0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

J. Michael Rotter

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Sadowski, Adam J. / Morata, Maria Terres / Kathirkamanathan, Lijithan / Seidel, Marc / Rotter, J. Michael (2023): On the existing test dataset of isotropic cylindrical metal shells under axial compression and the design of modern metal civil engineering shells. In: Structural Safety, v. 102 (Mai 2023).

    https://doi.org/10.1016/j.strusafe.2022.102285

  2. Zeybek, Özer / Topkaya, Cem / Rotter, J. Michael (2021): Stability of Open‐Top Cylindrical Steel Tanks with Primary Stiffening Ring under Wind Loading. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1486

  3. Rotter, J. Michael (1982): Multiple Column Curves by Modifying Factors. In: Journal of the Structural Division (ASCE), v. 108, n. 7 (Juli 1982).

    https://doi.org/10.1061/jsdeag.0005998

  4. Ding, Xiaoli / Coleman, Richard / Rotter, J. Michael (1996): Technique for Precise Measurement of Large-Scale Silos and Tanks. In: Journal of Surveying Engineering (ASCE), v. 122, n. 1 (Februar 1996).

    https://doi.org/10.1061/(asce)0733-9453(1996)122:1(14)

  5. Ding, Xiaoli / Coleman, Richard / Rotter, J. Michael (1996): Surface Profiling System for Measurement of Engineering Structures. In: Journal of Surveying Engineering (ASCE), v. 122, n. 1 (Februar 1996).

    https://doi.org/10.1061/(asce)0733-9453(1996)122:1(3)

  6. Chen, Lei / Rotter, J. Michael / Doerich-Stavridis, Cornelia (2012): Practical calculations for uniform external pressure buckling in cylindrical shells with stepped walls. In: Thin-Walled Structures, v. 61 (Dezember 2012).

    https://doi.org/10.1016/j.tws.2012.07.009

  7. Liu, Qing / Sadowski, Adam J. / Rotter, J. Michael (2019): Ovalization Restraint in Four-Point Bending Tests of Tubes. In: Journal of Engineering Mechanics (ASCE), v. 145, n. 3 (März 2019).

    https://doi.org/10.1061/(asce)em.1943-7889.0001571

  8. Sadowski, Adam J. / Rotter, J. Michael (2010): Study of Buckling in Steel Silos under Eccentric Discharge Flows of Stored Solids. In: Journal of Engineering Mechanics (ASCE), v. 136, n. 6 (Juni 2010).

    https://doi.org/10.1061/(asce)em.1943-7889.0000112

  9. Topkaya, Cem / Rotter, J. Michael (2011): Ring Beam Stiffness Criterion for Column-Supported Metal Silos. In: Journal of Engineering Mechanics (ASCE), v. 137, n. 12 (Dezember 2011).

    https://doi.org/10.1061/(asce)em.1943-7889.0000291

  10. Holst, J. Mark F. G. / Rotter, J. Michael / Calladine, Chris R. (1999): Imperfections in Cylindrical Shells Resulting from Fabrication Misfits. In: Journal of Engineering Mechanics (ASCE), v. 125, n. 4 (April 1999).

    https://doi.org/10.1061/(asce)0733-9399(1999)125:4(410)

  11. Holst, J. Mark F. G. / Ooi, Jin Y. / Rotter, J. Michael / Rong, Graham H. (1999): Numerical Modeling of Silo Filling. I: Continuum Analyses. In: Journal of Engineering Mechanics (ASCE), v. 125, n. 1 (Januar 1999).

    https://doi.org/10.1061/(asce)0733-9399(1999)125:1(94)

  12. Holst, J. Mark F. G. / Rotter, J. Michael / Ooi, Jin Y. / Rong, Graham H. (1999): Numerical Modeling of Silo Filling. II: Discrete Element Analyses. In: Journal of Engineering Mechanics (ASCE), v. 125, n. 1 (Januar 1999).

    https://doi.org/10.1061/(asce)0733-9399(1999)125:1(104)

  13. Gould, Phillip L. / Lin, Jhun‐Sou / Rotter, J. Michael (1985): Linear Stress Analysis of Torospherical Head. In: Journal of Engineering Mechanics (ASCE), v. 111, n. 10 (Oktober 1985).

    https://doi.org/10.1061/(asce)0733-9399(1985)111:10(1295)

  14. Zeybek, Özer / Topkaya, Cem / Rotter, J. Michael (2019): Stress resultants for wind girders in open-top cylindrical steel tanks. In: Engineering Structures, v. 196 (Oktober 2019).

    https://doi.org/10.1016/j.engstruct.2019.109347

  15. Holst, J. Mark F. G. / Rotter, J. Michael / Calladine, Chris R. (2000): Imperfections and buckling in cylindrical shells with consistent residual stresses. In: Journal of Constructional Steel Research, v. 54, n. 2 (Mai 2000).

    https://doi.org/10.1016/s0143-974x(99)00047-4

  16. Sadowski, Adam J. / Rotter, J. Michael / Stafford, Peter J. / Reinke, Thomas / Ummenhofer, Thomas (2017): On the gradient of the yield plateau in structural carbon steels. In: Journal of Constructional Steel Research, v. 130 (März 2017).

    https://doi.org/10.1016/j.jcsr.2016.11.024

  17. Sadowski, Adam J. / Rotter, J. Michael (2014): Modelling and behaviour of cylindrical shell structures with helical features. In: Computers & Structures, v. 133 (März 2014).

    https://doi.org/10.1016/j.compstruc.2013.11.012

  18. Sadowski, Adam J. / Rotter, J. Michael / Reinke, Thomas / Ummenhofer, Thomas (2015): Statistical analysis of the material properties of selected structural carbon steels. In: Structural Safety, v. 53 (März 2015).

    https://doi.org/10.1016/j.strusafe.2014.12.002

  19. Rotter, J. Michael (1990): Structural Design of Light‐Gauge Silo Hoppers. In: Journal of Structural Engineering (ASCE), v. 116, n. 7 (Juli 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1907)

  20. Rotter, J. Michael (1990): Local Collapse of Axially Compressed Pressurized Thin Steel Cylinders. In: Journal of Structural Engineering (ASCE), v. 116, n. 7 (Juli 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1955)

  21. Teng, Jin‐Guang / Rotter, J. Michael (1991): Strength of Welded Steel Silo Hoppers Under Filling and Flow Pressures. In: Journal of Structural Engineering (ASCE), v. 117, n. 9 (September 1991).

    https://doi.org/10.1061/(asce)0733-9445(1991)117:9(2567)

  22. Sadowski, Adam J. / Rotter, J. Michael (2012): Structural Behavior of Thin-Walled Metal Silos Subject to Different Flow Channel Sizes under Eccentric Discharge Pressures. In: Journal of Structural Engineering (ASCE), v. 138, n. 7 (Juli 2012).

    https://doi.org/10.1061/(asce)st.1943-541x.0000530

  23. Rotter, J. Michael / Mackenzie, Greig / Lee, Martin (2016): Spherical Dome Buckling With Edge Ring Support. In: Structures, v. 8 (November 2016).

    https://doi.org/10.1016/j.istruc.2016.05.008

  24. Rotter, J. Michael (2011): Shell buckling design and assessment and the LBA-MNA methodology. In: Stahlbau, v. 80, n. 11 (November 2011).

    https://doi.org/10.1002/stab.201101491

  25. Rotter, J. Michael (1998): Metal silos. In: Progress in Structural Engineering and Materials, v. 1, n. 4 (Juli 1998).

    https://doi.org/10.1002/pse.2260010412

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine