Ye Qian 
- (2024): Flexural behaviour of post-tensioned precast beams manufactured with basalt-fibre-reinforced recycled concrete–conventional concrete. Dans: Journal of Building Engineering, v. 89 (juillet 2024).
- (2024): Interfacial bonding performance of 3D-printed Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC) and cast normal concrete. Dans: Journal of Building Engineering, v. 82 (avril 2024).
- (2018): Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC). Dans: Cement and Concrete Research, v. 107 (mai 2018).
- (2018): Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures. Dans: Cement and Concrete Research, v. 108 (juin 2018).
- (2016): Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes. Dans: Cement and Concrete Research, v. 90 (décembre 2016).
- (2016): Flow onset of fresh mortars in rheometers: Contribution of paste deflocculation and sand particle migration. Dans: Cement and Concrete Research, v. 90 (décembre 2016).
- (2018): Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE). Dans: Cement and Concrete Research, v. 111 (septembre 2018).
- (2021): Effect of polycarboxylate ether (PCE) superplasticizer on thixotropic structural build-up of fresh cement pastes over time. Dans: Construction and Building Materials, v. 291 (juillet 2021).
- (2022): Effects of Solid Activator and Fly Ash on Rheology and Thixotropy of One-Part Alkali-Activated Pastes. Dans: Journal of Advanced Concrete Technology, v. 20, n. 3 (17 mars 2022).
- (2018): Performance-based study on the rheological and hardened properties of blended cement mortars incorporating palygorskite clays and carbon nanotubes. Dans: Construction and Building Materials, v. 171 (mai 2018).
- (2019): Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent. Dans: Construction and Building Materials, v. 211 (juin 2019).
- (2019): A systematical review of 3D printable cementitious materials. Dans: Construction and Building Materials, v. 207 (mai 2019).
- (2016): Interfacial Tensile Bond between Substrate Concrete and Repairing Mortar under Freeze-Thaw Cycles. Dans: Journal of Advanced Concrete Technology, v. 14, n. 8 ( 2016).
Structurae coopère avec
