Luca Pelà 
- (2024): Experimental analysis of the compressive behaviour of perforated brick masonry using digital image correlation. In: Construction and Building Materials, v. 431 (June 2024).
- (2024): Dynamic characteristics of stone masonry walls before and after damage: Experimental and numerical investigations. In: Engineering Structures, v. 306 (May 2024).
- (2023): Experimental and numerical insights on the in-plane behaviour of unreinforced and TRM/SRG retrofitted brick masonry walls by diagonal compression and shear-compression testing. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): Effect of cross section aspect ratio and bearing surfaces treatment on the compressive strength of solid fired clay brick specimens. In: Construction and Building Materials, v. 383 (June 2023).
- (2022): Anisotropy and compressive strength evaluation of solid fired clay bricks by testing small specimens. In: Construction and Building Materials, v. 344 (August 2022).
- (2021): Experimental and numerical insights on the diagonal compression test for the shear characterisation of masonry. In: Construction and Building Materials, v. 287 (June 2021).
- (2022): Experimental cyclic behaviour of shear masonry walls reinforced with single and double layered Steel Reinforced Grout. In: Construction and Building Materials, v. 320 (February 2022).
- (2022): Cyclic shear-compression testing of brick masonry walls repaired and retrofitted with basalt textile reinforced mortar. In: Composite Structures, v. 283 (March 2022).
- (2021): Experimental setup and numerical evaluation of the compression test on thin tiles for masonry timbrel vaults. In: Construction and Building Materials, v. 313 (December 2021).
- (2021): Experimental comparison of two testing setups for characterizing the shear mechanical properties of masonry. In: Journal of Building Engineering, v. 44 (December 2021).
- (2020): Assessing community resilience, housing recovery and impact of mitigation strategies at the urban scale: a case study after the 2012 Northern Italy Earthquake. In: Bulletin of Earthquake Engineering, v. 18, n. 13 (July 2020).
- (2020): Automated data analysis for static structural health monitoring of masonry heritage structures. In: Structural Control and Health Monitoring, v. 27, n. 10 (2 September 2020).
- (2020): In-plane shear behaviour by diagonal compression testing of brick masonry walls strengthened with basalt and steel textile reinforced mortars. In: Construction and Building Materials, v. 240 (April 2020).
- (2020): Influence of recycled limestone filler additions on the mechanical behaviour of commercial premixed hydraulic lime based mortars. In: Construction and Building Materials, v. 238 (March 2020).
- (2019): Cylindrical samples of brick masonry with aerial lime mortar under compression: Experimental and numerical study. In: Construction and Building Materials, v. 227 (December 2019).
- (2019): Experimental analysis of the size effect on the compressive behaviour of cylindrical samples core-drilled from existing brick masonry. In: Construction and Building Materials, v. 228 (December 2019).
- (2019): Analytical Derivation of Seismic Fragility Curves for Historical Masonry Structures Based on Stochastic Analysis of Uncertain Material Parameters. In: International Journal of Architectural Heritage, v. 13, n. 7 ( 2019).
- (2019): Dynamic elastic properties of brick masonry constituents. In: Construction and Building Materials, v. 199 (February 2019).
- (2013): Comparison of seismic assessment procedures for masonry arch bridges. In: Construction and Building Materials, v. 38 (January 2013).
- (2016): Compression test of masonry core samples extracted from existing brickwork. In: Construction and Building Materials, v. 119 (August 2016).
- (2016): Combining Brazilian tests on masonry cores and double punch tests for the mechanical characterization of historical mortars. In: Construction and Building Materials, v. 112 (June 2016).
- (2016): Analysis of the Effect of Provisional Ties on the Construction and Current Deformation of Mallorca Cathedral. In: International Journal of Architectural Heritage, v. 10, n. 4 (December 2016).
- (2013): Continuum FE models for the analysis of Mallorca Cathedral. In: Engineering Structures, v. 46 (January 2013).
- (2017): Experimental evaluation of the shear strength of aerial lime mortar brickwork by standard tests on triplets and non-standard tests on core samples. In: Engineering Structures, v. 136 (April 2017).
- (2015): Comparison of seismic analysis methods applied to a historical church struck by 2009 L'Aquila earthquake. In: Bulletin of Earthquake Engineering, v. 13, n. 12 (July 2015).
- (2017): Analysis of the performance in the linear field of Equivalent-Frame Models for regular and irregular masonry walls. In: Engineering Structures, v. 145 (August 2017).
- (2017): Dynamic Identification and Static Loading Tests of Timbrel Vaults: Application to a Modernist 20th Century Heritage Structure. In: International Journal of Architectural Heritage, v. 11, n. 4 ( 2017).
- (2018): Building survey forms for heterogeneous urban areas in seismically hazardous zones. Application to the historical center of Valparaíso, Chile. In: International Journal of Architectural Heritage, v. 12, n. 7-8 ( 2018).
- (2018): An Enhanced Finite Element Macro-Model for the Realistic Simulation of Localized Cracks in Masonry Structures: A Large-Scale Application. In: International Journal of Architectural Heritage, v. 12, n. 3 (July 2018).
- (2018): Combined In-Situ and Laboratory Minor Destructive Testing of Historical Mortars. In: International Journal of Architectural Heritage, v. 12, n. 3 (July 2018).
Structurae cooperates with
