Miguel Fernández Ruiz 
- (2025): Performance of nodal regions of reinforced concrete frame corners subjected to opening bending moments. In: Engineering Structures, v. 322 (January 2025).
- : A review of punching behavior of slab–column connections with recycled coarse aggregate concrete. In: Structural Concrete.
- (2024): Punching shear in flat slabs with re-entrant corner columns and shear reinforcement. In: Engineering Structures, v. 310 (July 2024).
- (2024): Macrosynthetic fibers as replacement of conventional steel reinforcement for concrete of partition walls. In: Structural Concrete, v. 25, n. 2 (January 2024).
- (2024): Shear resistance of prestressed HPFRC beams without stirrups: A mechanical analysis of shear-transfer actions based on detailed experimental measurements. In: Engineering Structures, v. 306 (May 2024).
- (2024): Punching shear tests in flat slabs supported on re-entrant corner columns. In: Engineering Structures, v. 308 (June 2024).
- (2024): Punching performance of flat slabs with openings accounting for the influence of moment transfer and shear reinforcement. In: Engineering Structures, v. 303 (March 2024).
- (2023): Rethinking databases: The fib project for a connected data repository. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- (2023): Reliability‐ and sustainability‐driven strategies for the maintenance of existing structures. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- : A mechanical approach for the punching shear provisions in the second generation of Eurocode 2. In: Hormigón y acero.
- (2021): Shear force redistributions and resistance of slabs and wide beams. In: Structural Concrete, v. 22, n. 4 (June 2021).
- (2021): Spalling of concrete cover induced by reinforcement. In: Engineering Structures, v. 237 (June 2021).
- (2011): Réaliser une canopée. In: Tracés, v. 137, n. 9 (18 May 2011).
- (2020): Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields. In: Engineering Structures, v. 215 (July 2020).
- (2020): Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack. In: ACI Structural Journal, v. 117, n. 1 (January 2020).
- (2016): Punching Shear Capacity of Continuous Slabs. In: ACI Structural Journal, v. 113, n. 4 (July 2016).
- (2014): Shear Strength of Arch-Shaped Members without Transverse Reinforcement. In: ACI Structural Journal, v. 111, n. 3 (May 2014).
- (2014): On the efficiency of flat slabs strengthening against punching using externally bonded fibre reinforced polymers. In: Construction and Building Materials, v. 73 (December 2014).
- (2007): Relationship between Nonlinear Creep and Cracking of Concrete under Uniaxial Compression. In: Journal of Advanced Concrete Technology, v. 5, n. 3 ( 2007).
- (2018): Measurements of internal cracking in punching test slabs without shear reinforcement. In: Magazine of Concrete Research, v. 70, n. 15 (August 2018).
- (2018): Response of RC panels accounting for crack development and its interaction with rebars. In: Magazine of Concrete Research, v. 70, n. 8 (April 2018).
- (2011): Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement. In: Magazine of Concrete Research, v. 63, n. 6 (June 2011).
- (2013): Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges. In: Engineering Structures, v. 56 (November 2013).
- (2014): Shear strength of RC slabs under concentrated loads near clamped linear supports. In: Engineering Structures, v. 76 (October 2014).
- (2015): Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results. In: Engineering Structures, v. 103 (November 2015).
- (2018): A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack. In: Engineering Structures, v. 157 (February 2018).
- (2016): Punching shear tests on compact footings with uniform soil pressure. In: Structural Concrete, v. 17, n. 4 (August 2016).
- (2018): Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures. In: Structural Concrete, v. 19, n. 1 (February 2018).
- (2012): Levels-of-Approximation Approach in Codes of Practice. In: Structural Engineering International, v. 22, n. 2 (May 2012).
- (2012): The levels-of-approximation approach in MC 2010: application to punching shear provisions. In: Structural Concrete, v. 13, n. 1 (March 2012).
Structurae cooperates with
