Kang Liu 
- : Investigation on the Seismic Damage and Identification of Lateral Stiffness for Ancient Timber Structures. In: The Structural Design of Tall and Special Buildings.
- (2024): Probabilistic Analysis of the Frozen Depth of Soil Foundations Considering Thermal and Hydraulic Coupling by COMSOL. In: KSCE Journal of Civil Engineering, v. 28, n. 9 (23 July 2024).
- (2024): Fire performance enhancement of cold-formed steel walls: experimental and numerical study. In: Engineering Structures, v. 314 (September 2024).
- (2023): Application Comparison of Different Transient Electromagnetic Devices in Water Exploration of Tunnel Advanced Geological Prediction. In: Journal of Physics: Conference Series, v. 2651, n. 1 (1 December 2023).
- (2024): Experiment and numerical simulation on the performance of multiple unidirectional single‐particle dampers under seismic excitation. In: Earthquake Engineering and Structural Dynamics, v. 53, n. 6 (20 February 2024).
- (2023): Optimization performance for a combined damping system with a TMD and a multiple unidirectional single particle damper. In: Structures, v. 58 (December 2023).
- (2024): Nonlinear mechanical behavior and stress amplification effect correction of thin plate welded structure considering initial deformation. In: Journal of Constructional Steel Research, v. 213 (February 2024).
- (2023): Fire performance of gypsum-sheathed cold-formed steel walls with rectangular section studs. In: Journal of Constructional Steel Research, v. 210 (November 2023).
- (2023): Experimental and practical investigation of reinforcement mechanism on permeable polymer in loose area of drainage pipeline. In: Tunnelling and Underground Space Technology, v. 140 (October 2023).
- (2023): Seismic performance of lap-spliced pre-damaged and intact concrete columns strengthened or retrofitted with UHPC and NSM. In: Engineering Structures, v. 277 (February 2023).
- (2023): Experimental investigation of the quantified influence of gypsum plasterboard joints on the fire performance of cold-formed steel walls. In: Structures, v. 49 (March 2023).
- (2022): Analytical and Numerical Study on the Performance of the Curved Surface of a Circular Tunnel Reinforced with CFRP. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2022): Influence of different gypsum plasterboards on the fire performance of cold-formed steel walls. In: Structures, v. 46 (December 2022).
- (2022): Influence of test parameters on the high-temperature material properties of G550 CFS. In: Journal of Constructional Steel Research, v. 197 (October 2022).
- : Numerical Investigation for the Bearing Performance of the Segmental Joint with Elastic Gasket. In: Periodica Polytechnica Civil Engineering.
- (2022): The impact of temperature and relative humidity dependent thermal conductivity of insulation materials on heat transfer through the building envelope. In: Journal of Building Engineering, v. 46 (April 2022).
- (2022): Seismic behaviour and size effect of column base joints with inverted exposed grouted sleeves. In: Journal of Building Engineering, v. 51 (July 2022).
- (2020): Reliability of Shape Factors for Bearing Capacity of Square Footings on Spatially Varying Cohesive Soils. In: International Journal of Geomechanics, v. 20, n. 3 (March 2020).
- (2021): Postfailure Analysis of Slopes by Random Generalized Interpolation Material Point Method. In: International Journal of Geomechanics, v. 21, n. 3 (March 2021).
- (2021): Seismic performance of precast shear wall–slab joint with and without outer longitudinal reinforcement. In: The Structural Design of Tall and Special Buildings, v. 30, n. 7 (May 2021).
- (2021): Experimental Study of Seismic Mitigation of a Large-Span Cable-Stayed Bridge with Elastic Cables by Shaking Table Test. In: Practice Periodical on Structural Design and Construction, v. 26, n. 2 (May 2021).
- (2021): Seismic Behaviour of Self-Insulating Inner-Framed Bearing Walls with Openings. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 48, n. 8 (August 2021).
- (2020): Research on dynamic constitutive model of ultra-high performance fiber-reinforced concrete. In: Construction and Building Materials, v. 234 (February 2020).
- (2019): Sampling Efficiency in Spatially Varying Soils for Slope Stability Assessment. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2011): Crack Extension Resistance Curve of Concrete Considering Variation of FPZ Length. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 5 (May 2011).
- (2017): Seismic Damage to Structures in the 2015 Nepal Earthquake Sequences. In: Journal of Earthquake Engineering, v. 21, n. 4 ( 2017).
- (2013): Characterization of Mechanically Enhanced FRP Bonding System. In: Journal of Composites for Construction, v. 17, n. 1 (February 2013).
- (2010): Perforated SIFCON blocks – An extraordinarily ductile material ideal for use in compression yielding structural systems. In: Construction and Building Materials, v. 24, n. 12 (December 2010).
- (2009): Numerical Analyses of Hybrid-Bonded FRP Strengthened Concrete Beams. In: Computer-Aided Civil and Infrastructure Engineering, v. 24, n. 5 (July 2009).
- (2018): Automatic multi-image stitching for concrete bridge inspection by combining point and line features. In: Automation in Construction, v. 90 (June 2018).
Structurae cooperates with
