Ye Qian 
- (2024): Superhydrophobic foamed concrete based on response surface method: Mix design and its potential application in roofing systems. In: Structures, v. 69 (November 2024).
- (2025): Nature-inspired approach for enhancing the fracture performance of 3D printed strain-hardening cementitious composites (3DP-SHCC). In: Engineering Structures, v. 322 (January 2025).
- (2024): 3D printed strain-hardening cementitious composites (3DP-SHCC) reticulated shell roof inspired by the water spider. In: Automation in Construction, v. 167 (November 2024).
- (2024): Enhancing the flexural performance of concrete beams with 3D-printed UHP-SHCC permanent formwork via graded fiber volume fraction. In: Composite Structures, v. 341 (August 2024).
- (2024): Development and evaluation of physical and mechanical properties of alkali-activated multi-component composite grouting materials. In: Construction and Building Materials, v. 434 (July 2024).
- (2024): Flexural behaviour of post-tensioned precast beams manufactured with basalt-fibre-reinforced recycled concrete–conventional concrete. In: Journal of Building Engineering, v. 89 (July 2024).
- (2024): Interfacial bonding performance of 3D-printed Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC) and cast normal concrete. In: Journal of Building Engineering, v. 82 (April 2024).
- (2016): Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes. In: Cement and Concrete Research, v. 90 (December 2016).
- (2016): Flow onset of fresh mortars in rheometers: Contribution of paste deflocculation and sand particle migration. In: Cement and Concrete Research, v. 90 (December 2016).
- (2018): Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures. In: Cement and Concrete Research, v. 108 (June 2018).
- (2018): Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC). In: Cement and Concrete Research, v. 107 (May 2018).
- (2018): Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE). In: Cement and Concrete Research, v. 111 (September 2018).
- (2021): Effect of polycarboxylate ether (PCE) superplasticizer on thixotropic structural build-up of fresh cement pastes over time. In: Construction and Building Materials, v. 291 (July 2021).
- (2022): Effects of Solid Activator and Fly Ash on Rheology and Thixotropy of One-Part Alkali-Activated Pastes. In: Journal of Advanced Concrete Technology, v. 20, n. 3 (17 March 2022).
- (2018): Performance-based study on the rheological and hardened properties of blended cement mortars incorporating palygorskite clays and carbon nanotubes. In: Construction and Building Materials, v. 171 (May 2018).
- (2019): Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent. In: Construction and Building Materials, v. 211 (June 2019).
- (2019): A systematical review of 3D printable cementitious materials. In: Construction and Building Materials, v. 207 (May 2019).
- (2016): Interfacial Tensile Bond between Substrate Concrete and Repairing Mortar under Freeze-Thaw Cycles. In: Journal of Advanced Concrete Technology, v. 14, n. 8 ( 2016).
Structurae cooperates with
