Branko Savija 
- (2024): A comprehensive review of fatigue of cementitious materials: Characterisation, modelling and mechanisms. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): Elevating mechanical performance of cementitious composites with surface-modified 3D-Printed polymeric reinforcements. In: Developments in the Built Environment, v. 19 (October 2024).
- : Experimentally informed modeling of the early‐age stress evolution in cementitious materials using exponential conversion from creep to relaxation. In: Computer-Aided Civil and Infrastructure Engineering.
- (2024): Autogenous deformation-induced stress evolution in cementitious materials considering viscoelastic properties: A review of experiments and models. In: Developments in the Built Environment, v. 17 (March 2024).
- (2023): Effect of white mud on properties of alkali activated slag. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Effect of particle size distribution on the pre-hydration, hydration kinetics, and mechanical properties of calcium sulfoaluminate cement. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing?. In: Construction and Building Materials, v. 371 (March 2023).
- (2024): Effects of temperature on autogenous deformation and early-age stress evolution in cement pastes with low water to cement ratio. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Automatic enhancement of vascular configuration for self-healing concrete through reinforcement learning approach. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Auxetic cementitious cellular composite (ACCC) PVDF-based energy harvester. In: Energy and Buildings, v. 298 (November 2023).
- (2023): Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites. In: Buildings, v. 13, n. 10 (10 October 2023).
- (2023): 3D auxetic cementitious-polymeric composite structure with compressive strain-hardening behavior. In: Engineering Structures, v. 294 (November 2023).
- (2019): Combined experimental and numerical study of uniaxial compression failure of hardened cement paste at micrometre length scale. In: Cement and Concrete Research, v. 126 (December 2019).
- (2017): Experimentally validated multi-scale modelling scheme of deformation and fracture of cement paste. In: Cement and Concrete Research, v. 102 (December 2017).
- (2023): Autogenous deformation induced- stress evolution in high-volume GGBFS concrete: Macro-scale behavior and micro-scale origin. In: Construction and Building Materials, v. 370 (March 2023).
- (2022): Effect of crack width and wet-dry cycles on the chloride penetration resistance of engineered cementitious composite (ECC). In: Construction and Building Materials, v. 352 (October 2022).
- (2022): Design and analyses of printable strain hardening cementitious composites with optimized particle size distribution. In: Construction and Building Materials, v. 324 (March 2022).
- (2022): Effect of curing methods during a long time gap between two printing sessions on the interlayer bonding of 3D printed cementitious materials. In: Construction and Building Materials, v. 332 (May 2022).
- (2021): Early-age properties of alkali-activated slag and glass wool paste. In: Construction and Building Materials, v. 291 (July 2021).
- (2021): Engineering of green cementitious composites modified with siliceous fly ash: Understanding the importance of curing conditions. In: Construction and Building Materials, v. 313 (December 2021).
- (2021): The effect of furnace steel slag powder on the performance of cementitious mortar at ambient temperature and after exposure to elevated temperatures. In: Structures, v. 33 (October 2021).
- (2021): A discrete lattice model for assessment of buildability performance of 3D‐printed concrete. In: Computer-Aided Civil and Infrastructure Engineering, v. 36, n. 5 (May 2021).
- (2020): Discrete lattice fracture modelling of hydrated cement paste under uniaxial compression at micro-scale. In: Construction and Building Materials, v. 263 (December 2020).
- (2018): Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes. In: Construction and Building Materials, v. 161 (February 2018).
- (2019): Assessing Hydrated Cement Paste Properties Using Experimentally Informed Discrete Models. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 9 (September 2019).
- (2013): Cracking of the concrete cover due to reinforcement corrosion: A two-dimensional lattice model study. In: Construction and Building Materials, v. 44 (July 2013).
- (2014): Assessment of cracks in reinforced concrete by means of electrical resistance and image analysis. In: Construction and Building Materials, v. 65 (August 2014).
- (2016): Carbonation of cement paste: Understanding, challenges, and opportunities. In: Construction and Building Materials, v. 117 (August 2016).
- (2014): Chloride ingress in cracked concrete: a laser induced breakdown spectroscopy (LIBS) study. In: Journal of Advanced Concrete Technology, v. 12, n. 10 ( 2014).
- (2015): Corrosion induced cover cracking studied by X-ray computed tomography, nanoindentation, and energy dispersive X-ray spectrometry (EDS). In: Materials and Structures, v. 48, n. 7 (July 2015).
Structurae cooperates with
