Guangcheng Long 
- (2024): Effect of steam curing regime on the mechanical properties, drying shrinkage, and microstructure of mortar in high-altitude areas with low air pressure. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): Hydration and microstructure evolution of cement paste in low vacuum environments. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Effects of aggregate preheating and polymer fibers on the mechanical, thermal and radiation shielding properties of barite concrete. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Effect of synthesis parameters on the alkali activation reaction degree and the relationship between reaction degree and microstructure of fly ash-based geopolymers. In: Journal of Building Engineering, v. 93 (September 2024).
- (2024): Field detection study of the bonding interface bubble defects in the full scale CRTS III slab ballastless track structure. In: Engineering Structures, v. 304 (April 2024).
- (2024): Experimental study on the flexural fatigue performance of geopolymeric recycled aggregate concrete. In: Construction and Building Materials, v. 418 (March 2024).
- (2023): Experimental study on the static and fatigue splitting failure behaviors of bonding interface between bi-concrete materials. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Effects of shrinkage reducing admixture and internal curing agent on shrinkage and creep of high performance concrete. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Enhancement in strength and toughness of ultra-high performance concrete (UHPC) from micron- and nano-scale. In: Journal of Building Engineering, v. 69 (June 2023).
- (2022): Finite element analysis on properties evolution of slab track FLC under the coupling action of rainfall and fatigue load. In: Engineering Structures, v. 271 (November 2022).
- (2022): Experimental study on dynamic and static structure establishment and recovery rate of fresh cement paste by composite thickening agents. In: Construction and Building Materials, v. 343 (August 2022).
- (2022): Effects of intense ultraviolet irradiation on drying shrinkage and microstructural characteristics of cement mortar. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Experimental investigation on flexural and compressive toughness of mortar and concrete with hybrid toughening materials. In: Structures, v. 43 (September 2022).
- (2021): Hydration and multiscale pore structure characterization of steam-cured cement paste investigated by X-ray CT. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Effects of High Temperature on Creep Properties of Cement and Emulsified Asphalt Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 7 (July 2022).
- (2022): Experimental investigation on mechanical property and microstructure of ultra‐high‐performance concrete with ceramsite sand. In: Structural Concrete, v. 23, n. 4 (May 2022).
- (2021): Green ultra-high performance concrete with very low cement content. In: Construction and Building Materials, v. 303 (October 2021).
- (2021): Effect of surface characteristics of aggregates on the compressive damage of high-strength concrete based on 3D discrete element method. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Experimental investigation on mechanical strength and microstructure of cement paste by electric curing with different voltage and frequency. In: Construction and Building Materials, v. 299 (September 2021).
- (2020): Effects of metakaolin on properties and microstructure of magnesium phosphate cement. In: Construction and Building Materials, v. 234 (February 2020).
- (2019): Hydration kinetics of cement composites with different admixtures at low temperatures. In: Construction and Building Materials, v. 225 (November 2019).
- (2019): Effects of Freeze and Cyclic Load on Impact Resistance of Filling Layer Self-Compacting Concrete (FLSCC). In: KSCE Journal of Civil Engineering, v. 23, n. 7 (April 2019).
- (2019): Effects of freeze and cyclic flexural load on mechanical evolution of filling layer self-compacting concrete. In: Construction and Building Materials, v. 200 (March 2019).
- (2016): Effects of mineral admixtures on shear thickening of cement paste. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Effects of fly ash on mechanical and physical properties of earth-based construction. In: Construction and Building Materials, v. 157 (December 2017).
- (2012): Heat damage of steam curing on the surface layer of concrete. In: Magazine of Concrete Research, v. 64, n. 11 (November 2012).
- (2018): Effect of subsequent curing on surface permeability and compressive strength of steam-cured concrete. In: Construction and Building Materials, v. 188 (November 2018).
- (2018): Effects of metakaolin on a novel aerated magnesium phosphate cement with high early strength. In: Construction and Building Materials, v. 187 (October 2018).
- (2018): Effect of Strain Rate on Compressive Behavior and Modeling of Cement and Asphalt Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 3 (March 2018).
- (2017): Effects of Nanoalumina and Graphene Oxide on Early-Age Hydration and Mechanical Properties of Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).
Structurae cooperates with
