Guangcheng Long 
- (2024): Influencing factors of the temperature rise of direct electric curing concrete and its effect on concrete properties. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Hydration, strength, and microstructure evolution of Portland cement-calcium sulphoaluminate cement-CSH seeds ultra-early strength cementitious system. In: Construction and Building Materials, v. 430 (June 2024).
- (2024): Investigating Concrete Performance: Compressive Strength and Pore-Structure Evolution in Simulated Permafrost Conditions of the Qinghai–Tibet Plateau Zone. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 5 (May 2024).
- (2024): Influence of Molybdenum Tailings Powder on the Hydration Characteristics of Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (June 2024).
- (2024): Laboratory test and meso-scale discrete element modelling on creep behaviors of concrete. In: Journal of Building Engineering, v. 87 (June 2024).
- (2024): Mechanism of graphene oxide concrete macro-micro properties evolution under large temperature difference freeze-thaw action. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Meso-scale analysis on the effect of coarse aggregate properties on the creep behaviors of concrete based on the 3D particle_based method. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Insight into the flexural characteristics of rapid hardening ultra-high performance concrete (RH-UHPC) incorporating C-S-H seeds using acoustic emission technology. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Mechanical properties and crack evolution of SCC with macro-crack under freeze-thaw cycles. In: Journal of Building Engineering, v. 69 (June 2023).
- (2023): Influence of CO2 enhancement of recycled aggregate on microstructure of ITZs in recycled concrete. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Influence of recycled concrete aggregate enhancement methods on the change of microstructure of ITZs in recycled aggregate concrete. In: Construction and Building Materials, v. 371 (March 2023).
- (2023): Influence of direct electric curing on the hydration and microstructure of cement paste excluding ohmic heating. In: Construction and Building Materials, v. 369 (March 2023).
- (2022): Influence of rapid curing methods on concrete microstructure and properties: A review. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2023): Mechanical behavior of bonded interface between steam-cured concrete and SCC under direct shear test: Experimental and numerical studies. In: Journal of Building Engineering, v. 63 (January 2023).
- (2023): Mechanical properties characteristics of high strength concrete exposed to low vacuum environment. In: Journal of Building Engineering, v. 63 (January 2023).
- (2022): Mechanical properties of ultra-high strength cement-based materials (UHSC) incorporating metal powders and steel fibers. In: Construction and Building Materials, v. 318 (February 2022).
- (2022): Mesoscale investigation on concrete creep behaviors based on discrete element method. In: Construction and Building Materials, v. 342 (August 2022).
- (2021): Influence of bubble defects on the bonding performance of the interlayer interface of the CRTS III slab ballastless track structure. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Mechanical evolutionary behavior of steam‐cured concrete under the coupling effect of flexural fatigue and minus temperature. In: Structural Concrete, v. 22, n. 5 (September 2021).
- (2021): Impact resistance of steel fiber-reinforced self-compacting concrete (SCC) at high strain rates. In: Journal of Building Engineering, v. 38 (June 2021).
- (2019): Mechanical property, sorptivity and microstructure of steam-cured concrete incorporated with the combination of metakaolin-limestone. In: Case Studies in Construction Materials, v. 11 (December 2019).
- (2020): Influence of age on the detection of defects at the bonding interface in the CRTS III slab ballastless track structure via the impact-echo method. In: Construction and Building Materials, v. 265 (December 2020).
- (2021): Identifying bonding interface flaws in CRTS III type ballastless track structure using the impact-echo method. In: Engineering Structures, v. 227 (January 2021).
- (2020): Mechanical properties and water absorption of steam-cured mortar containing phase change composites. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): The impact mechanical characteristics of steam-cured concrete under different curing temperature conditions. In: Construction and Building Materials, v. 241 (April 2020).
- (2021): Influence of workability parameters and filling time on the quality of SCC filling layer. In: Magazine of Concrete Research, v. 73, n. 12 (June 2021).
- (2019): Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes. In: Construction and Building Materials, v. 221 (October 2019).
- (2017): The mechanical characteristics of steam-cured high strength concrete incorporating with lightweight aggregate. In: Construction and Building Materials, v. 136 (April 2017).
- (2017): Improved mix design method of self-compacting concrete based on coarse aggregate average diameter and slump flow. In: Construction and Building Materials, v. 143 (July 2017).
- (2016): Mechanical property test and analytical method for Reactive Powder Concrete columns under eccentric compression. In: KSCE Journal of Civil Engineering, v. 21, n. 4 (July 2016).
Structurae cooperates with
