Jay Sanjayan 
- (2024): Enhancing interlayer bonding strength of 3D printed ternary geopolymer using calcium carbonate whiskers spray. In: Construction and Building Materials, v. 435 (July 2024).
- : Encapsulation of sodium silicate to attain on demand buildability enhancement in concrete 3D printing. In: Journal of Building Engineering.
- (2024): Bond-slip behaviour of textile-reinforcement in 3D printed concrete. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Bond Performance of Reinforcing Bars in Thin Concrete Panels with the Presence of Innovative Void Formers Under Tensile Loading. In: International Journal of Civil Engineering, v. 22, n. 4 (November 2023).
- (2023): Development of lightweight alkali-activated composites incorporating cenopsheres: Exhibiting high strength/density ratio and low thermal conductivity. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): The ambient and elevated temperature performance of hemp fibre reinforced alkali-activated cement foam: Effects of fibre dosage and alkali treatment. In: Journal of Building Engineering, v. 76 (October 2023).
- (2012): Damping and microstructure of fly ash-based geopolymers. In: Journal of Materials Science, v. 48, n. 8 (December 2012).
- (2023): Considerations and recommendations for improving the curved concrete fabrication using pin and bed method. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Effect of Magnetorheological additives on the buildability of 3D concrete printing. In: Journal of Building Engineering, v. 74 (September 2023).
- (2020): Effect of yield stress development on the foam-stability of aerated geopolymer concrete. In: Cement and Concrete Research, v. 138 (December 2020).
- (2020): Aggregate-bed 3D concrete printing with cement paste binder. In: Cement and Concrete Research, v. 136 (October 2020).
- (2017): Durability of low‑calcium fly ash based geopolymer concrete culvert in a saline environment. In: Cement and Concrete Research, v. 100 (October 2017).
- (2023): Applications of natural and synthetic fiber reinforced polymer in infrastructure: A suitability assessment. In: Journal of Building Engineering, v. 66 (May 2023).
- (2023): Comparative analysis of form-stable phase change material integrated concrete panels for building envelopes. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): An energy-efficient form-stable phase change materials synthesis method to enhance thermal storage and prevent acidification of cementitious composite. In: Construction and Building Materials, v. 348 (September 2022).
- (2022): Enhancing the chemical foaming process using superplasticizer in aerated geopolymer concrete. In: Construction and Building Materials, v. 324 (March 2022).
- (2021): Durability performance of fly ash-based geopolymer concrete buried in saline environment for 10 years. In: Construction and Building Materials, v. 281 (April 2021).
- (2021): The effect of chloride ingress in reinforced geopolymer concrete exposed in the marine environment. In: Journal of Building Engineering, v. 39 (July 2021).
- (2021): Effect of fly ash and slag on properties of normal and high strength concrete including fracture energy by wedge splitting test: Experimental and numerical investigations. In: Construction and Building Materials, v. 271 (February 2021).
- (2020): Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing. In: Construction and Building Materials, v. 265 (December 2020).
- (2014): Energy saving potential of phase change materials in major Australian cities. In: Energy and Buildings, v. 78 (August 2014).
- (2020): Bond properties of reinforcing bar penetrations in 3D concrete printing. In: Automation in Construction, v. 120 (December 2020).
- (2020): Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction. In: Construction and Building Materials, v. 257 (October 2020).
- (2020): Dimensional accuracy, flowability, wettability, and porosity in inkjet 3DP for gypsum and cement mortar materials. In: Automation in Construction, v. 110 (February 2020).
- (2014): Comparative deflection hardening behavior of short fiber reinforced geopolymer composites. In: Construction and Building Materials, v. 70 (November 2014).
- (2014): Effects of mineral admixtures and lime on disintegration of alkali-activated slag exposed to 50°C. In: Construction and Building Materials, v. 70 (November 2014).
- (2015): Effects of chitosan treatment on strength and thickening properties of oil well cement. In: Construction and Building Materials, v. 75 (January 2015).
- (2016): Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8years. In: Construction and Building Materials, v. 125 (October 2016).
- (2018): Durability Performance of Precast Fly Ash–Based Geopolymer Concrete under Atmospheric Exposure Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 3 (March 2018).
- (2017): Effect of Aggregate Size on the Spalling of High-Strength Wall Panels Exposed to Hydrocarbon Fire. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 12 (December 2017).
Structurae cooperates with
