Yingjie Ning 
- : Post-earthquake inspection of high-speed railway viaducts with multi-scale task interaction deep learning strategy. In: Advances in Structural Engineering.
- (2024): Estimation of load-carrying capacity of cracked RC beams using 3D digital twin model integrated with point clouds and images. In: Engineering Structures, v. 310 (July 2024).
- (2024): State-of-the art on preparation, performance, and ecological applications of planting concrete. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): The impact of accelerated maintenance system on alkali-activated mortar incorporating ultra-fine dredged sand. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Compressive strength, pore structure, and hydration products of slag foam concrete under sulfate and chloride environment. In: Construction and Building Materials, v. 394 (August 2023).
- (2024): Mesoscale Damage Detection and Surface Deterioration of Freeze–Thawed Concrete Cores Using 3D CT Scanning and Roughness Quantification. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (March 2024).
- (2022): Investigation of the Deformation and Failure Characteristics of High-Strength Concrete in Dynamic Splitting Tests. In: International Journal of Concrete Structures and Materials, v. 16, n. 1 (December 2022).
- (2023): Experimental investigation of mechanical behavior and microstructural properties in roadbed foam concrete at different densities and correlation analysis. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Quantitative Visualization Monitoring of Cracks at Shotcrete-Rock Interface Based on Acoustic Emission. In: Structural Control and Health Monitoring, v. 2023 (February 2023).
- (2023): Effect of Original Mix Proportion on Rapid Removing of Attached Mortar for Recycled Concrete Aggregate Through a Freeze-thaw Approach. In: Journal of Advanced Concrete Technology, v. 21, n. 6 (7 June 2023).
- (2023): Utilization of ultra-fine dredged sand from the Yangtze River in alkali-activated slag/fly ash mortars: Mechanical properties, drying shrinkage and microstructure. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Investigation on the impact of Thermo-Drying towards Freeze-Thaw cycle processing for recycled coarse aggregate. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Influence of interface roughness and rock type on mixed mode fracture characteristics of tunnel shotcrete-rock interface. In: Construction and Building Materials, v. 386 (July 2023).
- (2023): Experimental Study of Crack Characteristics of Self-Compacting Rubberized Concrete under Four-Point Bending Based on Acoustic Emission Technique. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (May 2023).
- (2023): Experimental and Numerical Investigation on the Triaxial Compressive Behavior of Steamed Recycled Aggregate Concrete. In: Buildings, v. 13, n. 2 (14 February 2023).
- (2023): Effect mechanism of slag activity on the basic tensile creep of alkali-activated slag mortar. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): Deep insight into mechanical behaviour and microstructure mechanism of dredged sand in the lower reaches of the Yangtze River and manufactured sand concrete. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): Deformation responses and strength criteria of different shotcrete-rock composites under triaxial cyclic compression. In: Construction and Building Materials, v. 374 (April 2023).
- (2023): Mesoscale discrete analysis of mechanical properties of recycled aggregate concrete based on Voronoi mesh. In: Construction and Building Materials, v. 370 (March 2023).
- (2023): Experimental investigation of rock–shotcrete interface damage under dynamic splitting using digital image correlation and acoustic emission. In: Structural Concrete, v. 24, n. 3 (April 2023).
- (2022): Uniaxial compression failure characteristics of 60-year-old bridge concrete under different loading rates. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Microstructure and damage evolution of hydraulic concrete exposed to freeze–thaw cycles. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Evaluation of fracture behavior of high-strength hydraulic concrete damaged by freeze-thaw cycle test. In: Construction and Building Materials, v. 321 (February 2022).
- (2021): Extended life concrete bridge decks utilizing internal curing to reduce cracking – Materials characterization and engineering demonstration. In: Construction and Building Materials, v. 275 (March 2021).
- (2022): Mechanical characteristics and energy dissipation characteristics of dredged sand concrete during triaxial loading. In: Journal of Building Engineering, v. 55 (September 2022).
- (2022): Beneficial utilization of ultra-fine dredged sand from Yangtze River channel as a concrete material based on the minimum paste theory. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Identification of fracture damage characteristics in ultra-high performance cement-based composite using digital image correlation and acoustic emission techniques. In: Composite Structures, v. 291 (July 2022).
- (2022): High temperature effect of foamed concrete under equal displacement increment triaxial cyclic compression. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Experimental study on the effect of wastewater and waste slurry of mixing plant on mechanical properties and microstructure of concrete. In: Journal of Building Engineering, v. 52 (July 2022).
- (2022): Evaluation and prediction on abrasion resistance of hydraulic concrete after exposure to different freeze-thaw cycles. In: Construction and Building Materials, v. 316 (January 2022).
Structurae cooperates with
