Yang Lv 
- (2025): Upward propagation of ground disturbance induced by water–sand inrush into a defective tunnel in a dual-stratum geological condition. In: Tunnelling and Underground Space Technology, v. 158 (April 2025).
- (2024): Study on the properties and carbon footprint of low heat cement clinker prepared by recycled concrete powder and calcium carbide slag. In: Construction and Building Materials, v. 441 (August 2024).
- (2024): Screening and environmental risk assessment of VOCs preferential pollutants in net flavor rubber-modified asphalt based on the information entropy method. In: Construction and Building Materials, v. 420 (March 2024).
- (2024): Utilization of groundnut shell ash in alkali-activated slag: Comparison of hydration, shrinkage and compressive strength. In: Construction and Building Materials, v. 426 (May 2024).
- (2023): Study of synergistic effect of diatomite and modified attapulgite on reducing asphalt volatile organic compounds emission. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): A systematic review on the strategies of reducing asphalt pavement temperature. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2021): Research on gradient characteristics and its prediction method of induction heating asphalt concrete. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Shear strength of steel plate shear walls considering the gravity load and in-plane bending moment effect by vertical stress distributions. In: Journal of Building Engineering, v. 44 (December 2021).
- (2018): Sodium Acetate Trihydrate–Crystallization Inhibitor System for Seasonal Latent Heat Storage. In: Journal of Energy Engineering, v. 144, n. 3 (June 2018).
- (2020): Study on indoor and outdoor permeability coefficients and bacterial components, sources of fine particles in severe cold region of China. In: Sustainable Cities and Society, v. 55 (April 2020).
- (2021): Shear strength of stiffened steel shear walls with considering the gravity load effect through a three-segment distribution. In: Structures, v. 29 (February 2021).
- (2018): The transmission characteristics of indoor particles under two ventilation modes. In: Energy and Buildings, v. 163 (March 2018).
- (2020): Sources, concentrations, and transport models of ultrafine particles near highways: a Literature Review. In: Building and Environment, v. 186 (December 2020).
- (2020): Utilization of municipal sewage sludge and waste glass powder in production of lightweight aggregates. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Vertical stress distributions of a thin rectangular steel wall under compression and in-plane bending. In: International Journal of Structural Stability and Dynamics, v. 20, n. 8 (July 2020).
- (2020): A stress distribution of thin rectangular steel wall under a uniform compression. In: International Journal of Structural Stability and Dynamics, v. 20, n. 3 (February 2020).
- (2018): Utilization of municipal solid waste incineration bottom ash in autoclaved aerated concrete. In: Construction and Building Materials, v. 178 (July 2018).
- (2020): Utilization of the circulating fluidized bed combustion ash in autoclaved aerated concrete: Effect of superplasticizer. In: Construction and Building Materials, v. 237 (March 2020).
- (2019): Study on microwave sterilization technology of humidifier in central air conditioning system. In: Building and Environment, v. 160 (August 2019).
- (2020): Utilization of limestone powder and fly ash in blended cement: Rheology, strength and hydration characteristics. In: Construction and Building Materials, v. 232 (January 2020).
- (2019): The slurry and physical-mechanical performance of autoclaved aerated concrete with high content solid wastes: Effect of grinding process. In: Construction and Building Materials, v. 218 (September 2019).
- (2019): Utilization of miscanthus combustion ash as internal curing agent in cement-based materials: Effect on autogenous shrinkage. In: Construction and Building Materials, v. 207 (May 2019).
- (2019): Shear-displacement diagram of steel plate shear walls with precompression from adjacent frame columns. In: The Structural Design of Tall and Special Buildings, v. 28, n. 5 (10 April 2019).
- (2016): Stabilization of Cr(III) wastes by C3S and C3S hydrated matrix: comparison of two incorporation methods. In: Materials and Structures, v. 49, n. 8 (August 2016).
- (2017): The Shear capacity prediction of steel plate shear walls with precompression from columns. In: The Structural Design of Tall and Special Buildings, v. 26, n. 12 (25 August 2017).
- (2018): The Stress state of steel plate shear walls under compression-shear combination load. In: The Structural Design of Tall and Special Buildings, v. 27, n. 6 (25 April 2018).
Structurae cooperates with
