0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

J. Michael Rotter

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Sadowski, Adam J. / Rotter, J. Michael (2011): Buckling of very slender metal silos under eccentric discharge. In: Engineering Structures, v. 33, n. 4 (April 2011).

    https://doi.org/10.1016/j.engstruct.2010.12.040

  2. Chen, Lei / Rotter, J. Michael / Doerich, Cornelia (2011): Buckling of cylindrical shells with stepwise variable wall thickness under uniform external pressure. In: Engineering Structures, v. 33, n. 12 (Dezember 2011).

    https://doi.org/10.1016/j.engstruct.2011.07.021

  3. Wang, Jie / Fajuyitan, O. Kunle / Orabi, M. Anwar / Rotter, J. Michael / Sadowski, Adam J. (2020): Cylindrical shells under uniform bending in the framework of Reference Resistance Design. In: Journal of Constructional Steel Research, v. 166 (März 2020).

    https://doi.org/10.1016/j.jcsr.2019.105920

  4. Doerich, Cornelia / Rotter, J. Michael (2011): Generalised capacity curves for stability and plasticity: Application and limitations. In: Thin-Walled Structures, v. 49, n. 9 (September 2011).

    https://doi.org/10.1016/j.tws.2011.04.005

  5. Sadowski, Adam J. / Rotter, J. Michael (2013): Buckling in Eccentrically Discharged Silos and the Assumed Pressure Distribution. In: Journal of Engineering Mechanics (ASCE), v. 139, n. 7 (Juli 2013).

    https://doi.org/10.1061/(asce)em.1943-7889.0000525

  6. Topkaya, Cem / Rotter, J. Michael (2014): Ideal Location of Intermediate Ring Stiffeners on Discretely Supported Cylindrical Shells. In: Journal of Engineering Mechanics (ASCE), v. 140, n. 4 (April 2014).

    https://doi.org/10.1061/(asce)em.1943-7889.0000688

  7. Holst, J. Mark F. G. / Rotter, J. Michael / Calladine, Chris R. (1999): Imperfections in Cylindrical Shells Resulting from Fabrication Misfits. In: Journal of Engineering Mechanics (ASCE), v. 125, n. 4 (April 1999).

    https://doi.org/10.1061/(asce)0733-9399(1999)125:4(410)

  8. Teng, Jin‐Guang / Rotter, J. Michael (1992): Buckling of Pressurized Axisymmetrically Imperfect Cylinders under Axial Loads. In: Journal of Engineering Mechanics (ASCE), v. 118, n. 2 (Februar 1992).

    https://doi.org/10.1061/(asce)0733-9399(1992)118:2(229)

  9. Teng, Jin‐Guang / Rotter, J. Michael (1988): Buckling of Restrained Monosymmetric Rings. In: Journal of Engineering Mechanics (ASCE), v. 114, n. 10 (Oktober 1988).

    https://doi.org/10.1061/(asce)0733-9399(1988)114:10(1651)

  10. Holst, J. Mark F. G. / Rotter, J. Michael / Calladine, Chris R. (2000): Imperfections and buckling in cylindrical shells with consistent residual stresses. In: Journal of Constructional Steel Research, v. 54, n. 2 (Mai 2000).

    https://doi.org/10.1016/s0143-974x(99)00047-4

  11. Sadowski, Adam J. / Rotter, J. Michael / Reinke, Thomas / Ummenhofer, Thomas (2015): Analysis of variance of tensile tests from spiral welded carbon steel tubes. In: Construction and Building Materials, v. 75 (Januar 2015).

    https://doi.org/10.1016/j.conbuildmat.2014.11.015

  12. Rotter, J. Michael (1998): Development of Proposed European Design Rules for Buckling of Axially Compressed Cylinders. In: Advances in Structural Engineering, v. 1, n. 4 (Oktober 1998).

    https://doi.org/10.1177/136943329800100404

  13. Rotter, J. Michael / Sadowski, Adam J. (2012): Cylindrical shell bending theory for orthotropic shells under general axisymmetric pressure distributions. In: Engineering Structures, v. 42 (September 2012).

    https://doi.org/10.1016/j.engstruct.2012.04.024

  14. Chen, Lei / Rotter, J. Michael (2012): Buckling of anchored cylindrical shells of uniform thickness under wind load. In: Engineering Structures, v. 41 (August 2012).

    https://doi.org/10.1016/j.engstruct.2012.03.046

  15. Teng, J. G. / Lin, X. / Rotter, J. Michael / Ding, X. L. (2005): Analysis of geometric imperfections in full-scale welded steel silos. In: Engineering Structures, v. 27, n. 6 (Mai 2005).

    https://doi.org/10.1016/j.engstruct.2005.01.013

  16. Sadowski, Adam J. / Van Es, Sjors H. J. / Reinke, Thomas / Rotter, J. Michael / Gresnigt, A. M. (Nol) / Ummenhofer, Thomas (2015): Harmonic analysis of measured initial geometric imperfections in large spiral welded carbon steel tubes. In: Engineering Structures, v. 85 (Februar 2015).

    https://doi.org/10.1016/j.engstruct.2014.12.033

  17. Rotter, J. Michael / Teng, Jin‐Guang (1989): Elastic Stability of Lap‐Jointed Cylinders. In: Journal of Structural Engineering (ASCE), v. 115, n. 3 (März 1989).

    https://doi.org/10.1061/(asce)0733-9445(1989)115:3(683)

  18. Rotter, J. Michael / Teng, Jin‐Guang (1989): Elastic Stability of Cylindrical Shells with Weld Depressions. In: Journal of Structural Engineering (ASCE), v. 115, n. 5 (Mai 1989).

    https://doi.org/10.1061/(asce)0733-9445(1989)115:5(1244)

  19. Rotter, J. Michael / Zhang, Qiao (1990): Elastic Buckling of Imperfect Cylinders Containing Granular Solids. In: Journal of Structural Engineering (ASCE), v. 116, n. 8 (August 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:8(2253)

  20. Teng, Jin‐Guang / Rotter, J. Michael (1991): Collapse Behavior and Strength of Steel Silo Transition Junctions. Part I: Collapse Mechanics. In: Journal of Structural Engineering (ASCE), v. 117, n. 12 (Dezember 1991).

    https://doi.org/10.1061/(asce)0733-9445(1991)117:12(3587)

  21. Teng, Jin‐Guang / Rotter, J. Michael (1991): Collapse Behavior and Strength of Steel Silo Transition Junctions. Part II: Parametric Study. In: Journal of Structural Engineering (ASCE), v. 117, n. 12 (Dezember 1991).

    https://doi.org/10.1061/(asce)0733-9445(1991)117:12(3605)

  22. Doerich, Cornelia / Rotter, J. Michael (2008): Behavior of Cylindrical Steel Shells Supported on Local Brackets. In: Journal of Structural Engineering (ASCE), v. 134, n. 8 (August 2008).

    https://doi.org/10.1061/(asce)0733-9445(2008)134:8(1269)

  23. Rotter, J. Michael / Sadowski, Adam J. (2017): Full Plastic Resistance of Tubes Under Bending and Axial Force: Exact Treatment and Approximations. In: Structures, v. 10 (Mai 2017).

    https://doi.org/10.1016/j.istruc.2016.11.004

  24. Peters, Dirk Jan / Sadowski, Adam / Rotter, J. Michael / Taras, Andreas (2017): 13.06: Calibration of Eurocode design models of thin-walled cylinder under bending with full scale tests. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.429

  25. Sadowski, Adam J. / Rotter, J. Michael / Ummenhofer, Thomas (2017): 12.13: On recent characterisations of the post-yield properties of structural carbon steels. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.413

  26. Brown, C. J. / Goodey, R. J. / Rotter, J. Michael (2017): 04.20: Bending of rectangular plates subject to non-uniform pressure distributions relevant to containment structures. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.140

  27. Knoedel, Peter / Ummenhofer, Thomas / Rotter, J. Michael (2017): 04.16: Rethinking imperfections in tanks and silos. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.136

  28. Zeybek, Özer / Topkaya, Cem / Rotter, J. Michael (2017): 04.12: Analysis of silo supporting ring beams: Resting on discrete supports. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.132

  29. Rotter, J. Michael / Al Lawati, Hussain (2017): 04.11: Strength enhancement in axially compressed cylinders with stepped walls. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.131

  30. Gorbachov, Anna / Stranghöner, Natalie / Rotter, J. Michael (2017): 04.03: Buckling behaviour of axially compressed cylindrical shells made of stainless steel. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.123

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine