Miguel Fernández Ruiz 
- (2023): Design and assessment of concrete structures with strut‐and‐tie models and stress fields: From simple calculations to detailed numerical analysis. Dans: Structural Concrete, v. 24, n. 3 (avril 2023).
- (2023): Influence of amount of shear reinforcement and its post‐yield response on the shear resistance of reinforced concrete members. Dans: Structural Concrete, v. 24, n. 1 (février 2023).
- (2023): Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression. Dans: Structural Concrete, v. 24, n. 3 (avril 2023).
- (2023): Design of slender and squat reinforced concrete members with shear reinforcement. Dans: Structural Concrete, v. 24, n. 1 (février 2023).
- (2021): Design and assessment with strut-and-tie models and stress fields: from simple calculations to detailed numerical analysis.. fédération internationale du béton (fib), Lausanne (Suisse), ISBN 978-2-88394-151-9.
- (2022): Anchorage of shear reinforcement in beams and slabs. Dans: Engineering Structures, v. 265 (août 2022).
- (2022): Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes. Dans: Engineering Structures, v. 264 (août 2022).
- (2022): Characterization of shear deformations in reinforced concrete members without shear reinforcement. Dans: Engineering Structures, v. 257 (avril 2022).
- (2021): A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures. Dans: Engineering Structures, v. 249 (décembre 2021).
- (2021): Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement. Dans: Engineering Structures, v. 245 (octobre 2021).
- (2021): Casting position effects on bond performance of reinforcement bars. Dans: Structural Concrete, v. 22, n. 3 (avril 2021).
- (2011): Crushing and flexural strength of slab–column joints. Dans: Engineering Structures, v. 33, n. 3 (mars 2011).
- (2021): The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete. Dans: Engineering Structures, v. 231 (mars 2021).
- (2007): Champs de contraintes pour le béton structural. Dans: Tracés, v. 133, n. 5 (21 mars 2007).
- (2021): A detailed view on the rebar–to–concrete interaction based on refined measurement techniques. Dans: Engineering Structures, v. 226 (janvier 2021).
- (2020): Influence of cracking and rough surface properties on the transfer of forces in cracked concrete. Dans: Engineering Structures, v. 225 (décembre 2020).
- (2021): Concrete compressive strength: From material characterization to a structural value. Dans: Structural Concrete, v. 22 (janvier 2021).
- (2021): The influence of casting position and disturbance induced by reinforcement on the structural concrete strength. Dans: Structural Concrete, v. 22 (janvier 2021).
- (2019): Enhancing Punching Strength and Deformation Capacity of Flat Slabs. Dans: ACI Structural Journal, v. 116, n. 5 (septembre 2019).
- (2019): From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design. Dans: Structural Concrete, v. 20, n. 4 (août 2019).
- (2019): Assessing the compressive strength of concrete under sustained actions: From refined models to simple design expressions. Dans: Structural Concrete, v. 20, n. 3 (juin 2019).
- (2015): Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement. Dans: Journal of Advanced Concrete Technology, v. 13, n. 5 ( 2015).
- (2018): Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates. Dans: Journal of Advanced Concrete Technology, v. 16, n. 8 (août 2018).
- (2013): Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics. Dans: Magazine of Concrete Research, v. 65, n. 6 (mars 2013).
- (2013): Behaviour of nodal regions of reinforced concrete frames subjected to opening moments and proposals for their reinforcement. Dans: Engineering Structures, v. 51 (juin 2013).
- (2015): Influence of moment redistribution and compressive membrane action on punching strength of flat slabs. Dans: Engineering Structures, v. 86 (mars 2015).
- (2014): Influence of prestressing on the punching strength of post-tensioned slabs. Dans: Engineering Structures, v. 72 (août 2014).
- (2015): Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads. Dans: Engineering Structures, v. 89 (avril 2015).
- (2018): analysis of the shear-transfer actions in reinforced concrete members without transverse reinforcement based on refined experimental measurements. Dans: Structural Concrete, v. 19, n. 1 (février 2018).
- (2017): Influence of flanges on the shear-carrying capacity of reinforced concrete beams without web reinforcement. Dans: Structural Concrete, v. 18, n. 5 (octobre 2017).
Structurae coopère avec
