Jay Sanjayan 
- (2024): Printhead mixing of geopolymer and OPC slurries for hybrid alkali-activated cement in 3D concrete printing. In: Construction and Building Materials, v. 430 (June 2024).
- (2023): Pore structure profile of ambient temperature-cured geopolymer concrete and its effect on engineering properties. In: Construction and Building Materials, v. 406 (November 2023).
- (2024): Quick nozzle mixing technology for 3D printing foam concrete. In: Journal of Building Engineering, v. 83 (April 2024).
- (2023): Rapid early age strength development of in-line activated geopolymer for concrete 3D printing. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Shrinkage model for waste clay brick-based geopolymer concrete. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Tensile performance of cast-in headed studs in thin concrete panels with void formers. In: Construction and Building Materials, v. 402 (October 2023).
- (2017): Specimens size, aggregate size, and aggregate type effect on spalling of concrete in fire. In: Fire and Materials, v. 42, n. 1 (August 2017).
- (2022): Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison. In: Buildings, v. 12, n. 8 (31 July 2022).
- (2022): Understanding and eliminating of expansion caused by recycled glass fiber reinforced plastic powder in concrete. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Synthesis and performance of intumescent alkali-activated rice husk ash for fire-resistant applications. In: Journal of Building Engineering, v. 51 (July 2022).
- (2021): Synthesis and properties of thermally enhanced aerated geopolymer concrete using form-stable phase change composite. In: Journal of Building Engineering, v. 40 (August 2021).
- (2021): Reinforcement method for 3D concrete printing using paste-coated bar penetrations. In: Automation in Construction, v. 127 (July 2021).
- (2018): Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets. In: Energy and Buildings, v. 169 (June 2018).
- (2018): Review of 10 years research on building energy performance gap: Life-cycle and stakeholder perspectives. In: Energy and Buildings, v. 178 (November 2018).
- (2020): Strength and ductility enhancement of 3D printing structure reinforced by embedding continuous micro-cables. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance. In: Construction and Building Materials, v. 250 (July 2020).
- (2009): Residual compressive behavior of alkali-activated concrete exposed to elevated temperatures. In: Fire and Materials, v. 33, n. 1 (January 2009).
- (2019): Performance of NSM FRP embedded in concrete under monotonic and fatigue loads: state-of-the-art review. In: Australian Journal of Structural Engineering, v. 20, n. 3 (June 2019).
- (2019): Thermal Performance of Hollow-Core Slab Ventilation System with Macro-Encapsulated Phase-Change Materials in Supply Air Duct. In: Buildings, v. 9, n. 2 (February 2019).
- (2019): Stress-strain relationship of cement mortar under triaxial compression. In: Construction and Building Materials, v. 220 (September 2019).
- (2019): A state-of-the-art review: Near-surface mounted FRP composites for reinforced concrete structures. In: Construction and Building Materials, v. 209 (June 2019).
- (2019): Printability, accuracy and strength of geopolymer made using powder-based 3D printing for construction applications. In: Automation in Construction, v. 101 (May 2019).
- (2015): Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 10 (October 2015).
- (2016): Strength Development and Microfabric Structure of Construction and Demolition Aggregates Stabilized with Fly Ash–Based Geopolymers. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 11 (November 2016).
- (2008): Unsaturated Capillary Flow within Alkali Activated Slag Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 9 (September 2008).
- (2016): Stabilization of Demolition Materials for Pavement Base/Subbase Applications Using Fly Ash and Slag Geopolymers: Laboratory Investigation. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 7 (July 2016).
- (2017): Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. In: Construction and Building Materials, v. 137 (April 2017).
- (2010): Residual strength properties of sodium silicate alkali activated slag paste exposed to elevated temperatures. In: Materials and Structures, v. 43, n. 6 (July 2010).
- (2008): Phase transformations and mechanical strength of OPC/Slag pastes submitted to high temperatures. In: Materials and Structures, v. 41, n. 2 (March 2008).
Structurae cooperates with
