira, L. C. M. / Shifferaw, Yared / Schafer, B. W. (2011): Experiments on sheathed cold-formed steel studs in compression. In: Journal of Constructional Steel Research, v. 67, n. 10 (Oktober 2011).

    https://doi.org/10.1016/j.jcsr.2011.03.029

  19. Buonopane, S. G. / Bian, G. / Tun, T. H. / Schafer, B. W. (2015): Computationally efficient fastener-based models of cold-formed steel shear walls with wood sheathing. In: Journal of Constructional Steel Research, v. 110 (Juli 2015).

    https://doi.org/10.1016/j.jcsr.2015.03.008

  20. Maia, W. F. / Vieira, L. C. M. / Schafer, B. W. / Malite, M. (2016): Experimental and numerical investigation of cold-formed steel double angle members under compression. In: Journal of Constructional Steel Research, v. 121 (Juni 2016).

    https://doi.org/10.1016/j.jcsr.2016.03.003

  21. Ayhan, D. / Schafer, B. W. (2019): Cold-formed steel ledger-framed construction floor-to-wall connection behavior and strength. In: Journal of Constructional Steel Research, v. 156 (Mai 2019).

    https://doi.org/10.1016/j.jcsr.2019.01.021

  22. Sangree, R. H. / Schafer, B. W. (2009): Experimental and numerical analysis of a stop-splayed traditional timber scarf joint with key. In: Construction and Building Materials, v. 23, n. 1 (Januar 2009).

    https://doi.org/10.1016/j.conbuildmat.2007.11.004

  23. Sangree, R. H. / Schafer, B. W. (2009): Experimental and numerical analysis of a halved and tabled traditional timber scarf joint. In: Construction and Building Materials, v. 23, n. 2 (Februar 2009).

    https://doi.org/10.1016/j.conbuildmat.2008.01.015

  24. Moen, Cristopher D. / Schafer, B. W. (2009): Elastic buckling of cold-formed steel columns and beams with holes. In: Engineering Structures, v. 31, n. 12 (Dezember 2009).

    https://doi.org/10.1016/j.engstruct.2009.07.007

  25. Smith, B. H. / Arwade, S. R. / Schafer, B. W. / Moen, C. D. (2016): Design component and system reliability in a low-rise cold formed steel framed commercial building. In: Engineering Structures, v. 127 (November 2016).

    https://doi.org/10.1016/j.engstruct.2016.08.049

  26. Schafer, B. W. / Peköz, T. (1998): Cold-Formed Steel Members with Multiple Longitudinal Intermediate Stiffeners. In: Journal of Structural Engineering (ASCE), v. 124, n. 10 (Oktober 1998).

    https://doi.org/10.1061/(asce)0733-9445(1998)124:10(1175)

  27. Moen, C. D. / Schafer, B. W. (2011): Direct Strength Method for Design of Cold-Formed Steel Columns with Holes. In: Journal of Structural Engineering (ASCE), v. 137, n. 5 (Mai 2011).

    https://doi.org/10.1061/(asce)st.1943-541x.0000310

  28. Schafer, B. W. / Sarawit, A. / Peköz, T. (2006): Complex Edge Stiffeners for Thin-Walled Members. In: Journal of Structural Engineering (ASCE), v. 132, n. 2 (Februar 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:2(212)

  29. Vieira, L. C. M. / Schafer, B. W. (2013): Behavior and Design of Sheathed Cold-Formed Steel Stud Walls under Compression. In: Journal of Structural Engineering (ASCE), v. 139, n. 5 (Mai 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000731

  30. Sangree, R. H. / Schafer, B. W. (2008): Field Experiments and Numerical Models for the Condition Assessment of Historic Timber Bridges: Case Study. In: Journal of Bridge Engineering (ASCE), v. 13, n. 6 (November 2008).

    https://doi.org/10.1061/(asce)1084-0702(2008)13:6(595)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine