Yang Lv 
- (2024): Improvement of aerogel-incorporated concrete by incorporating polyvinyl alcohol fiber: Mechanical strength and thermal insulation. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Modeling thermal conductivity of aerogel-incorporated concrete: A multi-scale approach. In: Construction and Building Materials, v. 450 (November 2024).
- : Online learning deep neural network fuzzy control of structures under earthquake motions: numerical and experimental test. In: International Journal of Structural Stability and Dynamics.
- (2024): Preparation and properties of porous rice husk ash for internal curing of high performance cement pastes. In: Construction and Building Materials, v. 438 (August 2024).
- (2023): Impact of calcium sulfoaluminate cement on printability and early strength development of a slag-based 3D printing cementitious material. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Photocurable resin as rapid in-situ protective coating for slag concrete against dry shrinkage. In: Construction and Building Materials, v. 396 (September 2023).
- (2024): Flue gas suppression and environmental evaluation of deodorizer-modified rubber asphalt based on radar method. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Finite element simulation of an upliftable rigid frame bridge under earthquakes: Experimental verification. In: Soil Dynamics and Earthquake Engineering, v. 165 (February 2023).
- (2023): Occupant’s thermal responses to asymmetric radiant thermal environment with warm wall and cool ceiling, Part A: Overall thermal responses. In: Energy and Buildings, v. 286 (May 2023).
- (2022): Influence of curing conditions on hydration of magnesium silicate hydrate cement. In: Construction and Building Materials, v. 361 (December 2022).
- (2022): Investigation of sulfate on the migration/solidification mechanism and control of cadmium during sintering in lightweight aggregates. In: Construction and Building Materials, v. 352 (October 2022).
- (2022): A Modified Concentrated Springs Model of Arbitrary Free-Standing Rigid Blocks on Flexible Foundation with Slope. In: International Journal of Structural Stability and Dynamics, v. 23, n. 5 (October 2022).
- (2022): Quasi-static and dynamic properties of unidirectional glass fiber/epoxy laminate for structural strengthening. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2022): Indoor Thermal Environment during Heating Season and the Health of Elderly in China. In: Science and Technology for the Built Environment, v. 28, n. 7 (August 2022).
- (2022): Preparation and evaluation of high-fluid backfill materials from construction spoil. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): Performance‐based seismic design of the outrigger of a high‐rise overrun building with asymmetric vertical setback in a strong earthquake area. In: The Structural Design of Tall and Special Buildings, v. 30, n. 5 (10 April 2021).
- (2021): Indoor-outdoor relationship of PM2.5 mass concentrations in severe cold regions based on a coupled canopy model. In: Sustainable Cities and Society, v. 75 (December 2021).
- (2021): Investigation of fungal contamination in urban houses with children in six major Chinese cities: Genus and concentration characteristics. In: Building and Environment, v. 205 (November 2021).
- (2019): Indoor environment in children’s dwellings in Dalian and Beijing, China. In: Science and Technology for the Built Environment, v. 25, n. 4 (9 April 2019).
- (2020): Potential utilization of copper tailings in the preparation of low heat cement clinker. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Mechanical and hydration properties of low clinker cement containing high volume superfine blast furnace slag and nano silica. In: Construction and Building Materials, v. 238 (March 2020).
- (2019): The influence of ventilation mode and personnel walking behavior on distribution characteristics of indoor particles. In: Building and Environment, v. 149 (February 2019).
- (2020): Preparation for polyacrylic acid modified by ester group in side chain and its application as viscosity enhancing agent in polycarboxylate superplasticizer system. In: Construction and Building Materials, v. 233 (February 2020).
- (2014): Nonlinear seismic damage control of steel frame-steel plate shear wall structures using MR dampers. In: Earthquakes and Structures, v. 7, n. 6 (December 2014).
- (2016): Influence of nano-TiO2 on physical and hydration characteristics of fly ash–cement systems. In: Construction and Building Materials, v. 122 (September 2016).
- (2016): Mechanical and hydration characteristics of autoclaved aerated concrete (AAC) containing iron-tailings: Effect of content and fineness. In: Construction and Building Materials, v. 128 (December 2016).
- (2019): Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification. In: Construction and Building Materials, v. 198 (February 2019).
- (2015): Managing Zn wastes in C3S: comparison of two incorporation methods. In: Materials and Structures, v. 48, n. 8 (August 2015).
- (2018): Fractal crushing of carbonate and quartz sands along the specimen height under impact loading. In: Construction and Building Materials, v. 182 (September 2018).
- (2016): The Influences of the gravity loads on the cyclic performance of unstiffened steel plate shear wall. In: The Structural Design of Tall and Special Buildings, v. 25, n. 17 (10 December 2016).
Structurae cooperates with
