0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

J. Michael Rotter

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Sadowski, Adam J. / Morata, Maria Terres / Kathirkamanathan, Lijithan / Seidel, Marc / Rotter, J. Michael (2023): On the existing test dataset of isotropic cylindrical metal shells under axial compression and the design of modern metal civil engineering shells. In: Structural Safety, v. 102 (May 2023).

    https://doi.org/10.1016/j.strusafe.2022.102285

  2. Zeybek, Özer / Topkaya, Cem / Rotter, J. Michael (2021): Stability of Open‐Top Cylindrical Steel Tanks with Primary Stiffening Ring under Wind Loading. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1486

  3. Rotter, J. Michael (1982): Multiple Column Curves by Modifying Factors. In: Journal of the Structural Division (ASCE), v. 108, n. 7 (July 1982).

    https://doi.org/10.1061/jsdeag.0005998

  4. Ding, Xiaoli / Coleman, Richard / Rotter, J. Michael (1996): Technique for Precise Measurement of Large-Scale Silos and Tanks. In: Journal of Surveying Engineering (ASCE), v. 122, n. 1 (February 1996).

    https://doi.org/10.1061/(asce)0733-9453(1996)122:1(14)

  5. Ding, Xiaoli / Coleman, Richard / Rotter, J. Michael (1996): Surface Profiling System for Measurement of Engineering Structures. In: Journal of Surveying Engineering (ASCE), v. 122, n. 1 (February 1996).

    https://doi.org/10.1061/(asce)0733-9453(1996)122:1(3)

  6. Chen, Lei / Rotter, J. Michael / Doerich-Stavridis, Cornelia (2012): Practical calculations for uniform external pressure buckling in cylindrical shells with stepped walls. In: Thin-Walled Structures, v. 61 (December 2012).

    https://doi.org/10.1016/j.tws.2012.07.009

  7. Liu, Qing / Sadowski, Adam J. / Rotter, J. Michael (2019): Ovalization Restraint in Four-Point Bending Tests of Tubes. In: Journal of Engineering Mechanics (ASCE), v. 145, n. 3 (March 2019).

    https://doi.org/10.1061/(asce)em.1943-7889.0001571

  8. Sadowski, Adam J. / Rotter, J. Michael (2010): Study of Buckling in Steel Silos under Eccentric Discharge Flows of Stored Solids. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 6 (June 2010).

    https://doi.org/10.1061/(asce)em.1943-7889.0000112

  9. Topkaya, Cem / Rotter, J. Michael (2011): Ring Beam Stiffness Criterion for Column-Supported Metal Silos. In: Journal of Engineering Mechanics (ASCE), v. 137, n. 12 (December 2011).

    https://doi.org/10.1061/(asce)em.1943-7889.0000291

  10. Holst, J. Mark F. G. / Rotter, J. Michael / Calladine, Chris R. (1999): Imperfections in Cylindrical Shells Resulting from Fabrication Misfits. In: Journal of Engineering Mechanics (ASCE), v. 125, n. 4 (April 1999).

    https://doi.org/10.1061/(asce)0733-9399(1999)125:4(410)

  11. Holst, J. Mark F. G. / Ooi, Jin Y. / Rotter, J. Michael / Rong, Graham H. (1999): Numerical Modeling of Silo Filling. I: Continuum Analyses. In: Journal of Engineering Mechanics (ASCE), v. 125, n. 1 (January 1999).

    https://doi.org/10.1061/(asce)0733-9399(1999)125:1(94)

  12. Holst, J. Mark F. G. / Rotter, J. Michael / Ooi, Jin Y. / Rong, Graham H. (1999): Numerical Modeling of Silo Filling. II: Discrete Element Analyses. In: Journal of Engineering Mechanics (ASCE), v. 125, n. 1 (January 1999).

    https://doi.org/10.1061/(asce)0733-9399(1999)125:1(104)

  13. Gould, Phillip L. / Lin, Jhun‐Sou / Rotter, J. Michael (1985): Linear Stress Analysis of Torospherical Head. In: Journal of Engineering Mechanics (ASCE), v. 111, n. 10 (October 1985).

    https://doi.org/10.1061/(asce)0733-9399(1985)111:10(1295)

  14. Zeybek, Özer / Topkaya, Cem / Rotter, J. Michael (2019): Stress resultants for wind girders in open-top cylindrical steel tanks. In: Engineering Structures, v. 196 (October 2019).

    https://doi.org/10.1016/j.engstruct.2019.109347

  15. Holst, J. Mark F. G. / Rotter, J. Michael / Calladine, Chris R. (2000): Imperfections and buckling in cylindrical shells with consistent residual stresses. In: Journal of Constructional Steel Research, v. 54, n. 2 (May 2000).

    https://doi.org/10.1016/s0143-974x(99)00047-4

  16. Sadowski, Adam J. / Rotter, J. Michael / Stafford, Peter J. / Reinke, Thomas / Ummenhofer, Thomas (2017): On the gradient of the yield plateau in structural carbon steels. In: Journal of Constructional Steel Research, v. 130 (March 2017).

    https://doi.org/10.1016/j.jcsr.2016.11.024

  17. Sadowski, Adam J. / Rotter, J. Michael (2014): Modelling and behaviour of cylindrical shell structures with helical features. In: Computers & Structures, v. 133 (March 2014).

    https://doi.org/10.1016/j.compstruc.2013.11.012

  18. Sadowski, Adam J. / Rotter, J. Michael / Reinke, Thomas / Ummenhofer, Thomas (2015): Statistical analysis of the material properties of selected structural carbon steels. In: Structural Safety, v. 53 (March 2015).

    https://doi.org/10.1016/j.strusafe.2014.12.002

  19. Rotter, J. Michael (1990): Structural Design of Light‐Gauge Silo Hoppers. In: Journal of Structural Engineering (ASCE), v. 116, n. 7 (July 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1907)

  20. Rotter, J. Michael (1990): Local Collapse of Axially Compressed Pressurized Thin Steel Cylinders. In: Journal of Structural Engineering (ASCE), v. 116, n. 7 (July 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1955)

  21. Teng, Jin‐Guang / Rotter, J. Michael (1991): Strength of Welded Steel Silo Hoppers Under Filling and Flow Pressures. In: Journal of Structural Engineering (ASCE), v. 117, n. 9 (September 1991).

    https://doi.org/10.1061/(asce)0733-9445(1991)117:9(2567)

  22. Sadowski, Adam J. / Rotter, J. Michael (2012): Structural Behavior of Thin-Walled Metal Silos Subject to Different Flow Channel Sizes under Eccentric Discharge Pressures. In: Journal of Structural Engineering (ASCE), v. 138, n. 7 (July 2012).

    https://doi.org/10.1061/(asce)st.1943-541x.0000530

  23. Rotter, J. Michael / Mackenzie, Greig / Lee, Martin (2016): Spherical Dome Buckling With Edge Ring Support. In: Structures, v. 8 (November 2016).

    https://doi.org/10.1016/j.istruc.2016.05.008

  24. Rotter, J. Michael (2011): Shell buckling design and assessment and the LBA-MNA methodology. In: Stahlbau, v. 80, n. 11 (November 2011).

    https://doi.org/10.1002/stab.201101491

  25. Rotter, J. Michael (1998): Metal silos. In: Progress in Structural Engineering and Materials, v. 1, n. 4 (July 1998).

    https://doi.org/10.1002/pse.2260010412

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine